MIGRO 240 VAC Wifi Smart Controller eWelink App Connection User Guide

MIGRO 240 VAC Wifi Smart Controller eWelink App Connection User Guide

Follow the Steps below to connect to your MIGRO Wi-Fi Smart Controller

1. Download and install the eWelink APP
   You may Scan the QR Code below to download eWeLink.
   
   Or Search “eWeLink” in APP Store for iOS version or Google play for Android version
   [

](https://www.ewelink.cc/en/)

2. If required, register a new account
   You`ll need to enter your phone number/email address and a password (at least 8 characters). Enter the SMS verification code to register.

3. Login to your account.

4. Add devices

   • Power up Your MIGRO Smart WiFi Controller after you complete the APP installation.
   • On the white Sonoff Smart Switch, Press the black button for 7 seconds until the green LED blinks rapidly. Open eWeLink app, click”+”, you’ll see the pairing icons. Please select the pairing mode according to below instructions:
     Once the Green LED is Blinking:
   1. Select the Quick Pairing Mode (TOUCH). Otherwise, it will fail to add the device. Click Next.

   • It will auto-search and connect smart home device around you.
     

   • Input your home SSID & password:

   • Note that eWeLink only supports 2.4GHz Wi-Fi communication protocol, 5GWiFi networks are not supported.

   • Name your Device to complete setup.
     If the Device status is “Offline” on eWeLink, the device may require up to 1 minute to connect to your router and server. If the green LED on, the device is “Online”, but eWeLink still shows “Offline”, please close the eWeLink and re-open.

5. APP Features

6. WiFi Remote Control and Device State Turn your Device on off by tapping on device icon. Device State will always Display on the APP

7. Share Control of your Device with others

Click the Share icon, input the eWeLink account (phone number or email address) with whom you want to share. Toggle the account holders’ permissions (edit/delete/change/enable) you would like to give, then click Next. The account holder will receive an invitation message. They must Click Accept; the device has shared successfully. The other user will now have access to control your device.

3.  **Scheduling your Device**  

eWelink Supports a maximum of 8 enabled single/repeat/countdown timing schedules for each device

4.  **Set Default Power Status**  

In Device Settings, you can set default device status: ON or OFF when the device is power on.

5.  **Scene/Smart Scene**  

Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the device.
Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

6.  **Updates**  

The APP will notify you of any new firmware or APP versions. Please update as soon as you possible.

Don’t Forget to Connect your eWeLink Account to

Documents / Resources

| MIGRO 240 VAC Wifi Smart Controller eWelink App Connection [pdf] User Guide
240 VAC Wifi Smart Controller, eWelink App Connection
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>