AURZEN BOOM 3 in 1 Projector 4K Supported User Manual

AURZEN BOOM 3 in 1 Projector 4K Supported

BOOM 3
USER MANUAL

North America/Other Regions: support@aurzen.com / Europe: support.eu@aurzen.com Japan: support.jp@aurzen.com
North America/Europe/Other Regions: 667-218-4830 | Japan: +81 50 5806 9331

IN THE BOX

PROJECTOR OVERVIEW

Projector

Notes

• To optimize the sound quality, please remove the back cover before using the projector When the projector is not in use, remember to reattach the cover
• To ensure an optimal audio quality experience and prevent damage to the speakers, please DO NOT press four speakers and the auxiliary bass radiator!

Remote

• Power Button:
  • Press once: Turn on the projector.
  • Press twice: Turn off the projector.
• Mute: Silence the projector’s audio .
• Input Source: Press to access the input source page and select your preferred input source.
• Focus: Press and hold these two buttons to make precise focus adjustment.
• Left/Right/Up/Down: Navigate menus or adjust the selected content.
• OK: Confirm selection.
• Back: Go back to the previous menu.
• Home: Return to the homepage.
• Settings/Menu: Press to access the setting page or open the menu.
• Volume+/-: Increase/decrease the projector’s volume.
• Shortcut to NETFLIX: Press to launch the NETFLIX opp.
• Shortcut to YouTube: Press to launch the You Tube opp.
• Shortcut to prime video: Press to launch the prime video opp.

QUICK START

Projector Installation

Notes:

• Whichever installation option you select, please make sure:
  To go to Homepage> Setting > Picture> Projection Mode to select the corresponding projection mode, so the images can be projected correctly.

• Mounting Screw: 1/4″ (not included)

Power On/Off

• Take off the protective film.
• Connect the power cable to an outlet .
• Press the power button once to turn on the projector.
• Press the power button twice to turn off the projector.

Note:
To prevent the power cable from accidentally disconnecting or loosening when moving the projector, please ensure it is firmly plugged into the power port before turning on the projector.

Remote Control Pairing and Setup Wizard

• The projector automatically adjusts image clarity and corrects image shape upon powering on.
• Afterward, follow the setup wizard to pair the remote control with the projector, choose your preferred language, establish a WiFi connection, and access the homepage.

Steps for Remote Control Poiring:

1. Hold the remote control close to the projector.
2. Simultaneously press and hold the Volume+ and Volume – buttons for approximately 10 seconds.
3. Once the LED indicator on the remote flashes quickly, the pairing is successful.

Notes

• Please ensure to install 2 pieces of AAA batteries in the remote control first.
• Please pair the remote control with the projector via BT before use.
• If you skip the pairing steps, you can go to the homepage and select to enter the pairing page again.

Images Adjustment

1. Auto Focus
   When the projector is powered on, it will automatically adjust the image quality.

2. Electric/Manual Focus
   You can also press and hold the focus buttons on the remote control to sharpen the image focus until the blurry image becomes clear.

Keystone Correction

1. Auto Keystone Correction
   When the projector is powered on, it will automatically correct the keystone distortion.

2. Manual Keystone Correction
   Press the button on the remote, then select Manual Keystone Correction to manually correct the image shape by four points.

Tip
When the projector detects shaking/rapid movement, it automatically adjusts the focus or corrects the keystone. If the image is still ! unclear or not square, use the remote control’s focus buttons or four-point keystone correction for manual adjustments.

PROJECTOR CONNECTION AND INPUT SOURCE

Connect your device to the projector correctly, then select the right input source.

USB Connection: Insert the disk, then select the USB icon on the upper right comer of the homepage or go to Homepage> My Apps > Resource Manager to locate and play the file.
HDMI Connection: Connect the device, then press the button on the remote control and select HDMI 1 or HDMI 2.
Wired Speaker and Headphones Connection: Not required to select any input source.

Notes

• HDMI®, the HDMI® logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
• Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
• For gaming, a wired HDMI connection is recommended due to faster processing and reduced audio-visual delays compared to wireless screen mirroring.

WIFI CONNECTION
You can connect your projector to your router’s WiFi by accessing the setup wizard or clicking on the WiFi icon on the homepage.

SCREEN MIRRORING

For Android System
To activate this function, please make sure your Android device supports Multi-screen/Smart View/Wireless Display. Names vary on different Android devices.
Step 1: Go to the WiFi setting of your Android device to switch on the option of Wi-Fi.

Notes

• It is not necessary to have a successful WiFi connection, but it is important to ensure that the WiFi is turned on in your Android device.
• Copyrighted content from Hulu, Disney+, or other similar streaming services CANNOT be wirelessly mirrored or screen cast due to copy rig ht restrictions.

Step 2: Go to Homepage> My Apps > Screen Cast Assistant to enter the interface below.

Step 3: Activate the Multi-screen/Smart View/Wireless Display function on your Android device and search for the projector.
Step 4: Choose AURZEN_PRJ from the list, and once the connection is successful, the content on your Android device will be mirrored onto the projection screen or wall.

DLNA

• Step 1: Connect the projector and your mobile device to the same router’s WiFi.
• Step 2: Go to Homepage> My Apps > Screen Cast Assistant and then select DLNA to access the following page.
• Step 3: Launch a video player App on your mobile device and select a video to play.
• Step 4: Tap to search for the projector and select AURZEN_PRJ to connect.

The content on your device will be cast to the wall/screen.

Note:
When you cast a video from your mobile device, the video will only be displayed on the projected screen and you can still use your mobile device without interrupting the video or showing any of your other content.

For iOS System

Step 1: Connect the projector and your mobile device to the same router’s WiFi or directly connect your mobile device to the projector’s AP hotspot.

Notes

• When you are using the projector’s AP hotspot, the content will be mirrored using cellular data.
• Copyrighted content from Hulu, Disney+, or other similar streaming services CANNOT be wirelessly mirrored or screen cast due to copyright restrictions.

Step 2: Go to Homepage> My Apps > Screen Cast Assistant and then select MagicCast to access the following page. Next, select Go to download to download and install the MagicCastApp.
Step 3: Launch the MagicCast App and remain on the following page.
Step 4: Go to the Control Center of your iOS device, then tap Screen Mirroring/Air Playing to search for the projector.

Step 5: Choose AURZEN_PRJ from the list, and once the connection is successful, the content on your iOS device will be mirrored onto the projection screen or wall.

USE AS A BT SPEAKER

It is possible to use this projector as a BT speaker by connecting your mobile device to it through a BT connection.

Step 1: Take off the Detachable Back Cover from the projector and directly see the speakers .

Step 2: Go to Homepage> My Apps > BT Music to make the projector ready for a BT connection. Step 3: Access your mobile device’s BT settings and activate BT. Search for

AURZEN_PRJ in the available devices list to pair your mobile device with the projector.

Tip: Press on the remote to exit BT Speaker mode.

PROJECTION DISTANCE AND SIZE

Notes

• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector as needed.
• For optimal image quality, we recommend a projection size of 60 to 80 inches. Position the projector 5.88 to 7.84 feet away from the wall or screen.
• Ambient darkness will improve the clarity of the projected images.

E-MANUAL
To access the on line user manual for future reference, follow these steps:

Step 1: Go to the homepage.
Step 2: Navigate to My Apps.
Step 3: Click on the E-manual option.

EXPLANATION OF APPS

1. You can’t download the apps on the APP STORE platform, but you can log into your account to watch the contents directly.
2. You can download some apps in the App Assistant and log into your account to watch the content directly.
3. Once you’re on the My Apps page, you can press and hold the OK button, then use the buttons to move the opp and set up your favorite apps.

SPECIFICATIONS

576i/576P/720i/720P/1080i/1080P/4K
Aspect Ratio| 4:3/16: 9/Auto| Focus| Auto and Electric/Manual
Keystone Correction| Auto Keystone Correction| Installation Options| Front/Rear/Ceiling
Power Supply| AC 100-240\/, 50/60Hz| Unit Dimension| 8.9×8.3×6.1inches(225x210x156mm)
Unit Net Weight
Audio Format Supported
Ports
| 5.5Ib(2.5kg)
OGG/AAC/MP3/FLAC/WAV
HDMI In x2/USB Port x2/Audio Out x1| Photo Format Supported
Video Format Supported
Mounting Screw
| JPG/PNG/ BMP/GIF/JPEG
MKV/MP4/FLV/MOV/M2TS/AVI/ TS/M PG/3GP/M PEG1
1/4″

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

The symbol indicates class Il equipment
The symbol indicates AC voltage
The symbol indicates DC voltage
For indoor use only
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The mains plug is used as the disconnect device. The socket-outlet shall be installed near the equipment and shall be easily accessible.
EU Compliance Statement: Shenzhen Neutop Optoelectronics Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available on line at https://cdn.shopify.com/s/files/1/0720/5109/7892/files/Boom_3_Neutop_Declaration_of_Conformity.pdf?v=1712723390

Scan to access E-Manual (EN)

Email
North America/United Kingdom/Australia/United Arab
Emirates: support@aurzen.com
Europe: support.eu@aurzen.com
Japan: support.jp@aurzen.com

Phone
North America/Europe/Other Regions: 667-218-4830
Jaban: +81 50 5806 9331

V1.02

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>