U-PROX V2 Wireless Outdoor Motion Detector User Manual

: June 17, 2024
: U-PROX

Table of Contents

U-PROX V2 Wireless Outdoor Motion Detector
Product Usage Instructions
TECHNICAL SPECIFICATIONS
WARRANTY
REGISTRATION
RANGE TEST FOR OPTIMAL INSTALLATION LOCATION
INDICATION IN RANGE TEST MODE
DEVICE PLACEMENT
INSTALLATION
ANTI-MASKING CALIBRATION
ANTI-MAKING
BATTERY REPLACEMENT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

U-PROX V2 Wireless Outdoor Motion Detector

Technical Specifications

Working distances: 3 to 15 m
Angle detection: PIR target detection speed 0.2 to 5 m/s
Optical noise immunity: > 6500 Lux
Mounting heights: 0.9 to 1.10 m
Pet immunity: weight up to 20 kg
Power: 3V, two CR123A lithium battery included
Service life of battery: up to 5 years
Radio frequency: ISM-band wireless interface with several channels
Communication: ITU region 1 (EU, UA): 868.0 to 868.6 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight) ITU region 3 (AU): 916.5 to 917 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
Permissible humidity: up to 95%
Environmental class: III (according to EN 50131)
Dimensions: with a hood – 183.8 x 77.2 x 88.6 mm, no hood – 180 x 70 x 62.5 mm
Weight: 290 grams
Case color: white
Protection class: IP55

Product Usage Instructions

Facility

Choose a suitable mounting location within the specified working distances and mounting heights.
Mount the device using the provided mounting kit and follow the installation guidelines in the quick start guide.

Battery Installation

Open the device hood to access the battery compartment.
Insert the two CR123A lithium batteries provided into the compartment, ensuring correct polarity.
Close the device hood securely.

Configuration

Download and install the U-Prox Installer mobile application on your smartphone.
Follow the app instructions to connect the device to the U-Prox control panel.

Use
The device will detect motion within its range and send alarm notifications to the control panel. Monitor the device status using the light indicator and adjust motion detection range if needed.

Frequently Asked Questions (FAQ)

Q: How long is the warranty for the U-Prox devices?
A: The warranty for U-Prox devices (except batteries) is valid for two years from the purchase date.

Q: What should I do if my device operates incorrectly?
A: If your device is not functioning correctly, please contact [email protected] for assistance. Remote solutions may be available.

WIRELESS OUTDOOR MOTION DETECTOR
Is a part of the U-Prox security alarm system

User manual
Manufacturer: Integrated Technical Vision Ltd.
Vasyl Lypkivsky str. 1, 03035, Kyiv, Ukraine

U-Prox PIR Outdoor V2 – is a wireless oudoor motion detector with advanced detections algorithms, digital temperature compensation of sensor and extended antimasking svstem.

When the thermal balance of the environment changes, the device processes a digital signal from two PIR sensors, filters noise and interference and sends an alarm notification to the U-Prox control panel.

The device is connected to the control panel and is configured with the U-Prox Installer mobile application.

Functional parts of the device (see picture)

Device hood
Device case
Light indicator of the operation modes
Anti-masking diffuser #1
Fresnel lens
Anti-masking LED
Anti-masking diffuser #2
Fresnel lens
Bracket for mounting
Bracket connector
Fixing screw
Tamper switch plate
Back of the device
Power button
Motion detection range adjuster

TECHNICAL SPECIFICATIONS

$U-PROX-V2-Wireless-Outdoor-Motion-Detector-Fig- $16$$

COMPLETE SET

U-Prox PIR Outdoor V2;
Two CR123A batteries (pre-installed);
Device hood; 4. Mounting kit; 5. Quick start guide
CAUTION. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS

WARRANTY

Warranty for U-Prox devices (except batteries) is valid for two years after the purchase date.
If the device operates incorrectly, please contact [email protected] at first, maybe it can be solved remotely.