SONY YY2948 Wireless Noise Canceling Stereo Headset User Guide

: June 6, 2024
: Sony

Table of Contents

Precautions
Specifications
Communication specification
System requirements for battery charge using USB
Compatible iPhone/iPod models
Trademarks
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wireless Noise Canceling Stereo Headset
Reference Guide
WF-1000XM4

https://rd1.sony.net/help/mdr/wf1000xm4/h_zz/

SONY YY2948 Wireless Noise Canceling Stereo Headset -
QR https://rd1.sony.net/help/mdr/wf1000xm4/h_zz/?cid=qr0im000
Wireless Noise Canceling Stereo Headset

This product will generate heat when charging. Always charge in a well-ventilated area. Do not charge under pillows, blankets, or on flammable surfaces.
Keep this product away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids.
Do not disassemble, open, microwave, incinerate, paint or insert foreign objects into this product.
Do not subject this product to mechanical shock such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on this product.
Do not short-circuit this product or store it in a receptacle where it may be short-circuited by other metallic or conductive objects.
Do not operate this product if it has been wet or otherwise damaged, to prevent electric shock, explosion and/or injury. Contact the dealer or authorized agent for assistance.
This product usage by children should be supervised.
Please read the operating instructions (including charging instructions and information on the minimum and maximum operating temperatures), supplied with this product.

Without permission granted by the NCC, no company, enterprise, or user shall change frequency, enhance transmitting power or alter original characteristics as well as the performance of approved low power radio-frequency devices.
The low power radio-frequency devices shall not influence aircraft security nor interfere with legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications refer to radio communications operated in compliance with the Telecommunications Management Act. The low-power radio-frequency devices must endure interference from legal communications or ISM radio wave radiated devices.
The nameplate and important information concerning safety are attached in the following locations:

the bottom of the charging case

Do not install the product in a confined space, such as a bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries installed) to excessive heat, such as sunshine, fire or the like, for a long time. Do not subject the batteries to extreme low-temperature conditions that may result in overheating and thermal runaway.
Do not dismantle, open, or shred secondary cells or batteries.
In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Secondary cells and batteries need to be charged before use. Always refer to the manufacturer’s instructions or product manual for proper charging instructions.
After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
Dispose of properly.
This unit has been tested and found to comply with the limits set out in the EMC regulation using a connection cable shorter than 3 meters.
Do not use, store, or leave in a place subject to high amounts of humidity, dust, smoke, or steam, or in a place subject to high temperatures, such as near a fire or a location subject to direct sunlight, such as in a car.
High volume may adversely affect your hearing.
Do not use the unit while walking, driving, or cycling. Doing so may cause traffic accidents.
Do not use in hazardous areas unless the surrounding sound can be heard.
If water or foreign matter enters the unit, it may result in fire or electric shock. If water or foreign matter enters the unit, stop use immediately and consult your nearest Sony dealer. In particular, be careful in the following cases.

When using the unit near a sink or liquid container Be careful that the unit does not fall into a sink or container filled with water.
When using the unit in the rain or snow, or in humid locations

For details on the effects of contact with the human body from the mobile phone or other wireless devices connected to the unit, refer to the instruction manual of the wireless device.
If the earbud tips are not securely attached, they may fall off and remain inside the ear during use. Make sure that the earbud tips are securely attached before use.
Never insert the USB plug when the unit or charging cable is wet. If the USB plug is inserted while the unit or charging cable is wet, a short circuit may occur due to liquid (tap water, seawater, soft drink, etc.) or foreign matter on the unit or charging cable and cause abnormal heat generation or malfunction.
This product (including accessories) has a magnet(s) that may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.
This product (including accessories) has a magnet(s). Swallowing magnet(s) could cause serious harm, such as choking hazards or
intestinal injuries. If magnets (or a magnet) were swallowed, consult a doctor immediately. Keep this product away from children or other supervised individuals to prevent accidental ingestion.
There is a danger that this unit or its small parts may be swallowed. After use, store the unit in the charging case and store in a location out of reach of small children.
Note about static electricity
If you use the unit when the air is dry, you may experience discomfort due to static electricity accumulated on your body. This is not a malfunction of the unit. You can reduce the effect by wearing clothes made of natural materials that do not easily generate static electricity.

Complies with IMDA Standards DB00353

Precautions

The two-dimensional code or the URL on the cover will help you access the help guide that describes useful notes or procedures in detail.
On water-resistant of the unit

The charging case is not water-resistant.
Unless the unit is used correctly, water may get into the unit and cause fire, electrocution, or malfunctions.
Note the following cautions carefully and use the unit correctly.

To maintain water-resistant performance
Carefully note the precautions below to ensure proper use of the unit.

Do not splash water forcibly into the sound output holes.
Do not drop the unit into the water and do not use it underwater.
Do not allow the unit to remain wet in a cold environment, as the water may freeze. To prevent malfunction, make sure to wipe off any water after use.
Do not place the unit in water or use it in a humid place such as a bathroom.
Do not drop the unit or expose it to mechanical shock. Doing so may deform or damage the unit, resulting in deterioration of water resistance performance.

On BLUETOOTH® communications

Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident:
– in hospitals, near priority seating in trains, locations where inflammable gas is present, near automatic doors, or near the fire alarms.

On charging the unit

Do not attach metallic objects such as stickers made from a material containing metal on the wireless charging pad and unit. Doing so may cause fires, burns, or injuries.
When using the wireless charging pad, do not place metallic objects such as straps or clips made from a material containing metal on the wireless charging pad. Doing so may cause fires, burns, or injuries.
When charging with the wireless charging pad, remove the parts such as covers attached to the charging case. Depending on the material or thickness of the cover, or due to foreign objects caught between the charging case and the cover, charging may not be performed properly, resulting in fires, burns, or injuries.
When you have medical electric devices such as pacemakers or defibrillators implanted, consult your doctor before using the wireless charging pad. Radio waves may affect the operations of medical electric devices.
Do not bring IC cards, magnetic cards, or magnetized objects close to the wireless charging pad. Doing so may cause IC cards to malfunction. Magnetic data may be erased from cash cards, credit cards, telephone cards, or floppy disks. When strong magnetism is brought close by, it may cause the wireless charging pad to malfunction.
The unit is charged when it is stored in the charging case. The charging case is compatible with the wireless charging pads that meet the Qi standard. Close the lid of the charging case and charge the charging case by placing it on the wireless charging pad with the SONY logo of the charging case facing upward. When charging, refer to the operating instructions of the wireless charging pad.
Be sure to use the supplied USB Type-C cable.

Notes on wearing the unit

After use, remove the headphones slowly.
Because the earbud tips achieve a tight seal in the ears, forcibly pressing them in or quickly pulling them out can result in eardrum damage.
When wearing the earbud tips, the speaker diaphragm may produce a click sound. This is not a malfunction.

On the earbud tips (Noise Isolation Earbud tips)

As the earbud tips fit more snugly in your ears, you may feel a strain to your ears. If you experience discomfort, discontinue use.
Do not pull on the polyurethane foam portion of the earbud tips. If this portion is separated from the earbud tips, the earbud tips will not function.
Do not subject the polyurethane foam portion of the earbud tips to pressure over long periods. It may cause deformation and it may be difficult to return the earbud tips to their original shape.
When the earbud tips become dirty, do not wash them in water but wipe off the dirt using a dry cloth. Do not use alcohol, etc. when cleaning. Doing so may quicken the deterioration.
When the earbud tips get soaked, drain the liquid well and make sure that the earbud tips are dried before use or storage.
The foam materials used in the earbud tips deteriorate through long-term use and storage. Replace the earbud tips as deterioration causes reduced performance.

Other notes

If you experience discomfort while using the unit, stop using it immediately.
If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer.

Location of the serial number label

the bottom of the charging case

Specifications

Headset
Model: YY2948
Power source:
DC 3.85 V: Built-in lithium-ion rechargeable battery
DC 5 V: When charged using a USB
Operating temperature:
0 °C to 40 °C
Rated power consumption:
1 W (Headset), 3 W (Charging case)
Mass:
Approx. 7.3 g × 2 (Headset (including earbud tips (M)))
Approx. 41 g (Charging case)
Included items:
Wireless Noise Canceling Stereo Headset (1)
USB Type-C® cable (USB-A to USB-C®) (approx. 20 cm) (1)
Earbud tips: S (orange) (2), M (green) (2), L (light blue) (2)
Charging case (1)

Communication specification

Communication system:
Bluetooth Specification version 5.2
Output:
Bluetooth Specification Power Class 1
Frequency band:
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Design and specifications are subject to change without notice.

System requirements for battery charge using USB

USB AC adaptor
A commercially available USB AC adaptor capable of supplying an output current of 0.5 A (500 mA) or more

Compatible iPhone/iPod models

iPhone SE (2nd generation), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPod touch (7th generation), iPod touch (6th generation) (As of February 2021)

Trademarks

Apple, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Google and Android are trademarks of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc., and any use of such marks by Sony Corporation is under license.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
Other trademarks and trade names are those of their respective owners.

Notes on the License
This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of the copyright for the software.
Please access the following URL and read the contents of the license. https://rd1.sony.net/help/mdr/sl/21/

Disclaimer regarding services offered by third parties
Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.

BLUETOOTH