AIRFLEXE AR2600 IV02-24B-RAXW Air Purifier User Manual

AIRFLEXE AR2600 IV02-24B-RAXW Air Purifier

Unit and component

Disinfection principle and product structure

Disinfection principle

This product adopts the form of circulating wind to drive the polluted air into the ultraviolet sterilizer, caused by the polluted air, combines high- intensity ultraviolet ray, anion purification, and primary and high-efficiency filtration layer to realize the disinfection function. Since the ultraviolet lamp is sealed in the disinfection chamber, the air can realize the disinfection function when it passes through the disinfection chamber, so the product has no ultraviolet light leakage. And the ozone concentration in the work of UV lamp is 0.1 mglm3, which is in line with national standards of 0.15 mg/m3• Therefore, this product can realize the “man-machine coexistence”. This product mainly comprises a primary filter, high-efficiency filter, silver ion and lighting self-cleaning coating, UV resistant layer, high-intensity UV sterilization layer, anion purification, and the combination of motor, wind wheel, control module, and air duct accessory.

Using guide

1. Remove front pane
2. Remove UV-resistant high-efficiency silver ion and light self-cleaning coating HEPA filter
3. Install UV-resistant high-efficiency silver ion and light self-cleaning coating HEPA filter
4. lnstall front panel
5. Connect power
6. Turn on the switch and run the machine

Precautions

In order to prevent harm or property damage, please be sure to follow the following regulations and instructions.

• This sign indicates that the content is: assuming the possibility of death or serious injury.

• This sign indicates that the content is: prohibited content.

• Forbidden disassembly Do not disassemble and reform by non­professionals as to avoid damage and injury.

• Do not turn on the UV lamp after removing the filters and anti-UV layer.

• Do not use other ac power supplies (which exceed the standard spec of the machine will cause product damage or other damage).

• Please insert the plug completely into the power socket before starting the machine. If not, it may cause electric shock and overheating, even fire accidents. Do not use a damaged plug or loose power socket.

• Do not put any foreign matter into the inlet and outlet to avoid electric shock and injury.

• Please remove the power cord when cleaning the machine. Else it may cause electric shock and injury.

• Do not touch the power plug with a wet hand, or else may cause an electric shock easily.

• Keep the machine dry, or else it may cause a short circuit or electric shock.

• Do not use the machine in a seriously damp environment such as a bathroom, otherwise easy to causes electric leakage, electric shock, fire, etc.

• Do not use the insecticide sprays while the machine is running. Let the indoor air circulate adequately first after using the insecticide, otherwise, it can make the machine interior accumulates medicaments composition, adverse to human health.

• Do not wipe the unit with alcohol or organic solution, otherwise, it may cause product damage or electric shock, even a fire accident.

• Do not close to combustible materials or ignition sources.

• Do not use the machine under a high lampblack environment such as the kitchen, otherwise, the machine will cause damage, and can not be used as a ventilation fan.

• If the unit works together with an electric heater, the room should keep ventilation. The machine can not remove the carbon monoxide,
  or else there may be a carbon monoxide poisoning accident.

• Hold the plug when you take out the power plug and do not pull wires which may cause short circuits or damage to wires to avoid a fire accident and electric shock.

• Please close the door and window as for fast purification of the room air.

Notice
Please turn off the power immediately in case of any of the following situations

• Malfunction of any switch
• Power supply short circuit
• Animal heating of wires or plugs
• Any bu mt smell, animal sound, or shock
• Any other animal or malfunction

Remark:
If the cord of the power cord is damaged,it must be replaced by a professional from the manufacturer,its maintenance department or a similar department in order to avoid danger.

Operation

Turn on
Push the touch button to turn on the machine. Enter automatic mode immediately after booting.

The icon is always bright after boot. When the corresponding function is enabled, the text indicator light will be on, the digital area will be displayed before 10s, and then the PM 2.5 value will be displayed.

Automatic disinfection
Boot default automatic mode; the air volume is adjusted with PM 2.5.

The spec relationship corresponds as follows:

Wind speed adjustment
Touch the “wind speed” button on the key screen, you can manually adjust the disinfection air volume, adjust the Pl ~3 gears, and the PO automatic mode circulating air volume to increase the sterilization speed. Timer function
Push the “Timer” key to set up the sterilizer working time from 1 to 12 hours to close, cycle options.When the timer function is turned on, the indicator light is bright.

Sleep mode

1. Touch the “Sleep” button on the key screen to enter the sleep mode, the air quality indicator is off, and the rest of the indicators are off except for the sleep indicator.
2. Sleep mode is forced to work at level l; Any key can deactivate the sleep mode and return to the pre-sleep state.

Plasma
Push the “Plasma” key to enter the plasma function.

Child lock function

1. Push the “Child lock” key to enter the child lock function, long press can be unlocked it.
2. When the child lock is not on, press and hold this button for 3 seconds to view the accumulated usage time of the filter, displayed in the PM2.5 area. The filter indicator lights up, and when four digits are displayed, it is displayed as a three-digit running.

Sterilization function
Push the “disinfection” key, turn on or off the UV lamp, and turn on or off the ultraviolet sterilization function.

Filter replacement

Filter replacement reminder
The cumulative working time of the filter was detected to reach 2000 h, the filter replacement indicator is bright.

Long press the “Child lock” key for 3s to check out the cumulative working time of filters, also can clear the use time of the new filter.

Replace the filter step

1. Take out the front panel
2. Install UV-resistant high-efficiency silver ion and light self-cleaning coating HEPA filter
3. lnstall the front panel

Disinfection and purification function

Physical filtration of bacteria and dust

1. The dust and microorganism bacteria in the air are filtered by physical filtration, and the air is sterilized by combining with high-intensity ultraviolet rays. At the same time, the influence of dust on the ultraviolet lamp radiation intensity was effectively prevented by the filter.UV lamps and filters can be easily replaced and loaded.
   Silver ion and Lighting Self- Cleaning Coating on HEPA Filters

2. The patented technology of silver ion and lighting Self – cleaning coating kills SARS-CoV-2 viruses and Bacteria immediately.
   High-intensity ultraviolet sterilization

3. The high-intensity ultraviolet lamp tube is sealed in the disinfection chamber, combined with the filter layer and the anti-ultraviolet layer to form the sterilization of the high-intensity ultraviolet radiation zone. Bacteria and viruses remaining in the filter layer and light-blocking layer will be killed to prevent secondary pollution. The bacteria in the indoor air will be killed under the circulation of the wind wheel and wind duct.
   Plasma clean air

4. The plasma generator produces both negative ions and positive ions at the same time. Since the number of negative ions is greater than the number of positive ions, then the surplus negative ions are still floating in the air, can achieve smoke elimination, dust removal, odor elimination, and improve the air quality, in order to promote human health care rule.
   Easy to use

5. When the product is started,it is automatically switched on. After the purifier is turned on, the ultraviolet lamp tube is opened synchronously, and the gear
   is in the automatic gear, which automatically adjusts the wind speed gear according to the air quality.

Technical Parameters

This product complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume (ppmv) in a 24-h period.

Cleaning and maintenance

NOTICE: Pull out the Plug before maintenance and cleaning.

The main machine:
Please wipe the surface of the machine regularly with a damp cloth with a small amount of detergent water, and clean the air inlet&outlet with a brush.

UV lamp:
The radiation intensity height of the UV lamp will affect the air disinfection effect, every month should wipe the UV lamp with an alcoholic cotton ball once at least. To ensure that the radiation intensity height of the UV lamp is not affected by dust.

Sensor:
regularly clean the sensor lens and surface with a wet cotton swab,and then clean the remaining water stains on the sensor with a dry cotton swab.

Filters:
The filter replacement is reminded by the built-in program, each filter can be used for about 6-8 months, if the use of environmental pollution is serious, the filter needs to be replaced in advance, and the filter can be obtained from the designated dealer.

Filter care:
UV air purifier needs to maintain its filter regularly to make the best performance.

Primary cotton filter

• about3 months only use a vacuum cleaner

UV-resistant high-efficiency silver ion and light self-cleaning coating HEPA filter

• about3 months only use a vacuum cleaner

Troubleshooting

Please confirm the faults before sending for maintenance below cases .

After-sales service rights and interests

1. According to the “three guarantees” provisions of the state.
2. The machine enjoys the lifelong maintenance service of the company’s after-sales service center.
3. The following situations fall outside the scope of the “three guarantees”:
   • The machine is damaged due to human factors.
   • Damage caused by disassembling and repairing without authorized by the company.
   • Normal loss and wear during operation.
   • Filters.
   • Damage caused by improper installation and use according to the operation manual.

Matters needing attention
In order to protect your rights and interests, please pay attention to the following information:

1. When purchasing the machine, fill in your after-sales service card completely, correctly and truly, and get the stamp or seal of the seller.

2. Please properly keep the after-sales service card that has been filled in and stamped with the seller’s seal.

3. Effective after-sales service card is the basic guarantee for you to enjoy the rights and interests of after-sales service. (the effective after-sales service card is comprehensive, true, correct and free of alteration).

4. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

5. This appliance contains a UV-C emitter. Unintended use of the appliance or damage to the housing may result in the escape of dangerous UV-C radiation. UV-C radiation may, even in little doses, cause harm to the eyes and skin.
   Appliances that are obviously damaged must not be operated.

6. This instruction can get from http://www.rocketa.com.hk.

After-sales warranty card

IV02-24B-RAXW Air Purifier Warranty Card

APP Download

NOTE
Long press the plasma button for 3s, the WI Fl enters the state of network distribution, and the WIFI icon flashes quickly.In successfully connected WIFI mode, you can still use the buttons on the product to control. To disable WIFI mode, press the plasma button for 3s. If you need to reconnect, hold down 3s again to enable WIFI function.

Steps

1. Click on the upper right corner
2. Choose to open in the browser
3. Click to download and install
4. Download and install
5. The installation is successful and opens the APP
6. Click “Sign up”
7. Enter your mobile phone number or email address and click “Next”
8. Enter the verification code and set the password as required
9. Successful registration, click “Add Device”
10. In the small household appliances, click “Air Purifier”
11. Enter the WI Fl password and click “Next”
12. Long press the “PLASMA” button for 3 seconds to start the WIFI function, and then click “Next”
13. Connecting
14. Connected successfully
15. APP operation interface

Controlling Authorization

1. Click “Personal Center” in the upper right corner
2. Click “Share Device”
3. Click “Add Share”
4. After entering the user account you want to authorize, click “Finish”
5. If the sharing is successful, the authorized user can control the air purifier
6. Press and hold the authorized user, and swipe left to perform the “delete” operation

To ensure that you can fully understand and correctly install and use this product, please read the instructions carefully. It is recommended that you keep the manual properly for reference when needed.

Note:
Due to product updates and replacement, if there is any difference in this manual. please refer to the actual product

luteolytic Ventures Limited

• Address: 6/F, 102 Jervois Street, Kong Ling Building Sheung Wan, Hong Kong
• Tel No: 852-3421-0208 Fax No: 852-31862513
• E-Mail: rocketabusiness@gmail.com
• Website: http://www.rocketa.com.hk.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>