SEACHOICE 19473 Live Bait Aerator Kit 350 GPH Instructions
- September 28, 2024
- SEACHOICE
Table of Contents
SEACHOICE 19473 Live Bait Aerator Kit 350 GPH
Specifications
- Model: 19473
- Product Name: LIVE BAIT AERATOR KIT 350 GPH
- Switch Dimensions: 4.35 in x 5.95 in (110.6 mm x 142 mm)
- On-Off Panel Switch Dimensions: 1.4 in (360 mm)
- Wire Gauge: 18 gauge for installations up to 20 feet, 14 gauge for installations over 20 feet
Installation
- Clean the surface of sand, grease, etc, and press pump suction cups firmly in place.
- The spray tube may be removed and shortened if necessary.
- If the battery is close enough, clip wires to the battery with the battery clips provided. If additional lengths of wire are needed, use 18 gauge wire. On installation over 20 feet, use 14 gauge wire. Make sure all wire connections are completely waterproof, and out the water.
- The black lead is negative(-), attach the black lead to the negative(-) side of the battery. The brown lead to the positive (+) side of the battery. Install a 2.0 amp fuse in the positive (+) lead as close to the battery as possible.
Switch Operation
To turn the aerator kit on or off, use the On-Off Panel Switch located on the product. Ensure proper grounding for safe operation.
FAQs
Q: Can I use a different gauge wire for installation?
A: It is recommended to use 18 gauge wire for installations up to 20 feet and
14 gauge wire for longer distances to ensure proper power supply and safety.
Q: How do I know if the connections are waterproof?
A: Ensure all wire connections are sealed with appropriate waterproof
materials and kept out of direct contact with water to prevent damage and
maintain functionality.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>