Ataller CK-2150 Coffee Scale User Manual
- June 14, 2024
- Ataller
Table of Contents
Coffee Scale USER MANUAL
Model No.: CK-2150
Specifications
1-1. Default unit: g
1-2. Switch button:
1-3. Auto off time: about 180s without any operation or after stopped timing.
1-4. Manual on/off : Keep pressing button for 2s
1-5. Min weight indication: 1g
1-6. Capacity: 3000g
1-7. Overload value: 3600g
1-8. Graduation: 0.1g, 0.00507, 0.1ml
1-9. Power on display: 1-10. Power: Lithium-ion rechargeable 3.7V 250mAh.
1-11. Beep sound: Along with operation of two buton and
1-12. Tare Operation: On weighing mode, press to Tare and Zero
Sign Tips
2-1. Insert USB cable for charging, the below icon on display is blinking. 2-2. Usually it will take 2-5 hours for full charging, the scale will show FULL as below after fully charge. 2-3. After fully charge, pull out the USB cable, LED display as below. 2-4. When the scale is overloaded: 2-5. When the voltage of the battery is too low, and the scale is unable to work, please charge it in time. 2-6. Weight unstable indication, please put it on a hard and flat surface.
Unit Conversion
3-1. When powered on, the scale will show unit from last use.
3-2.1f the user need to switch the unit, keep short pressing button for 2s to
change the unit between g-oz-ml.
Timer operation (2 timing modes for option)
A. Manual timing mode operation
4-1.Press button to turn it on, after a full display and the scale reset to
zero, it means ready for weighing press button to start timer function, The
timer display from 0 to 99m:59s in cycle and will auto off. 4-2.0n timer mode,
short press button to stop, touch it again to continue.
4-3,0n Timer mode, press button twice to exit manual timing mode B. Auto
timing mode operation
4-1. Press button to turn it on, after a full display and the scale reset
to zero, it means oumiig ready for weighing, short press button twice to enter
auto timing mode
4-2. Put a hand-brewed coffee equipment on the scale for weighing, after 43,
Load hand-brewed coffee equipement with few coffee powder, press button to
resetscale to zero. 4-4. Pour water into hand-brewed coffee equipment, the
scale starts timing automatically. 4-5. After removing all weights, the scale
will reset to zero automatically. 4-6. The scale will be auto off after 180
seconds without any operation and stopped timing
How to exit auto timing mode
On auto timing mode, short press button twice to exit auto timing mode.
Weighing Operation
5-1. Put the scale on the flat and hard surface, press button for 2s to turn it on. After a full display, you will see zero, which means the scale is ready to weigh.
Caution
6-1. DON’T disassemble this device. If you have any problems, please contact
us.
6-2. A 250mAh lithium-ion rechargeable battery is built in the scale.
Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding
disposal of the worn batteries.
6-3. Do notuse during charging.
6-4. This product is powered by a lithium battery. DO NOT charge after its
power is used up. It is recommended to charge it in time after it indicate low
battery.
Warranty
Ataller warrants all products to be of the highest quality in material,
craftsmanship, and service, effective from the date of purchase to the end of
the 2-year warranty period.
https://www.ataller.com/
Email: service@ataller.com
https://www.ataller.com
*Please have your invoice and order ID ready before contacting Customer Support.
Ataller
Shenzhen Guangdong
China 51800
info@ataller.com
service@ataller.com Version: KP-26020230001