MIGRO M924050 Smart Wi-Fi Controller User Manual

: June 6, 2024
: MIGRO

Table of Contents

System Features
Contact Load Ratings
WIRING & PAIRING
System Features
Sample Applications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Smart Wi-Fi Controller

ATTENTION !!!
Connect to Wi-Fi Network Indoors Prior to Installation

Ensuring your MIGRO® Smart Wi-Fi Controller is functioning prior to field installation is required by the manufacturer. Environmental and application- specific conditions may cause communication errors and manufacturers. Environmental and application-specific conditions may cause communication errors and a bench test will ensure that the equipment is functioning properly. Connect a 240VAC Power Supply to the System and perform the pairing steps to ensure connection. (see pairing instructions)

WARNING

This Smart Box system should be installed by a LICENSED ELECTRICIAN. Turn Power off at the main panel before servicing this switch or the equipment it controls.
Wiring must be in accordance with all national and local electrical code requirements.
This Smart Box Enclosure does not provide grounding between conduit connectors.

Installation Instructions
Your Wi-Fi control system must be installed and maintained as described in this guide to ensure reliable and safe operation. Conﬁrm the voltage and current draw of your connected load to the control output is consistent with the design speciﬁcations of this product and that your application will not exceed the maximum load capacity listed.

System Features

Wi-Fi ENABLED CONTROLS
Use mobile apps as well as Google and Alexa to your system on/off or scheduling
BEYOND SCHEDULING
Use the Google, Alexa, and IFTTT capabilities to control your systems by weather, workﬂow Geo-fencing, and others.
MANUAL ON MODE
“Manual ON” mode will give you the ability to run your system regardless of the Wi-Fi control status.
OVERRIDE OFF MODE
This model provides users with great safety protection. The OFF mode will remain OFF regardless of Wi-Fi controls.
Additional Data:
Power Supply: 220/240VAC
Relay: DPST
Security: WEP/WPA-PSK/WPA2-PSK
FCC Part 15 IEEE 802.11 b/g/n
Wi-Fi Frequency: 2.412-2.48GHz

Contact Load Ratings

Normally Open
50 A. Incandescent or Resistive Load AC1
40 A. Ballast and General Purpose AC3
10HP @240V, 15KW 277VAC
40 A. Ballast 7 KW@ 220VAC
UL Rated
NEMA Standards

Installation Instructions

CONDUIT FITTING
Install the Conduit Fitting provided (or one provided by others) in the desired location ensuring wire clearance within the enclosure.
ANTENNA
Install the Antenna provided onto the threaded connector located on the outside of the enclosure.
MOUNT TO DESIRED LOCATION
Place and mount the enclosure to your desired location using the supplied hardware. The brackets are to be mounted to the back exterior of the enclosure with the wall ﬂanges facing out. (See Image 1)
WIRE THE SYSTEM
Wire in accordance with the national and local electrical codes (see wiring diagram). After wiring is complete, turn the circuit power on and test your MIGRO® Mi-Fi Switch.
Manual Override:
Momentarily press the small BLACK button located on the white Sonoff smart WiFi switch module.

IMAGE 1. Mounting Brackets

WIRING & PAIRING

System Features

Wi-Fi ENABLED CONTROLS
Use mobile apps as well as Google and Alexa to your system on/off or scheduling
BEYOND SCHEDULING
Use the Google, Alexa, and IFTTT capabilities to control your systems by weather, workﬂow Geo-fencing, and others.

PAIRING TO WI-FI NETWORK
To Connect your MIGRO® Smart Wi-Fi Controller to your app and Wi-Fi Network, please refer to the eWelink instructions or Scan the QR Code below.

Scan for INSTRUCTIONS

https://qrco.de/bbLtDM

TIPS

Install the antenna as high as possible, clear from obstructions or metal structures.
Ensure that your WiFi Router is placed as high as possible to maximize range and coverage.