Midea MVC-V12K-GR Vacuum Cleaner Instruction Manual

Midea MVC-V12K-GR Vacuum Cleaner

STRUCTURE OF THE PRODUCT

HOW TO USE

ASSEMBLY BEFORE USE

Fig.1 shows the connection of the hose and the vacuum cleaner:
Put the hose connector in front of the vacuum cleaner .Then insert it into the inlet hole and turn right. If you want to disassemble it, you can turn the hose connection left and then pull it out.
Fig.2 shows the connection of the hose and the extending plastic tube:
Hold the flexural connector of the hose and put it into the bigger hole of the tube. Fig.3 shows the adjustment of the extending plastic tube:
Put the tube into the bigger hole of the other one.
Fig.4 shows the connection of the tube and the brush tool:
Put the plastic tube into the hole of the brush and rotate it to fasten them.
Fig.5 shows how to check the winding of the power cord.
You can pull the power cord out of the machine and stop it when you see the yellow mark. Make sure the red mark is not out. When your sweep is over, first turn off the power, pull the plug out of the socket, and then push the winding device button until the cord is completely in the machine.
Fig.6 shows the power button
Put the plug into the socket, push the power button to control the work of the machine.

CLEANING OF THE DUST CHAMBER

The steps of the chamber cleaning:

1. As in Fig.7, hold the dust chamber and handle and push the release button.
2.  As in Fig.8, take the dust chamber out of the machine.
3.  As in Fig.9, put the dust chamber onto the rubbish bin, push the release button to open the bottom of the dust chamber, and the dirt and dust will fall into the bin by themself.
4.  As in Fig.10, shut up the dust chamber for a circular use after your cleaning.
5.  If the dust in the chamber is over the MAX line and you feel the suction force is fallen down, please turn off the power and whirl the self-cleaning knob more than two circles, so you will find the suction power return to the prime level.

ATTACHMENTS

HOW TO USE THE ATTACHMENTS:

1. As in fig.11, you can use the compressed brush in the corner and the aperture.

2. As in fig.12, open the other side with bristles of the compressed brush as the mark of an arrow to clean the sofa, the curtain and the dust on the ornaments.

3.  As in fig.13, tread on the pedal of the brush tool to let the bristles out, and you can clean the floor.

4. As in fig.14 , tread on the pedal of the brush tool again to put the bristles in, and you can clean the carpet.

MAINTENANCE

1. The filter should be cleaned twice a year, and when there is obvious dirt on the filter, it is time.

2. You must fix the filter properly before running the vacuum cleaner.

3. The filter can’t be cleaned in the washing machine or baked by the blower.

4. It will reduce the suction power and damge the motor if you use the wet filter.

5. Steps for maintenance:

6. As in fig.15, press the outlet lock to open the outlet board.

7. As in fig.16, get out the outlet filter.

8. As in fig.17, rotate the HEPA cover to separate it from the chamber cover

9. As in fig.18, get the HEPA cover

10. As in fig.19, get the HEPA and wash it.

11. Wash the HEPA cover, the HEPA assembly, the outlet sponge and the dust chamber in the water without detergent and dry them before use.

12. Fix the HEPA assembly on the chamber cover and make sure three salient cubes should be stuck in the grooves of the dust chamber.

13. Rotate the HEPA assembly in the direction of the mark on the chamber cover.

14. Assemble the chamber cover assembly and the dust chamber according to the
    mark outside.

15. Put the dust chamber assembly into the machine. And in this process, first you should make the chamber in the right position and then press the handle of the dust chamber, if there is a cluck it means the operation is successful.

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>