ALITOVE S-360-24 Power Supply User Manual
- August 23, 2024
- ALITOVE
Table of Contents
ALITOVE S-360-24 Power Supply
INTRODUCTION
Power sources as strong and dependable as the ALITOVE S-360-24 Power Supply are made for a variety of domestic and commercial uses. This power supply can easily handle tough activities thanks to its DC 24V output and 360W maximum power rating. With its variable voltage settings (21.6V to 26.4V), you may precisely tune the power to suit your demands. The S-360-24, made by the reliable power solutions brand ALITOVE, guarantees safety and complies with FCC, CE, and RoHS regulations. Its small size (4.41 x 8.46 x 1.96 inches) and lightweight (1.64 pounds) make it simple to set up and operate in a variety of configurations. At a cheap price of $23.99, this power supply is a great option for both do-it-yourselfers and professionals. The ALITOVE S-360-24 is a dependable option for powering LED strips, CCTV cameras, and other electrical equipment.
SPECIFICATIONS
| Brand | ALITOVE |
|---|---|
| Power Source | DC 24V |
| Mounting Type | Wall Mount |
| Current Rating | 15 Amps |
| Input Voltage | AC 100V |
| Output Voltage | DC 24V (±10% adjustable, 21.6V~26.4V) |
| Output Current | 15A max |
| Output Wattage | 360W max |
| Fix Screw Hole Diameter | 2.5mm (0.1 inch) |
| Working Temperature | -10℃ ~ 50℃ (-50 ℉ ~ 122℉) |
| Storage Temperature | -20℃ ~ 60℃ (-68 ℉ ~ 140℉) |
| Environmental Humidity | 10-95% |
| Safety Compliance | FCC / CE / Rohs |
| Maximum Frequency | 60 Hz |
| Minimum Frequency | 50 Hz |
| Manufacturer | ALITOVE |
| Product Dimensions | 4.41 x 8.46 x 1.96 inches |
| Item Weight | 1.64 pounds |
| Item Model Number | S-360-24 |
| Price | $23.99 |
WHAT’S IN THE BOX
- Power Supply
- Manual
PRODUCT OVERVIEW
PRODUCT DIMENSIONS
FEATURES
- Superior Safety: The power supply and any attached devices are protected from overvoltage, overcurrent, overheating, and short circuits by built-in safeguards.
- Intelligent Temperature Control: Equipped with a temperature sensor and an automated cooling fan. When the internal temperature hits 113°F (45°C), the fan turns on, improving heat dissipation effectively and silently.
- ±10% Voltage Adjustment: Offers versatility for a number of applications by allowing the output voltage to be varied within a ±10% range, from 21.6V to 26.4V.
- Three independent output channels, each with a maximum output current of 15A and 360W, are provided. This enables the simultaneous powering of numerous devices.
- Stable Output: This system reduces electromagnetic interference by converting a fluctuating input voltage into a stable output through the use of an advanced synchronous rectifier smart chip and an EMI filter.
- Adjustable Input Voltage: Comes with a switch to adjust input voltage between 110V and 220V to comply with local power requirements and avoid damage.
- Automatic Overload Cut-Off: Protects the power supply and linked devices by automatically shutting down in the event of an overload.
- Over Voltage Cut-Off: Limits harm by shutting off electricity if the output voltage rises above acceptable bounds.
- Automatic Thermal Cut-Off: If the temperature rises over safe operating limits, this feature prevents overheating by cutting off the power supply.
- Short Circuit Protection: Prevents damage from short circuits by interrupting electricity when they occur.
- Effective Cooling: The integrated fan operates just when required, ensuring effective cooling without creating undue noise.
- High Power Capacity: Suitable for high-power devices and applications, this capacity can offer up to 15A and 360W of total output power.
- Universal Input: Capable of receiving input voltages of 110V or 220V AC, it may be adjusted to various power standards across the globe.
- The purpose of LED drivers is to efficiently power LED strips and other LED-based devices.
- Compact Design: Offers a significant power capacity in a comparatively small package, making it appropriate for a range of installations and settings.
SETUP GUIDE
- Examine and Unpack: Gently take the power supply out of its package, then look for any obvious damage.
- Choose Input Voltage: To operate in North America set the voltage switch to 110V; to operate in Europe or other regions with other voltage standards, set it to 220V.
- Connect Power Input: Using the input voltage that has been chosen, plug the power supply into an appropriate AC outlet.
- Connect Output Devices: Make sure the devices you want to power are connected to the correct output channels and have the proper polarity.
- Modify Output Voltage: If required, alter the output voltage within the ±10% range using the voltage adjustment.
- Verify Connections: To avoid electrical shorts or damage, make sure all connections are safe and adequately insulated.
- Switch on the power supply and keep an eye out for any strange sounds or signals.
- Keep an eye on the temperature: Make sure the cooling fan turns on when the inside temperature hits 113°F (45°C).
- Test Devices: Turn on the linked devices and make sure the voltage is correct and they are operating steadily.
- Modify Settings: If necessary, adjust the output voltage to ensure that it satisfies the requirements of your equipment.
- Assure Ventilation: To maintain ideal cooling, locate the power supply in a well-ventilated place.
- Safe Location: To prevent unintentional disconnections or falls, make sure the power supply is positioned on a level, sturdy surface.
- Regular Inspection: Look for wear or damage on the power supply and connections on a regular basis.
- Prevent Overloading: To guarantee safe operation, do not surpass the maximum current ratings for every channel.
- Power Down for Maintenance: Before beginning any repairs or modifications, make sure you always unplug and turn off the power supply.
CARE & MAINTENANCE
- Routine Cleaning: To remove dust and debris, wipe the outside with a dry or slightly moist cloth. Steer clear of employing harsh solvents or chemicals.
- Verify Connections: Ensure that all electrical connections are regularly inspected for wear and loose fittings. Tighten or replace as necessary.
- Maintenance of Ventilation: To preserve appropriate airflow and cooling effectiveness, make sure that vents and cooling fans are clear of obstacles.
- Examine Power cable: Observe the power cable on a regular basis for any indications of wear or damage, and replace it as needed.
- Avoid Overloading: To avoid damaging the power supply and any attached devices, do not exceed the rated current or voltage restrictions.
- Temperature monitoring: Make sure the power supply doesn’t overheat and the cooling fan runs properly. Make sure there is enough airflow if overheating happens.
- Safe Storage: To avoid moisture or heat damage, store the power source in a dry, cold place when not in use.
- Periodic Testing: Use a multimeter to check the power supply on a regular basis to make sure it is producing a steady output voltage.
- Fuse Replacement: To ensure functioning and safety, replace any replaceable fuses in the power supply as soon as they blow.
- Prevent Water Exposure: To avoid electrical dangers, keep the power supply away from moisture and water.
- Prevent Physical Damage: Take caution when handling it to prevent dropping it or putting it in situations where physical impacts could harm its insides.
- Verify Output Voltage: Make sure the output voltage stays within the intended range by using a voltmeter on a regular basis.
- Maintain Cleanliness: To avoid dust accumulation and guarantee effective functioning, keep the area surrounding the power supply clean.
- Replace Worn Parts: To ensure dependable and safe performance, replace any worn or broken parts as soon as possible.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| No power output | Power not connected properly | Ensure the power supply |
is plugged in securely.
Output voltage too low| Voltage adjustment needed| Adjust the output
voltage to the desired level.
Overheating| Insufficient ventilation| Improve ventilation or relocate
the power supply.
Intermittent power| Loose connections| Check and secure all connections.
No LED indicator| Faulty power supply or LED| Replace the power supply
or LED indicator.
Noise from the unit| High load or faulty components| Reduce load or
inspect components for damage.
Frequent shutdowns| Overload protection triggered| Reduce the connected
load to within the 360W limit.
Voltage fluctuating| Unstable input power| Ensure stable AC input or use
a power stabilizer.
Sparking at terminals| Loose or corroded connections| Tighten or clean
the terminals.
Burning smell| Overheating or short circuit| Turn off immediately and
inspect for damage.
Unit not fitting mount| Incorrect mounting setup| Adjust the mounting
setup or use compatible screws.
The device not powering on| Incorrect voltage setting| Verify and adjust
the voltage to the correct level.
Unit buzzing| Electrical interference| Try moving the unit away from
other electronics.
Output current too low| Insufficient power supply capacity| Ensure the
load does not exceed 15A.
PROS & CONS
Pros:
- High power output of 360W, suitable for demanding applications.
- Adjustable voltage range for versatile use.
- Compact and lightweight design for easy installation.
- Compliance with safety standards (FCC, CE, RoHS).
- Affordable price for a high-quality power supply.
Cons:
- Requires proper ventilation to avoid overheating.
- Limited to 24V DC output , not suitable for other voltage requirements.
- Fixed screw hole diameter may not fit all mounting setups.
- Basic design without additional protective casing.
- May need frequent adjustments for precision voltage control.
WARRANTY
The ALITOVE S-360-24 Power Supply comes with a 1-year limited warranty from the date of purchase. This warranty covers any defects in materials or workmanship under normal use. If the power supply fails due to a manufacturing defect, ALITOVE will repair or replace it at no additional cost. The warranty does not cover damage caused by misuse, unauthorized modifications, or improper installation. To make a warranty claim, customers must provide proof of purchase and contact ALITOVE’s customer service for assistance.
FREQUENTLY ASKED QUESTIONS
What is the ALITOVE S-360-24 Power Supply used for?
The ALITOVE S-360-24 Power Supply is used to provide a stable 24V DC output for various electronic devices and systems, including LED strips, industrial equipment, and other DC-powered applications.
What is the input voltage range for the ALITOVE S-360-24?
The ALITOVE S-360-24 accepts an input voltage range of AC 100V120V or 200V260V, making it versatile for different power environments.
What is the output voltage of the ALITOVE S-360-24?
The output voltage of the ALITOVE S-360-24 is DC 24V, with an adjustable range of ±10% (21.6V~26.4V).
What is the maximum output current for the ALITOVE S-360-24?
The ALITOVE S-360-24 can provide a maximum output current of 15 amps.
What is the maximum output wattage of the ALITOVE S-360-24?
The maximum output wattage of the ALITOVE S-360-24 is 360 watts.
What are the dimensions of the ALITOVE S-360-24?
The dimensions of the ALITOVE S-360-24 are 4.41 x 8.46 x 1.96 inches.
How much does the ALITOVE S-360-24 weigh?
The ALITOVE S-360-24 weighs 1.64 pounds.
What is the operating temperature range for the ALITOVE S-360-24?
The ALITOVE S-360-24 operates within a temperature range of -10℃ to 50℃ (14℉ to 122℉).
What is the storage temperature range for the ALITOVE S-360-24?
The storage temperature range for the ALITOVE S-360-24 is -20℃ to 60℃ (-4℉ to 140℉).
What is the environmental humidity range for the ALITOVE S-360-24?
The ALITOVE S-360-24 can operate in environments with humidity levels between 10% and 95%.
What safety certifications does the ALITOVE S-360-24 have?
The ALITOVE S-360-24 is compliant with FCC, CE, and RoHS safety standards.
What is the diameter of the fix screw hole for the ALITOVE S-360-24?
The fix screw hole diameter for the ALITOVE S-360-24 is 2.5mm (0.1 inch).
What is the price of the ALITOVE S-360-24 Power Supply?
The ALITOVE S-360-24 Power Supply is priced at $23.99.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>