NODOR 60819890 Digital Cooker Hood User Guide

NODOR 60819890 Digital Cooker Hood

Product Information

Product Specifications

• Model: 60819890
• Manufacturer: MULTIKOMPLEX BUDAPEST KFT.
• Website: www.multikomplex.hu

Product Usage Instructions

Power On/Off and Settings Adjustment:

To change settings or turn the product on/off:

1. If available, press the Light Icon to change settings. The icon may flash red.
2. To adjust the Movement Sensor:
   • Within 30 seconds of powering on, press the Timer and Light Icons simultaneously for 2 seconds.
   • Repeat the process to modify the sensor setting. The LED display will indicate the selected mode.
   • If the sensor is enabled, the display will flash for 5 seconds as default. If disabled, it will remain solid for 5 seconds.

Cooker Hood Operation:

To switch on the cooker hood using the Movement Sensor:

1. Pass your hand in front of the sensor to activate it.
2. Note that you cannot turn off the cooker hood with the sensor; you must touch the Hood On/Off Icon instead.

IMPORTANT:  Please read carefully the separate safety guide before use.

WARNING: Read the instructions before using the appliance.

FUNCTIONS & SETTINGS

Control panel

To obtain the best results from your cooker hood it is recommended that you leave it switched on for a short time after you have finished cooking.

To Set Up For First Time Use

• Once you have turned on the appliance at the switched fused connection unit, all the icons will start to blink white. The hood is now in settings mode.
• If you do not want to set up the hood at this stage it can be turned off by pressing the Hood On/Off Icon or alternatively, it will switch off automatically after 30 seconds.

IMPORTANT: Once in settings mode, you can adjust the recirculation, lighting or sensor options in any order. However, all actions must be completed within two minutes.

Setting the Ducted or Recirculation mode

• Turn off the power first and within 30 seconds of turning on the mains power again, press the Timer Icon and the Timer Icon will turn red. The LED display will show the current Ducted or Recirculation mode.
• Ducted mode the default setting to extract air to the outside.
• Recirculation mode the setting to recirculate the air with carbon filters installed.
• To change this option press either or to select the correct mode and then press
• Timer Icon to accept the change.

Setting the Lighting mode

• Within 30 seconds of turning on the mains power, press the Light Icon . and the Light Icon will turn red. The LED display will show the current lighting mode.
• Ambient light enabled Default setting, all lights are enabled. (Only if it’s provided)
• Ambient light disabled A. Optional, down lights only are enabled. (Only if it’s provided)
• Cool light L.- Default setting for all lights.
• Warm light Optional setting for all lights.
• To change these settings press or and press the Light Icon to accept the change.

Setting the Movement Sensor This feature is not available on all models)

• Within 30 seconds of turning on the mains power, press the Timer and Light Icons together for 2 seconds to adjust the Movement Sensor. Repeat this process to alter the sensor setting if required. The LED display will show the selected mode.
• Sensor enabled the display will flash for 5 seconds – default setting.
• Sensor disabled the display will remain solid for 5 seconds.

Note: To change any of these settings at a later time, you must switch off the power at the mains outlet first. Wait a few seconds, turn on the power again and adjust as required.

GENERAL USE

On/Off

•  Touch the Hood On/Off Icon and the glass panel of the cooker hood will open. The fan will turn on at speed 1 and the light will come on at the last setting used. All icons will be white apart from the Light Icon which will be red if the light was already on.
• Press the On/Off Icon again to turn off the cooker hood; the glass panel will close and the fan will switch off. The light will also turn off automatically after 5 minutes. If you wish to leave the light on for an extended time, manually switch on at the control panel.

Movement Sensor (if enabled)

• You can switch on the cooker hood by passing your hand in front of the Movement Sensor. Note you cannot turn off the cooker hood using the Movement Sensor, you must touch the Hood On/Off Icon instead.

Light On/Off

• Touch the Light Icon to turn on the downlight and also the ambient light. (If it’s provided and enabled)
• To change the brightness of the downlight, touch and hold the Light Icon until the display shows the brightness sequence. Remove your finger from the Light Icon when the desired brightness is achieved. The sequence runs from L1 to L5 and back to L1 in steps. The selected brightness will flash for a few seconds and revert to the fan speed display.

Fan On/Off and Speed Reduction

• If the fan motor is set at speeds 2, 3, 4, 5 or P, pressing the Fan Decrease Icon v will reduce the speed by one level at a time. If you press the Fan Decrease Icon v for more than two seconds, the speed will drop to speed 1 from any other level.
• If the fan motor is set at speed 1, pressing the Fan Decrease Icon ****will result in the motor switching off. However the downlight will remain on (if enabled) and the display will show the current brightness level.

Boost Function and Speed Increase

• If the fan motor is set at speeds 1, 2, 3, 4 or 5, pressing the Fan Increase Icon ****will increase the speed by one level at a time.
• If you press the Fan Increase Icon ****for more than two seconds, the speed will increase to full power from any level and the display will flash ‘P’.

NOTE

• Full power or Boost (P) only operates for five minutes maximum to conserve energy and the fan speed will automatically drop to speed level 5 after this time.

Setting the Timer ****

• When the fan motor is on and the Timer Icon is pressed the icon will flash red and the display will show the current fan speed.
• The chosen speed level will remain in use for five minutes before dropping down to the next lowest speed. This speed will remain in operation for two minutes before dropping down again. This will be repeated every two minutes unless the speed is already at level 1 and then the fan will turn off. If the light is already on, this will also be turned off.
• Pressing the Fan Decrease Icon vor Fan Increase Icon ^ during a current timer program will restart the countdown process again with the first five minute cycle.
• If the Timer Icon is pressed again during a current timer program, the cycle will be cancelled. The Timer Icon will revert to white and the current fan speed will remain on indefinitely.
• The maximum timer program cycle is 15 minutes: 5 minutes on P and then 2 minutes each on speed 5 down to speed 1.

FAQS

Contacts

Importer:

• MULTIKOMPLEX BUDAPEST LTD.
• The range hood expert… since 1995 H-1211 Budapest Mansfeld Péter utca 27 (Former Bajáki Ferenc Street)
• phone: +(36-1) 427 0325, +(36-1) 427-0326;
• fax: +(36-1) 427 0327
• www.multikomplex.hu

CNA group

• CATA ELECTRODOMÉSTICOS, S.L.
• Offices: c/ Anabel Segura, 11, Building A, 3rd pl. 28108. Alcobendas. Madrid. Spanyolország
• Factory: c/ del Ter 2, Apdo. 9. 08570. Torello. Barcelona. Spanyolorszag
• T. +34 938 594 100 – Fax +34 938 594 101
• www.cnagroup.es – cna@cnagroup.es
• Customer Service: 902 410 450 / +34 938 521 818 – info@cnagroup.es
• SAT Central Portugal: +351 214 349 771 – service@junis.pt

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>