SEACHOICE 18291 Imbornal Autovaciant Black Installation Guide
- June 6, 2024
- SEACHOICE
Table of Contents
SCUPPER
INSTALLATION INSTRUCTIONS
- Mount gasket and scupper over existing drainage hole using silicone around back of gasket.
- Drill screw holes using 5/32” drill bit.
- Screw scupper and gasket into place using #10 x 1″ or #10 x 34″ Oval head screws.
Note:
- Gasket hole must be on top
- Scupper drain hole must face bottom of hull (down, as shown in photo)
Not liable for any improper installations. All boat repairs/modifications should always be performed by a licensed and insured professional.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>