Changing touch F10-1 Smart Display Screen User Manual
- September 28, 2024
- Changing touch
Table of Contents
F10-1 Smart Display Screen
“`html
Specifications
- Model: F10S
- Appearance: Black Plastic
- Screen size: 10.1 inch
- Resolution: 1280*800P
- Color Gamut: 60% NTSC
- Brightness: 240CD/M2
- Speaker: 4/2W
- Touch: Support (10 finger)
- Active Stylus: Support MPP
- Battery capacity: 3.8V/4000mAh
- FCC ID: 2BKBA-Frame
Product Usage Instructions
Main Interface
In the main interface, you will find the most used features. To
access the menu, simply tap once on the screen.
Function Introduction
Setting: Clock, Alarm, Timer, Stopwatch,
Bedtime
Display: Click to enter the time control
selection. You can set the time range of day mode and night mode,
and adjust the brightness of each mode.
Google Assistant
Control your frame via voice assistant by using Google
Assistant.
Package List
- Smart Display Stand
- USB to Type-C (For power supply)
- User Manual
- Adapter
FAQ
Questions
Startup & Shutdown
Frame can’t boot: Hold down the power button
for several seconds. If still unable to boot after charging, please
contact us.
Extinguishing screen Undercharge
Solutions:
- Check if the battery is fully charged.
- Check the power adapter before restarting the frame.
- Reduce brightness appropriately.
- Reduce the volume appropriately.
Active Stylus Support Home button lost
Solution: Please try rotating the frame to
show.
“`
USER MANUAL
F10S Smart Display
Introduction
10.1″
Smart Display
Speaker
VESA holes
Wall Hole Power Button Stand Hole
DC USB Micro SD Slot
Headset Jack Type-C For power supply
Introduction
Main Interface
In the main interface you will find the most used features. To access the
menu,simply tap once on the screen.
PHOTO HOMEHUB
CLAENDAR SPOTIFY INS
STORE
APPS
SETING FRAME
Return key
Return to previous step
Home button
Return to main interface
Volume +
Turn up the volume
Volume –
Turn down the volume
The first time you start our product, please connect it to your wifi network and log in your google account
Home button
click here to unfold the function keys
Google Assistant
Control your frame via voice assistant
Function Introduction
Setting
Clock
Alarm,Clock,Timer,Stopwatch,Bedtime
Display
Click to enter the time control
selection you can set the time range of daymode
and nightmode, and adjust the brightness of each mode.
DayMode
8.00
18.00
NightMode
18.00
6.00
For more product function explanations, please scan the QR code Email:
help@changingtouch.com
https://store.changingtouch.com/
Package List
Smart Display Stand
USB to Type-C (For power supply)
User Manual
Adapter
FAQ
Questions Startup&Shutdown
Frame can’t boot
Extinguishing screen Undercharge
Active Stylus Support Home button lost
Answers
Hold down the power button for several seconds.
1. Check if the battery is fully charged. 2. Check the power adapter before
restarting the frame again. 3. It is recommended to connect the adapter when
using, and the battery is only used for
short time entertainment. 4. If it is still unable to boot after
charging,please contact us.
The frame screen is always on by default. Please press the power button if you
want to turn off the screen.
1. Reduce brightness appropriately. 2. Reduce the volume appropriately.
The frame supports MPP and USI protocol active stylus, but due to the
different manufacturers of active stylus, the drawing effect will be
different, and the actual effect shall prevail.
Please try rotating the frame to show.
Specifications
Model Appearance Screen size Resolution Color Gamut Brightness
Speaker Touch
Active Stylus Battery capacity
F10S Black Plastic 10.1 inch 1280*800P 60%NTSC 240CD/M2 4/2W Support (10 finger) Support MPP 3.8V/4000mAh
FCC ID : 2BKBA-Frame
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: — Reorient or relocate the receiving antenna. — Increase
the separation between the equipment and receiver. — Connect the equipment
into an outlet on a circuit different from that to which the receiver is
connected. — Consult the dealer or an experienced radio/TV technician for
help.
FCC Radiation Exposure Statement The device has been evaluated to meet general
RF exposure requirement. The device can be used in portable exposure condition
without restriction
FCC Radiation Exposure Statement This equipment must be installed and operated
in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure