GEOID CC600 Smart GPS Bike Computer User Manual
- September 27, 2024
- GEOID
Table of Contents
GEOID CC600 Smart GPS Bike Computer
Button Functionality
Unit State | A Key | B Key | C Key |
---|---|---|---|
Powered off | Long press: Power on the device | ||
Ready State | Long press: Power off the device | Short press: Next page | |
Long press: Goto Settings | Short press: Start ride | ||
Ride in progress | Short press: Lap counting Long press:Turn off the screen |
Short press: Next page
Long press: Goto Menu| Short press: Pause ride Long press End ride
Ride Paused| Long press Turn off the screen| Short press: Next page
Long press: Goto Menu| Short press: Continue ride
Long press: End ride
Menu or Settings| Long press: Power off the device(Settings) Turn off the
screen(Menu)| Short press: Left Side Function| Short press Right Side Function
Specifications
Product Model | CC600 |
---|---|
Battery Type/Capacity | Lithium Battery/1800mAh |
Charging Input Specification | DC5V,1A |
Wireless Transmission Protocol | ANT+, Bluetooth, Wi-Fi(2.4G) |
Transmission Frequency | 2400MHz to 2480MHz |
Transmission Power | 10mW |
Operating Temperature | -10°C to 50°C |
Charging Temperature | 0°c to 45°C |
Net Weight | 74g |
What’s inside
- Bike Computer*l
- Type-C Charging Cable*l
- Lanyard*l
- Bike Computer Mount*l
- Replacement base of bike computer rack*l
- RubberBand*4
Installation
-
Step 1: Place the mount on the handlebar.
-
Step 2: Secure the mount with the rubber band.
-
Step 3: Install the computer following the direction indicated by the arrow and rotate the bike computer.
-
Step 4: Installation completed.
Instructions
Charging
Open the rubber cover at the bottom of the device and insert the charging
cable to connect it to a power supply for charging.
Note: If the device is not used for an extended period, please charge the
Bike Computer once every three months.
Configuration
- Scan to download”OnelapFit”and complete the login/registration.
- Turn on the bike computer and use the “OnelapFit” app to scan the QR code on the bike computer screen to connect and activate it.
- Follow the “OnelapFit” app guide to complete pairing and personal information configuration.
- After completing the above configuration, each time you finish cycling with the bike computer, the cycling data can be automatically uploaded to “OnelapFit” when the bike computer connects to Wi-Fi or is connected via Bluetooth to “OnelapFit”‘. You can view more detailed data analysis and statistics on the app.
•Regulatory related electronic label viewing path: Settings ➔ System ➔
Regulatory Information
Warning
Failure to pay attention to the following potential dangers may result in
serious injury or even fatal accidents.
Battery Warning:
This product uses a rechargeable lithium battery. Failure to comply with the
following guidelines may lead to a shortened battery lifespan, device damage,
fire, chemical burns, electrolyte leakage, and the risk of injuries.
- Do not dismantle, modify, puncture, squeeze, or damage the battery to avoid potential hazards.
- Do not expose the device and battery to flames, explosions, or other hazards.
- Do not place the device in high-temperature environments, such as inside a dryer or under direct sunlight in a car.
- Do not immerse the battery in water or any other liquids.
- Avoid frequent overcharging.
- Do not charge the battery in the vicinity of a heat source or under extremely hot conditions.
- Charge the battery strictly following the charging requirements to prevent potential dangers due to excessive current.
- If the product is not used for an extended period, charge the battery to full capacity before storage to extend the battery’s lifespan.
Warranty Terms
Repair, Replacement, and Return:
This product has undergone strict quality inspection. According to the
warranty card, if there are any product quality issues caused by normal use
within the warranty period, we provide free warranty service within 7 days
from the date of purchase (inclusive). If there is any problem with the
product itself, it can be unconditionally returned. The product warranty
period is 1 year from the activation time. For non-activated products, the
warranty period is based on the purchase date. If no purchase date is
available, the warranty period is based on the factory date.
Product warranty return requires the use of specified logistics transport;
otherwise, the user will bear the freight or transport losses.
The following situations are not covered by the warranty:
- The warranty period has expired.
- Any damage caused by improper use, maintenance, and storage.
- Damage to the product caused by failure to use or install it in accordance with the instructions.
- Unauthorized repair, misuse, collision, negligence, abuse, fluid ingress, accidents.alterations, or unspecified use of accessories other than this product.
- The warranty has been altered without authorization.
- The user cannot provide a valid warranty and invoice.
- The product serial number or code stated on the warranty is inconsistent with that on the product.
- Failures and damages caused by other non-product design, manufacture, and quality problems.
- Damage caused by wear or dirt due to normal use, including human factors such as scratches, exposure to chemical reagents or sharp objects, falling, or pressure
- Any damage caused by force majeure.
After-sales service period:
Our company provides lifetime after-sales service for our products. After the
product exceeds the warranty period, only the cost is charged when the product
fails to be repaired, and only the cost of labor and parts is charged when the
product is repaired due to man-made damage. In case of man-made damage, only
the cost of labor and parts will be charged.
The company reserves the right to modify and interpret the above contents.
Fcc Statements
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(l)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and. if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- insult the dealer or an experienced radio/TV technician for help ,
RF Warning:
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with Minimum distance 20cm between the radiator and your body.
CE Declaration of Conformity
Hereby, Qingdao Geoid Intelligence Technology Co., Ltd. declares that this product is in compliance with the Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://geoidsports.com/pages/Certificate
Recycling/Licenses
WEEE(Waste Electronic Electric Equipment) European Directive 2012/19/EU
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
Batteries
In accordance with the Battery Directive, used batteries should not be
disposed of in the domestic waste. Dispose your batteries in the collection
containers specific for this purpose in retail stores.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>