Bonai PB32-2MC Solar Power Bank User Manual
- June 15, 2024
- Bonai
Table of Contents
Bonai PB32-2MC Solar Power Bank
Product Information
Technical Specifications
- Capacity: 30000mAh
- Total Output: 5V/5.4A
- Weight: 570g/20.11oz
- Input: 5V/2A (Use 2 together, 4A max.)
- Output: 5V/3.0A or 5V/2.4A
- Size: 6.9 x 3.3 x 1 inches (L x W x H)
Product Usage Instructions
1. How to Charge the Power Bank
- Connect the Micro charging cable, USB end to a wall outlet (a) or the USB port of a laptop (b), the Micro end to the power bank.
- The LED indicator shows the charging status by blinking. Once fully charged, all 4 lights will be on.
- Note: You can use 2 charging cables together to accelerate the speed of charging.
(a) – Wall Outlet
(b) – USB Port of a Laptop
2. How does the LED Indicator work
| LED Indicator | Description | Battery Capacity |
|---|---|---|
| 1st light blinking | The power bank is charging. | 0-25% |
| 2nd light blinking | The power bank is charging. | 26-50% |
| 3rd light blinking | The power bank is charging. | 51-75% |
| 4th light blinking | The power bank is charging. | 76-100% |
| All 4 lights on | The power bank is fully charged. | 100% |
Frequently Asked Questions (FAQ)
Q: How long does it take to fully charge the power bank?
A: The charging time may vary depending on the power source and the current battery level of the power bank. On average, it takes approximately X hours to fully charge the power bank.
Q: Can I charge multiple devices simultaneously?
A: Yes, you can charge multiple devices simultaneously using the USB outputs of the power bank. Make sure to use compatible charging cables for each device.
What’s in the Box
- Bonai PB32-2MC-Solar Power Bank
- 2 Micro Charging Cable
- User Manual
Technical Specifications
| Capacity: 30000mAh | Input: 5V/2A (Use 2 together, 4A max.) |
|---|---|
| Total Output: 5V/5.4A | Output: 5V/3.0A or 5V/2.4A |
| Weight: 570g/20.11oz | Size: 6.9 x 3.3 x 1 inches (L x W x H) |
How to Charge the Power Bank
- Connect the Micro charging cable, USB end to a wall outlet(a) or the USB port of a laptop(b), the Micro end to the power bank.
- LED indicator shows the charging status by blinking. Once fully charged, 4 lights are on.
Note: You can use 2 charging cables together to accerate the speed
.
How does the LED Indicator work
How to Charge Other Devices
- iPhone/iPad/iPod Charging: We are attaching 2 Micro cables for power bank recharging. If you are using iPhone, you can charge them by using your own Lightning cable or USB C to Lightning cable. USB end plug into the power bank and the lightning end to an iPhone/iPad/iPod.
- Android Smartphone：Use your the attached micro cable or your own USB Type c charging cable, and connect both the power bank and the cellphone.
- No need to press the power button, once connected, charging starts.
Charging Process
How to Use the Flashlight
- Press the switch button twice continuously to turn ON/OFF the flashlight.
Instructions
- Press the switch button once, and the LED light will turn on, which shows how much battery remains.
- The LED light won’t light up when the battery has been exhausted.
- If the power bank has not been used for a long time and can not be activated, please use a 5V/1A power adapter to charge it until the LED light can be turn on.
Note
- To avoid damage, please don’t deliberately drop, smash, press hard or restructure the power bank.
- Store it in a dry and clean place if not in use and make sure it is charged.
- To avoid explode, please do not leave it in the dash board and under the blazing sun for a long time.
Warranty
Bonai provides costomers with a 12-month warranty from the original date of
purchase.
Contact us
For any problems or inquires concerning Bonai power bank, please send an
e-mail to [email protected]. We will
answer you in 24H and try our best to solve the problems for you.
Statements
We are only responsible for the power banks that are purchased from Bonai, and
any unauthorized resell of Bonai’s products are prohibited and they are
selling fake products.