S13CWPK5CCTLSBZ Outdoor Commercial Wall Light

“`html

Product Information

Specifications:

• Model: S13CWPK5CCTLSBZ
• Type: Outdoor Commercial Wall Light
• Operation: Dusk to Dawn
• Manufacturer: Feit Electric
• Contact: 1-866-326-BULB (2852)

Product Usage Instructions:

Safety Information:

– Always turn off the power supply at the fuse or circuit
breaker box before installing the fixture.
– Ground the fixture to avoid electric shock and ensure reliable
starting.
– Double-check all connections to ensure they are tight and
correct.
– Wear rubber-soled shoes and work on a sturdy wooden ladder.
– Dispose of packing material properly to prevent hazards to
children.

Installation:

1. Remove the fixture and mounting package from the box.

2. Ensure all parts are present by referring to the installation
   instructions.

3. Consult a qualified electrician if unsure about wiring or local
   electrical codes.

4. Follow local and National Electrical Code (N.E.C.) standards
   for electrical connections.

Dusk to Dawn Operation:

– The light will automatically turn on at dusk and stay on until
dawn.
– Keep the wall switch in the ON position at all times for proper
function, including daytime.
– Use the sensor cover provided to bypass the sensor for continuous
light control via wall switch or master photocell.

FAQ:

Q: How can I ensure the dusk to dawn operation works

correctly?

A: Always keep the wall switch in the ON position, including
during the day, to ensure proper function.

Q: What should I do if I encounter missing parts or have

installation problems?

A: Contact Feit Electric Customer Service at 1-866-326-BULB
(2852) for assistance before returning the product.

Q: Why is it important to ground the fixture during

installation?

A: Grounding helps prevent electric shock and ensures the
fixture starts reliably.

“`

Model #S13CWPK5CCTLSBZ
USE AND CARE GUIDE
OUTDOOR COMMERCIAL WALL LIGHT
READ BEFORE INSTALLATION
SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store, call Feit Electric Customer Service 8 a.m. – 5 p.m., PST, Monday – Friday 1-866-326-BULB (2852) FEIT.COM THANK YOU
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this LED yard light fixture. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Feit Electric!

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Wiring for a Standard Wall Switch. . . . . . . . . . . . . . . . . . . . . . . . . . 7 Wiring for 0-10V Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Lumen/Color Select Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Safety Information

DUSK TO DAWN OPERATION:
The light will turn on at dusk and remain on through the night until dawn. The light will remain off throughout the day, until dusk.
NOTICE: To make sure this function works properly, always keep the wall switch in the “ON” position (including daytime).
NOTICE: A sensor cover (GG) is provided which can be used to block out light and bypass the sensor. This will keep the light continuous on and fixture can be controlled to turn on/off through the wall switch or a master photocell.

For your safety, always remember to:
Turn off the power supply at the fuse or circuit breaker box before you install the fixture.
Ground the fixture to avoid potential electric shock and to ensure reliable starting.
Double-check all connections to be sure they are tight and correct.
Wear rubber soled shoes and work on a sturdy wooden ladder.
Account for small parts and destroy packing material, as these may be hazardous to children.
This fixture is designed for use in a circuit protected by a fuse or circuit breaker. It is also designed to be installed in accordance with local electrical codes. If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code. Account for small parts and destroy packing material, as these may be hazardous to children.
NOTICE: All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

Product Specifications: · 120/277 VAC, 50/60Hz, 86W max · Dimmable with 0-10V dimmer only · Suitable for wet locations
WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly.
CAUTION: Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARNING: RISK OF CUTS. Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.

Supplier’s Declaration of Conformity: 47 CFR § 2.1077 Compliance Information Responsible Party: Feit Electric Company 4901 Gregg Road, Pico Rivera, CA 90660, USA 562-463-2852 Unique Identifier: S13CWPK5CCTLSBZ

FCC STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Care and Maintenance

Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner and soft cloth. When cleaning the fixture, make sure the power is turned off. Do not spray cleaner directly onto any part of the fixture or LEDs.

Limited Warranty

This product is warrantied to be free from defects in workmanship and materials for up to 5 years from date of purchase. If the product fails within the warranty period, please contact Feit Electric at info@feit.com, visit feit.com/contact-us or call 1-866-326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

2 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Pre-Installation
TOOLS REQUIRED (NOT INCLUDED)

Phillips

Drill

screwdriver

HARDWARE INCLUDED

1/4 in. Drill bit

NOTE: Hardware not shown to actual size.

AA

BB

CC

EE

FF

Part AA Wall Light BB Front Cover Screws CC Wall Mounting Screws DD J-Box Mounting Screws EE Plastic Anchors FF Wire Connectors GG Sensor Cover

GG Description

DD
Quantity 1 2 4 3 4 5 1

3 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Wall Mount Installation
1 Turning Off the Power
Turn the power OFF at the wall switch, fusebox or the circuit breaker.
2 Remove the Front Cover
Open the Wall Light (AA) by unscrewing the Front Cover Screws (BB) using a phillips screwdriver (not provided).
AA

4 Affix Back Plate to Wall
Using the Back Plate as a guide, mark the position on the wall where the Anchors will be placed.
Before marking the screw position, straighten with the integrated horizontal level.
EE Drill the marked holes
using a 1/4 in. drill bit, then insert Anchors (EE).

BB
Remove the Front Cover from the Back Plate by disconnecting the quick connect wires and sliding the Front Cover in an upward direction.

Level
Affix Back Plate to Anchors using Wall Mounting Screws (CC).
Observe horizontal level before tightening screw.
CC

Leve l

3 Prep the Back Plate
Drill 4 holes from the outside surface on the Back Plate using a 1/4 in. drill bit as indicated. Select the desired conduit location and remove the appropriate 1/2 inch plug (II).
II

5 Connect the Power Supply Wires
Feed the power supply wires through the desired conduit inlet on the Back Plate. Using Wire Connectors (FF), connect wires coming from the LED driver on the Back Plate to the power supply wires:
See wiring diagram A or diagram B on page 7.
NOTE: Purple and Pink wires to be used with 0-10V dimmers only (purple +10V, pink -10V).
Purple (+10V) – Purple from dimmer
Pink (-10V) – Pink from dimmer.
See wiring diagram B. FF

4 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Wall Mount Installation (continued)

6 Re-Attach the Front Cover
Re-attach the Front Cover to the Back Plate and re-connect the quick release wires.

7 Apply Sealent
Once the fixture is tightly secured to the wall, apply silicone sealant around the base of the fixture to prevent moisture from reaching the connections.

Close the Front Cover and secure with the Front Cover Screws (BB).
BB

8 Turn Power On
Turn power back on at the wall switch, circuit breaker or fusebox.

Flush J-Box Mount Installation

1 Turning Off the Power
Turn the power OFF at the wall switch, fusebox or the circuit breaker.

2 Remove the Front Cover

Open the Wall Light

(AA) by unscrewing

the Front Cover Screws (BB) using a

AA

phillips screwdriver

(not provided).

BB

Remove the Front Cover from the Back Plate by disconnecting the quick connect wires and sliding the Front Cover in an upward direction.

3 Prep the Back Plate
Drill 2 holes using a 1/4 in. drill bit on the universal knockouts on the Back Plate needed to install on your J-Box.

5 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Flush J-Box Mount Installation (continued)

4 Remove the Center Knockout
Remove the knock out on the Back Plate by using a phillips screwdriver (not provided).

6 Re-Attach the Front Cover
Re-attach the Front Cover to the Back Plate and re-connect the quick release wires.

Center Knock Ou t

5 Connect the Power Supply Wires
Feed the power supply wires through the knockout hole and mount the Back Plate to the J-Box using the J-Box Mounting Screws (DD).
Observe horizontal level before tightening screw.
Level

Close the Front Cover and secure with the Front Cover Screws (BB).
BB

DD

Using Wire Connectors (FF), connect wires coming from the LED driver on the Back Plate to the power supply wires:
See wiring diagram A or diagram B on page 7.

NOTE: Purple and Pink wires to be used with 0-10V dimmers only (purple +10V, pink -10V).

Purple (+10V) – Purple from dimmer

Pink (-10V) – Pink

FF

from dimmer.

See wiring diagram B.

7 Apply Sealent
Once the fixture is tightly secured to the wall, apply silicone sealant around the base of the fixture to prevent moisture from reaching the connections.
8 Turn Power On
Turn power back on at the wall switch, circuit breaker or fusebox.

6 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Wiring for a Standard Wall Switch

Supply Line (Black)
Supply Neutral (White)
Supply Grounding (Green or Green/Yellow)

WIRING DIAGRAM A Twist-on wire connector

Line (Black) Neutral (White)

LED DRIVER

J-Box Grounding ((GGrereneno)r Bare)

Connector to LED

Wiring for 0-10V Dimmer

Supply Line (Black) Supply Neutral (White)
0-10V Dimmer Supply Grounding
(Green or Green/Yellow)

WIRING DIAGRAM B Twist-on wire connector

Line (Black) Neutral (White) Purple (+10V)

LED DRIVER

Connector to LED

Pink (-10V)

J-Box Grounding ((GGrereeenno)r Bare)

Lumen/Color Select Switch
Lumen Switch Select the brightness: 4000, 6000 or 8000 lumens
CCT Switch Slide the Color Temperature switch to point to either 3K, 3.5K, 4K, 5K, 6.5K. 3K (3000K) ­ Soft White 3.5K (3500K) ­ Neutral White 4K (4000K) ­ Bright White 5K (5000K) ­ Daylight 6.5K (6500K) ­ Daylight Deluxe

4000 6000 8000 –
LUMEN

– 3K – 3.5K – 4K – 5K – 6.5K
CCT

7 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Troubleshooting

Problem

Possible Cause

Solution

The power is off.

Make sure the power supply is on.

The light will not illuminate.

There is a faulty wire connection.

Check the wiring. Contact a qualified and licensed electrician if you are not comfortable troubleshooting wiring problems.

There is a faulty wire switch. Test or replace the switch.

The light does not automatically turn off The photocell is covered. during daylight hours.

1. Remove any debris and clean the photosensor. 2. Remove sensor cover

Security light cycles ON and OFF continuously

Dusk-to-Dawn sensor is sensing reflected light from the security light or other surrounding light source.

1. Ensure no reflective materials are near to the wall pack.
2. Relocate the LED Wall Pack to a different location where it no longer causes reflected light.

8 FEIT ELECTRIC COMPANY I PICO RIVERA, CA | 800-543-3348 | FAX 562-908-6360 | www.feit.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>