World HB733 Wireless Display Adapter User Guide

HB733 Wireless Display Adapter

Product Specifications

• Brand: World Pass Industrial Co., LTD

• Part Number: HB733

• Name: Wireless Display Adapter

• Interface: HDMI

• Wireless: 5G WiFi

• Maximum Resolution: 1080P

• Transmission Distance: 30 meters

• Supported Devices: Laptops, PCs, tablets, mobile phones,
  etc.

• Features: Supports replication and extension modes, PD3.0 fast
  charge (up to 20V, 5A, 100W)

• Combo Chips: AM8360D+CS5266BN+AM9421BU*2+AM8268D

Product Usage Instructions

1. Setup

Before using the Wireless Display Adapter, ensure that your HDMI
output device is compatible with the adapter.

2. Connection

Plug the adapter into the HDMI port of your TV, display, or
projector. Ensure a clear line of sight for optimal wireless
transmission.

3. Switching Modes

Use the switch on the transmitting end to toggle screen
projection mode. The receiver switch is for transmitting and
receiving purposes.

4. Charging

If needed, connect the adapter to a PD3.0 fast charge power
source using the provided specifications for fast charging.

5. Replication and Extension

The adapter supports both replication and extension modes for
versatile display options.

Frequently Asked Questions (FAQ)

Q: What is the maximum wireless transmission distance?

A: The maximum barrier-free wireless transmission distance is 30
meters.

Q: Can this adapter be used with mobile phones?

A: Yes, the adapter is compatible with mobile phones along with
laptops, PCs, and tablets.

Q: Is the adapter suitable for outdoor use?

A: The compact design of the Wireless Display Adapter makes it
highly portable and suitable for outdoor business
presentations.

World Pass Industrial Co.,LTD

P/N

HB733

Name

Wireless Display Adapter

1. HDMI Wifi 5Gwifi
This product is suitable for HDMI interface output TV, display, projector, plug and play, no external Wifi and network; High-speed wireless video transmission with built-in 5Gwifi; 2.HDMI HDMI PC,,
This compact Wireless HDMI Display Dongle Adapter is highly portable and perfect for outdoor business presentations. Its powerful chipset ensures compatibility with a wide range of HDMI output devices, including laptops, PCs, tablets,mobile phone and more. It is suitable for various settings such as conference rooms, home entertainment, and multimedia education. 3. 30M
Maximum barrier-free wireless transmission distance: 30M 4.HDMI1080P
HDMI supports a maximum resolution of 1080P 5. Switch
This product has a Switch switch at the transmitting and receiving ends. The switch at the transmitting end supports one-click opening and closing screen projection mode. The receiver switch is mainly used for transmitting and receiving. 6.HDIM This product supports both replication and extension modes 7.PD3.020V.5A.100W This product supports PD3.0 fast charge, up to 20V.5A.100W

MAC OSWindowsAndroid

Combo Chips:

AM8360D+CS5266BN+AM9421BU*2+AM8268D

CS5266BN

PD+ PD+ video chip

AM8360D

SoCHighly integrated mixed-signal SoC video processor chip at the transmitter end

AM8268D AM9421BU

SoC Receiving end highly integrated mixed-signal SoC video processor
chip
WiFi WiFi module main chip

Interface specification

HDMI Maximum resolution 1080P

Shell description
TX (TX Size)

+ Sandblasted anodized Sliver+Plastic White 60H15.1mm(Plastic) + L20W10.9*H6.0mm(Aluminum)

RX (RX Size) L30.3W18.5H10mm(Aluminum) + L27.5W18.5H10mm(Plastic)

1. Before use, confirm whether the equipment can meet the corresponding requirements 2. PIN Make sure that the PIN pin in the product does not sink or bend 3. Be careful not to splash liquid into the connector during use 4. Products should be placed in a dry place, do not place in a humid environment 5. 5 Product connector interface hot swap interval at least 5 seconds (for the product used)

FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Absorption Rate (SAR) information: This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a appropriate separation distance between the user’s body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>