tp-link RE750C Wi-Fi Range Extender User Guide

: September 29, 2024
: tp-link

Table of Contents

RE750C Wi-Fi Range Extender
Specifications:
Product Usage Instructions:
1. Power On
2. Set Up
3. Relocate
- FAQ:
Q1: What should I do if I cannot find my device during
Q2: What should I do if the Signal LED does not turn solid on

RE750C Wi-Fi Range Extender

“`html

Specifications:

Product: Wi-Fi Range Extender
Manufacturer: TP-Link
Model: [Insert Model Number]
Frequency Bands: 2.4GHz, 5GHz
Wireless Standards: IEEE 802.11 b/g/n/ac

Product Usage Instructions:

1. Power On

Plug the extender into a power outlet next to your router. Wait
for the Power LED to turn solid on.

2. Set Up

Method 1: Via the WPS Button

Activate the WPS function on your router by pressing the WPS
button.

Method 2: Via the Tether App

Get the Tether app from the app store or scan the QR code.
Launch the Tether app and log in with your TP-Link ID.

Method 3: Via a Web Browser

Connect your device to the extender’s network.
Press the WPS button on the extender and wait for LEDs to turn
solid blue.
Log in to http://www.tplinkrepeater.net to complete the
setup.

3. Relocate

Place the extender halfway between your router and Wi-Fi dead
zone.
Wait for Signal LED to turn solid blue for optimal
performance.

Enjoy your extended network with the same password as your main
router.

FAQ:

Q1: What should I do if I cannot find my device during

setup?

If you cannot find your device, please refer to the FAQ section
for troubleshooting steps.

Q2: What should I do if the Signal LED does not turn solid on

after setup?

If the Signal LED does not turn solid on, please refer to the
FAQ section for troubleshooting steps.

“`

Quick Installation Guide
Wi-Fi Range Extender

1 Power On
Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on after blinking for a while. Note: For safety, only plug the extender in the direction as shown below.

Next to

Solid On

Setup with videos
Scan QR code or visit https://www.tp-link.com/support/setup-video/#range- extenders and search for the setup video of your model.

2 Set Up
Method 1: Via the WPS Button
1. Activate the WPS function on your router by pressing the WPS button.
Note: If you don’t know how to do it, refer to your router’s user manual, or you can use other methods to set it up.

Method 2: Via the Tether App
1. Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code.

The WPS button might look like one of these:

or
Scan for Tether

Tether

Method 3: Via a Web Browser
1. Connect your computer or smartphone to the extender’s network TP- Link_Extender.
TP-Link_Extender

2. Within 2 minutes, press the WPS button on the

2. Launch the Tether app and log in with your TP-Link ID.

extender for 1 second, and the Signal LED starts

If you don’t have an account, create one first.

blinking. Wait for the Signal LED, 2.4GHz LED and 5GHz

LED to turn solid blue, indicating a successful connection.
Note: If only the 2.4GHz or 5GHz LED is solid blue, check to see if the router has both 2.4GHz and 5GHz bands turned on. If both are turned on, try WPS again or use other methods.

3. Tap the button and select Range Extender.
Notes: 1. If you cannot find your device, please refer to FAQ > Q1. 2. Due to Tether app updates, your actual user interface and pathway may differ from those depicted here.

Blinking

Solid On

3. Done. You can connect to the extender’s Wi-Fi.
Extended Network Names: Router’s network name with _EXT at the end or Same as your EasyMesh router (see back for EasyMesh details) Passwords: Same as your router

My Devices
No devices found.
Choose Your Device Type Wireless Router Gaming Router Range Extender
4. Follow app instructions to complete the setup. The Signal LED should turn solid on, indicating successful connection to your router.
Note: If the LED does not turn solid on, please refer to FAQ > Q2.

2. Visit http://www.tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in.

http://www.tplinkrepeater.net

Create Password

Low

Middle

High

Confirm Password

Start

3. Follow web instructions to complete the setup.

Solid On

3 Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.

2. Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn’t, relocate the extender closer to the router to achieve better signal quality.

Tip: To place the extender for optimal Wi-Fi performance, access extender settings

.

via the Tether app and go to find Location Assistant, or simply scan the QR code to

visit https://www.tp-link.com/support/faq/3103/.

Router

Blue: Suitable location Red: Too far from router

Halfway

Devices

Enjoy!
· Connect your devices to the extender wirelessly or via an Ethernet cable,
then enjoy the internet. The password of your extended network is the same as your main router.
· You can also change the extender to Access Point Mode to transform your
existing wired network to a wireless one. For details, see Access Point Mode (AP Mode) on the back page.

Smartphone

Tablet

Laptop

Smart TV Game Console Desktop

Access Extender Settings
After setup, you can access extender settings via any of the methods below. You can reselect main network, change extended network settings and more.
Note: If your extender and router use the same network name, Method 1 is recommended.
Method 1: Via the Tether App
1. Connect your smartphone to the extender`s or router’s network. 2. Launch the Tether app, select your extender, and log in. 3. Manage the extender as needed.
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any. 2. Launch a web browser, enter http://www.tplinkrepeater.net in the address bar, and log in.
3. View or change extender settings as needed.
EasyMesh-Compatible
You can experience strong, stable, and seamless wireless connections throughout your home with EasyMesh, a whole home mesh standard that works across different access points for ultimate flexibility.
Seamless Roaming Connects mobile devices to your routers or extenders that provide the best coverage. Devices compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room. One-Click Settings Press the WPS button on the main router and the extender within 2 minutes of each other, then the EasyMesh network will set up.
Flexible Scalability Flexibly scale your home networking with different vendors, different topologies, different Protocols and different product categories.
TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh. Failed connections may be due to firmware conflicts of different vendors. The EasyMesh-Compatible function is still being developed on some models and will be supported in subsequent software updates. This product is compatible with standardized EasyMesh technology but has not obtained the Wi-Fi EasyMeshTM certification.

For more information, visit https://www.tp-link.com/easymesh/.

Scan for Setup Video

LED Explanation

LED Power
Signal
2.4 GHz 5 GHz

Status On/Off Blinking
Solid blue Solid red Blinking
Off
On/Off
On/Off

Indication (For Range Extender Mode)
The extender is on or off. The system is starting up or firmware upgrade is in progress.
The extender is connected to your router’s wireless network and is in a suitable location. The extender is receiving a weak signal. Try relocating it closer to your router. WPS connection is in progress. No wireless connection is established.
The extender is connected or not connected to the 2.4 GHz wireless network of your router.
The extender is connected or not connected to the 5 GHz wireless network of your router.

Access Point Mode (AP Mode)
Stable wireless performance and wired connection with a main router required. To change your extender to Access Point Mode, do the following:
a. By Web: Login Find the Mode button on top. For details, refer to the user guide at https://www.tp-link.com/support.

English

Mode

Logout Reboot

b. By Tether: Login to your extender Find the Operation Mode Note: Due to Tether app updates, images may differ from your actual user interface.
Operation Mode

Network

More

Q1. What should I do if the Tether app cannot find my device during setup?
Try another method by following the steps below: 1. Connect your smartphone to the extender’s network TP-Link_Extender.
< Settings Wi-Fi
Wi-Fi CHOOSE A NETWORK… TP-Link_Extender
2. Launch the Tether app, and select your extender.
Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, try turning off your cellular data.
My Devices
Local Device RExxx XX-XX-XX-XX-XX-XX
3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support.
Q2. What should I do if the Signal LED doesn’t turn solid on after completing setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi password for your host router during the configuration. Check the password and try again. Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances. If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration. Try setting it up via the WPS button. Reset the extender and go through the configuration again. If you are still having problems, contact our technical support.

Q3. How do I reset the extender?
With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot.
RESET
If you need more setup help, please visit https://www.tp- link.com/support/faq/3074/, or simply scan the QR code.
Safety Information
· Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. · Do not use the device where wireless devices are not allowed. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www .tp-link.com/support/ukca
For technical support, replacement services, user manuals and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
AC750 Wi-Fi Range Extender Model: RE750C