MIGRO 160 Series Wireless Transceiver Instructions
- June 3, 2024
- MIGRO
Table of Contents
MIGRO 160 Series Wireless Transceiver
After the battery is full charged
-
Turn on the Radio,
Message ”FREQUENCY MODE” -
Enter the desired frequency
By Example Key in 1 6 0 1 0 0 -
Turn OFF the Transceiver
-
Turn ON the Transceiver
-
The 160000 is set.
NOTE initial Mode selection
Press and HOLD the Menu button and turn on the Radio Frequency MODE or “TELL MODE” message will come up,Repeat the operation to set the radio in “FREQUENCY MODE”
RECEIVER
Before you apply power
- connect the Antenna,
- insert the Microphone
- Power the radio ON
- On the Microphone keypad click on the A/B button Move the arrow to the upper section of the display
Key in the frequency by example 1 6 0 1 0 0
- Turn the Power OFF
- Turn the Power ON
- Your selected frequency will appear at the top of the display Turn the Power OFF
- Remove the Microphone.
- System is Ready
For information consult the manufacturers Transceiver Manuals
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>