ALITOVE A-SL-02 String Lights User Manual
- September 26, 2024
- ALITOVE
Table of Contents
ALITOVE A-SL-02 String Lights
INTRODUCTION
Category: String Lights
Model Number: A-SL-02
Domination Principle: Ble
APP: Surplife
Power Supply: Our Plug Makes Input AC 120V Reduced To DC 30V for Safety
Supported Driver IC : SM16703P, WS2812E, UC1903B, ASL 140140, IC2811F,
TM1814, WS2815B, WS2812B, SM16703, SM16704, WS2811, UCS1903, SK6812, INK1003,
UCS2904B
Working Temperature : -20~+55°(
Control Distance: Visible distance 30M
Dmension: 10M / 20M / 30M / 50M / 60M /SOM/ 100M
Download Surplife APP
Download “Surplife” in App Store, register and make sure Bluetooth of mobile phone is turned on.
How to Connect to Surplife APP
Register/Login your Surplife account.
Enter “Surplife” app, tap “add device” or click 11+11 to add the device.
Rename the device and select a room for it.
Remote Control
Key Instruction
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Frequently Asked Questions
How to set up your Bluetooth LED string light?
- Enable your Bluetooth on your phone.
- Then power on the LED string light.
- Open “Surplife” App, the App can directly connect to the device. It can automatically match the light without other steps, and you can experience the smart light simply and quickly.
How can i do if connecting the Bluetooth device or adding new device failed?
Please power off the led string light, then turn it on again, if the problem
can’t solve, please restart the phone.