AIDIBAO T500 Intelligent Tennis Ball Machine Instruction Manual

AIDIBAO T500 Intelligent Tennis Ball Machine

The final interpretation of the manual belongs to our company. Please read it carefully before using this product.

Schematic Diagram of Intelligent Tennis Serving Machine TS00

Packing List

Installation Instructions

Unpacking and inspection
Open the package, check all parts according to the packing list to ensure that there is no damage, and take out the tennis serving machine and its supporting ball frame.

Install the ball mounting frame
Align the small opening end of the mounting frame with and against the top of the tennis serving machine. Make sure that the mounting frame is firmly mounted on the serving machine so that the ball can be fed smoothly.

Set the ball paddle:
Locate the “door” shaped paddle on top of the tennis serving machine. Lift it toward the middle into place.

Position the serving machine and start:
Place the tennis serving machine where you want to use it, making sure the equipment is secure and there is enough space around it to operate. Press the power switch to power on the serving machine

Download and install the operating application

1. Scan QR Code below or on the machine body to download and install the Aidibao Smart Serving Machine Operation Application

Brief description of operating procedures

1. Place the assembled smart serving machine at a suitable position on the court (refer to the APP to operate the position of the ball path)
2. The intelligent tennis serving machine is powered on. When the power indicator on the serving machine is on, the serving wheel will turn left and right for power-on self-test.
3. Enter the ADIBO smart serving machine application, click the stand-alone version, select the smart tennis serving machine, select the serving machine code above the confirmation, and click the confirmation. After the machine is turned on, the power, network and working indicator lights of the serving machine will be on at the same time.
4. Enter the “Operation” column in the ADI BO Smart Serving Machine application.
5. Preset training: There are various tennis training paths, such as fixed-point training, combination training, random training, star challenge, senior high school entrance examination training, etc. Select the corresponding training path according to your own training needs, and click Start.
6. Customization: The graphical interface shows the tennis court opposite to the intelligent tennis serving machine. Select the machine and place it on the baseline or mid line. Press and hold for2 seconds on the schematic diagram of the required landing point to select. After selection, click below to start.
7. The adjustment diagram of custom ball path parameters is shown below.
8. Explanation of parameter adjustment button:
9. My Ball Path: After selecting the training ball path, click Save to save the current ball path as a training archive. In the future, you can directly click Start in “My Ball Path” to train quickly.

Troubleshooting

Frequently Asked Questions

1. Do not touch the rotating part when the serving machine is working;
2. When the serving machine pauses and adjusts its functions, do not contact the ball outlet at a close distance, and remind the people in the front court to pay attention to safety before starting the machine;
3. Minors must operate and use under the guidance of Adu Its;
4. Avoid rain and snow during outdoor use:
5. When the serving machine is working, in case of abnormal phenomena such as a peculiar smell or smoke, please immediately press the emergency switch and turn off the power source;
6. After use, finish the training in the mobile phone APP-training and then turn off the power.

Warranty Card

Dear Customer, Greetings! Thank you for purchasing ADIBO brand products. Please be sure to carefully read the product manual before use to ensure proper operation. In case of malfunction, please first refer to the [Troubleshooting] section in the product manual. If the issue cannot be resolved through troubleshooting, please contact our after-sales department as soon as possible for quality service. You are welcome to call our service hotline at 4000-009-773 for inquiries.

Warranty Terms

1. Warranty Period : The warranty period for the ADIBO Smart Serving Machine Model T500 is one year, and three months for consumable parts such as the serving wheel and shuttlecock bucket.
2. Covered Repairs: During the warranty period, any malfunctions that occur under normal usage conditions as per the user manual (as determined by our official staff) will be repaired free of charge.
3. Exclusions: During the warranty period, repairs will be charged in the following situations:
   • Inability to provide this warranty certificate and valid purchase proof.
   • Malfunctions and damages caused by incorrect usage or improper self-repair.
   • Malfunctions or damages caused by transport, moving or dropping after purchase.
   • Malfunctions and damages caused by unavoidable external factors.
   • Damages caused by water ingress or other solutions due to improper use.
   • Damages are caused by using unspecified power sources or voltages.
4. Limitation of Liability: This warranty is the only express or implied warranty provided (including implied warranties of merchantability, suitability for a particular purpose, and fitness for application), and regardless of contract, negligence, or otherwise, our company is not responsible for any special, incidental, or consequential damages.
5. Return Shipping: Please package the product properly for repair and transportation. Our company is not liable for any damage during transit.

Best regards, ADIBO Customer Service Team

Product Warranty Card

• Product Name
• Serving Machine Model
• Customer Name
• Customer Address
• Date of Purchase
• Contact Phone Number

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Address: 3rd Floor, Building 2, Hui Sheng Da Industrial Park, Qinghu Community,Longhua Street, Longhua District, Shenzhen City Web: www.adibo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>