EKOBOR I-Easy Desk Dual Motor User Manual
- October 27, 2023
- EKOBOR
Table of Contents
I-Easy Desk Dual Motor
User Manual
Touch Button Instruction
Reset Operation (RST)
Press the DOWN button for 30-40 seconds, kindly ensure not obstacles underneath the desk, continue to descend until it shows the lowest height which is 75cm.
Memory Function
To use the memory positions, set the desk to the desired height press “S,” AND THEN PRESS 1, 2, 3 OR 4. The correct height will then be stored to the corresponding number.
Lock & Unlock Operation
Lock: hold touch“S”+“2” for 5s,indicator show “LOC”, this means system has
been locked , cannot do any operation.
Unlock: hold touch“S”+“2” for 5s,when indicator shows “LOC” change to normal
figure ,this means system is unlocked.
“HOT” – Overheat
If indicator show HOT, it means system is overheat or continuously work over 2 minutes. It should wait 18mins for rest until the digital shows the height figure.
Height limit
Keep pressing “﹀”+“︿” for 5 seconds, it can set the height limit position.
It can be canceled with same method.
Reminder time to stand and sit!
Keep pressing “S+1” for 5 seconds and it shows “0.0h,” press “up” button to change the time, press one time is 0.5h (30 minutes), press twice is 1.0h (60 minutes), when the time is over, it will appear a beep tone.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>