tp-link DS1 Series Wall Mountable Switches User Guide
- September 30, 2024
- tp-link
Table of Contents
DS1 Series Wall Mountable Switches
“`html
Product Specifications:
-
Model: DS110GMP2C
-
Screw Standard: ANSI B1.1
-
Minimum Length of Screw: 7 mm
-
Screw-Head-to-Wall Minimum Distance:
1.5mm -
Wall-Mounting-Holes Distance: mm
Product Usage Instructions:
Wall Mounting Guide
1. Wall Mounting Preparation
Before mounting the switch, you need to prepare the following
tools:
- A screwdriver
- Two screws that comply with the corresponding standard
2. Wall Mounting Procedure
Follow these steps to mount the switch on the wall:
-
Determine the location on the wall where you want to mount the
switch. -
Mark the wall where the two mounting holes are. The distance
between the marks must match the distance between the two mounting
holes of the switch. -
Drive the screws into the wall at the marked locations using
the screwdriver. -
Mount the switch on the wall ensuring it is upright and
positioned correctly.
3. Wall Mounting Specification
Refer to the specific model for detailed wall mounting
specifications.
Frequently Asked Questions (FAQ):
Q: Can I mount the switch sideways instead of upright?
A: For TL-SF1008P/TL-SF1008LP/TL-SF1009P/TL-SG1008P models, the
switch should be mounted with the ports facing downward and the
LEDs facing upward to ensure proper functionality.
Q: What is the minimum screw length required for wall
mounting?
A: The minimum length of the screw needed for wall mounting is 7
mm as per the product specifications.
“`
Wall Mounting Guide
Wall Mountable Switches
© 2023 TP-Link 1910013579 REV1.0.0
1.1 Wall Mounting Preparation
Before mounting the switch, you need to prepare the tools below: A screw
driver. Two screws which complies to the corresponding standard. For details,
see Wall Mounting Specification.
1.2 Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive
two screws into the wall, then mount the switch on the wall. Note that the
switch should be mounted on the wall upright rather than sideways. For TL-
SF1008P/TL-SF1008LP/TL-SF1009P/ TL-SG1008P, the switch should be mounted with
the ports facing downward and the LEDs facing upward.
- Determine the location on the wall where you want to mount the switch.
- Mark the wall where the two mounting holes are. The distance between the two marks must be the same as that between the two mounting holes of the switch. For the wallmounting-holes distance, see Wall Mounting Specification.
- Drive the screws into the wall at the marks using the screw driver. For the ScrewHead-to-Wall Minimum Distance, see Wall Mounting Specification.
- Mount the switch on the wall.
1.3 Wall Mounting Specification
Model DS110GMP2C
Screw Standard of ANSI B1.1
Minimum Length of Screw
Screw-Head-to-Wall Minimum Distance
Wall-Mounting-Holes Distance
7 mm
1.5mm
mm
4#, (5#), 6#
1.5mm
mm
4#, (5#), 6#
1.5mm
mm
4#, (5#), 6#
.5mm
1.5mm 1.5mm
mm mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
94mm
4#, (5#), 6#, 8#
.5mm
1.5mm
4#, (5#), 6#
.5mm
1.5mm
1 mm
4#, (5#), 6#
.5mm
1.5mm
1 mm
8.5mm
1.5mm
mm
4#, (5#), 6#
8.5mm
1.5mm
mm
4#, (5#), 6#
8.5mm
1.5mm
mm
Model
DS111P DS116GE ES205G ES205GP ES210GMP Festa FS308G Festa FS308GP Festa
FS310GP LS1005G LS1008G LS105G LS105GP LS105LP LS106LP LS108G LS108GP LS109P
LS1210GP S4500-16GP S4500-8G S4500-8GP S4500-8GP2F SG2008 SG2008P SG2016P
SG2210P SG2210XMP-M2 T1500G-8T TL-RP108GE TL-SF1005LP TL-SF1005P
Screw Standard of ANSI B1.1
Minimum Length of Screw
Screw-Head-to-Wall Minimum Distance
Wall-Mounting-Holes Distance
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
200mm
4#, (5#), 6#
11mm
4.5mm
52mm
4#
10mm
4.5mm
39mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
2.5mm
38mm
4#, (5#), 6#
8.5mm
2.5mm
48mm
4#, (5#), 6#
7.5mm
1.5mm
76mm
4#, (5#), 6#
7.5mm
1.5mm
65mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
39mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
94mm
4#, (5#), 6#
7.5mm
1.5mm
65mm
4#, (5#), 6#
7.5mm
1.5mm
65mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
105mm
4#, (5#), 6#
7.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
200mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
200mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
65mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
39mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
39mm
Model
TL-SF1006P TL-SF1008LP TL-SF1008P TL-SF1009P TL-SF1016D TL-SG1005D TL-SG1005LP
TL-SG1005P TL-SG1005P-PD TL-SG1006PP TL-SG1008D TL-SG1008P TL-SG105 TL-SG105E
TL-SG105-M2 TL-SG105MPE TL-SG105PE TL-SG105PP-M2 TL-SG105S TL-SG105S-M2 TL-
SG108 TL-SG108E TL-SG108-M2 TL-SG108PE TL-SG108S TL-SG108S-M2 TL-SG116 TL-
SG116E TL-SG116P TL-SG1210MP TL-SG1210MPE
Screw Standard of ANSI B1.1
Minimum Length of Screw
Screw-Head-to-Wall Minimum Distance
Wall-Mounting-Holes Distance
4#, (5#), 6#, 8#
8.5mm
1.5mm
94mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
105mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
105mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
105mm
4#, (5#), 6#
9mm
3mm
157.2mm
4#
10mm
4.5mm
60mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
39mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
39mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
94mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
94mm
4#
10mm
4mm
100mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
105mm
4#, (5#), 6#, 8#
7.5mm
1.5mm
39mm
4#, (5#), 6#
7.5mm
1.5mm
52mm
4#, (5#), 6#
7.5mm
1.5mm
150mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
39mm
4#, (5#), 6#, 8#
7.5mm
1.5mm
39mm
4#, (5#), 6#
7.5mm
1.5mm
150mm
4#, (5#), 6#, 8#
7.5mm
1.5mm
39mm
4#, (5#), 6#
7.5mm
1.5mm
52mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
94mm
4#, (5#), 6#
7.5mm
1.5mm
110mm
4#, (5#), 6#
7.5mm
1.5mm
150mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
94mm
4#, (5#), 6#, 8#
7.5mm
1.5mm
94mm
4#, (5#), 6#
7.5mm
1.5mm
110mm
4#, (5#), 6#
8.5mm
1.5mm
200mm
4#, (5#), 6#
8.5mm
1.5mm
200mm
4#, (5#), 6#
8.5mm
1.5mm
200mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
Model
TL-SG1210P TL-SG1210PP TL-SG2008 TL-SG2008P TL-SG2016P TL-SG2210P TL-SG605 TL-
SG605E TL-SG605P TL-SG608 TL-SG608E TL-SG608P TL-SL1311MP TL-SL1311P TL-SX105
Screw Standard of ANSI B1.1
Minimum Length of Screw
Screw-Head-to-Wall Minimum Distance
Wall-Mounting-Holes Distance
4#, (5#), 6#
7.5mm
1.5mm
150mm
4#, (5#), 6#
7.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
200mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#, 8#
7.5mm
1.5mm
39mm
4#, (5#), 6#
7.5mm
1.5mm
52mm
4#, (5#), 6#, 8#
7.5mm
1.5mm
39mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
94mm
4#, (5#), 6#
7.5mm
1.5mm
110mm
4#, (5#), 6#, 8#
8.5mm
1.5mm
105mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
8.5mm
1.5mm
150mm
4#, (5#), 6#
7.5mm
1.5mm
150mm