SEACHOICE 19483 Aeration Pump System Owner’s Manual
- September 28, 2024
- SEACHOICE
Table of Contents
SEACHOICE 19483 Aeration Pump System
INSTALLATION
-
Clean surface of sand, grease, etc and press pump suction cups firmly in place.
-
Spray tube may be removed and shortened if necessary.
-
If battery is close enough, clip wires to the battery with the battery clips provided. If additional lengths of wire are needed, use 18 gauge wire. On installation over 20 feet, use 14 gauge wire. Make sure all wire connections are completely waterp12roof, and out the water.
-
The black lead is negative(-), attach the black lead to the negative(-) side of the battery. The brown lead to the positive (+) side of the battery. Install a 2.0 amp fuse in the positive (+) lead as close to the battery as possible.
Dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>