KC HiLiTES Flex Quad LED Lights Instruction Manual
- June 3, 2024
- KC HiLiTES
Table of Contents
KC HiLiTES Flex Quad LED Lights
INSTALLATION INSTRUCTIONS
IMPORTANT
Please read all instructions before beginning installation. These guidelines
are provided in good faith to help prevent any issues arising from errors
during installation. The manufacturer of this product shall not be held
responsible for any user actions taken or not taken during installation. There
are many details of the installation that are assumed to be general mechanical
knowledge to experienced installers; which are not detailed in these
instructions. These installation guidelines are intended to serve as
professional recommendations and are not as a step-by-step, fail-safe
installation checklist. The selection of an experienced installer is the sole
responsibility of the project owner.
STEP BY STEP INSTALLATION INSTRUCTIONS
IT IS HIGHLY RECOMMENDED THAT ALL SERVICING OF LED MODULES OCCUR OFF THE
VEHICLE AND ON A CLEAN, FLAT SURFACE.
TRIM INSTALLATION
- Begin by using a 2.5 Hex/Allen Key to remove the M4 Flat Socket Cap Screws.
- Remove BEZEL & TRIM from the assembly ONLY, leaving the LENS & O-RING in place.
- Replace the TRIM by seating it atop of the LENS.
- Replace the BEZEL over the TRIM.
- Remove and Re-apply (Blue) Lock-Tite onto the screws.
- Hand-tighten the M4 Flat Socket Cap Screw, evenly distributing the pressure.
- Torque the Screws to 6.5lbf.in (7.5kgf.cm)
LENS + O-RING INSTALLATION
- Begin by using a 2.5 Hex/Allen Key to remove the M4 Flat Socket Cap Screws.
- Remove BEZEL, TRIM, LENS + O-RING from the assembly. Place the‘ new’ O-RING in side the O-Ring Groove in Housing. Place LENS atop the O-RING with the
- correct logo positioning. Replace the TRIM with the LENS.
- Replace the BEZEL with the TRIM.
- Remove and Re-apply (Blue) Lock-Tite onto the screws. Hand-tighten the M4 Flat Socket Cap Screw, evenly distributing the pressure.
- Torque the Screws to 6.5lbf.in (7.5kgf.cm)
Copyright 2020 KC HiLiTES, Inc. Rev:05192020 – KC3265COA REV 1