SUPPLYED BFCT-X15 Transmitter Owner’s Manual
- September 28, 2024
- SUPPLYED
Table of Contents
BFCT-X15 Transmitter
“`html
Specifications:
- Product: Transmitter
- Battery Capacity: 200 mAh
- Voltage: DC 2.4 V – 5.0 V
- Control Distance: 150 ft
- Transmission Current: 5.5 mA
- Frequency: 2.4 GHz / 433.92 MHz
- FCC Certified
Product Information:
The Transmitter BFCT-X15 is a remote control device designed for
controlling various functions. It features a USB-C charging port
for convenient recharging and comes with a Helios Remote, Wall
Bracket, Screws, and Anchors for easy installation.
Product Usage Instructions:
1. Charging:
Before initial use, ensure the transmitter is fully charged via
the USB-C charging port.
2. Powering On/Off:
To power on the transmitter, press and hold the C CONFIRM
button. To power off, press and hold the STOP button.
3. Channel Selection:
Use the CHANNEL + and DIAL buttons to navigate through different
channels.
4. Function Control:
Utilize the various buttons like UP/CLOSE, DOWN/OPEN, L LIMIT
for controlling different functions as needed.
5. Control Distance:
Ensure you are within the specified control distance of 150 ft
for optimal performance.
FAQ:
Q: How do I reset the transmitter?
A: To reset the transmitter, press and hold the C CONFIRM button
and the STOP button simultaneously for 10 seconds.
Q: Can I use the transmitter with multiple devices?
A: Yes, the transmitter can be paired with multiple compatible
devices for versatile control options.
“`
DISPLAY CHANNEL –
DIAL UP/CLOSE
Transmitter BFCT-X15
FRONT
BACK
CHANNEL +
DOWN/OPEN
STOP
C CONFIRM
L LIMIT
USB-C CHARGING PORT
INCLUDES
Helios Remote Wall Bracket Screws Anchors
2x
2x
REMOTE PARAMETERS
Product: Transmitter Battery Capacity: 200 mAh Voltage: DC2.4 V ~ 5.0 V
Control Distance: 150 ft Transmission Current: 5.5 mA Frequency: 2.4 GHz /
433.92MHz
PRODUCT FUNCTIONS · 15 total channels – 1 group – 14 individual. · Zebra /
Shangri-La (Tilt) light adjustment with dial. · Curtain – button control and
dimming with dial control. · 150 ft range. · Press or to select a channel from
1-14 to operate or pair a motor. Channel ALL controls all programmed channels.
· Press or to open or close motor. · Rotate DIAL for dimming.
FCC certified
1
FCC Statement Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: – Reorient or relocate
the receiving antenna. – Increase the separation between the equipment and
receiver. – Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. – Consult the dealer or an
experienced radio/TV technician for help. This device complies with part 15 of
the FCC rules. Operation is subject to the following two conditions (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
FCC certified
2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>