Lumilawn MAX-007 Solar Lights Owner’s Manual

September 25, 2024
Lumilawn

Lumilawn MAX-007 Solar Lights

Product Specifications

  • Includes : 2 Solar Lights, 2 Plastic Ground Stakes, 2 Link Tubes, 1 Instruction Manual
  • Solar Battery Lamp: Converts sunlight into electricity and charges automatically during the day
  • Weather- resistant design

Product Usage Instructions

Charging the Solar Light:

  1. Ensure the power switch is ON.
  2. Place in a location not near strong light sources.
  3. Position in a sunny location with the solar panel facing the sun.
  4. Check battery connection.

Precautions:

  • Avoid strong nearby light sources to prevent dimness.
  • Charge the battery for a full day before first use.
  • Keep the solar panel clean for optimal charging efficiency.

How Solar Light Works:
The solar panel charges the battery during the day, and the light turns on automatically at night using stored energy.

Installation:

  1. Twist the lamp roof gently.
  2. Remove the isolator tab.
  3. Pull out the ground stake.
  4. Connect stake to link tube.
  5. Attach the pole to the lamp.
    The solar panel should be in a well-lit location for maximum sunlight exposure.

Product Recycling and Disposal Instructions

  • Recycle responsibly to promote sustainable use of resources. Return used devices to designated collection points or retailers for safe recycling.
  • Manufacturer’s declaration of compliance with EU Directives.

FAQ

  • What should I do if the light does not turn on automatically at night?
    Check the power switch, surrounding light sources, solar panel orientation, and battery connection.

  • How do I maximize the performance of the solar light?
    Charge the battery for a full day before initial use, keep the solar panel clean, and ensure optimal sunlight exposure during the day.

  • Can the solar lights withstand weather conditions?
    Yes, the lights and solar panel box are weather-resistant and suitable for outdoor use under various weather conditions.

PLEASE READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THE SOLAR LIGHT. SAVE THIS MANUAL FOR FUTURE REFERENCE.

PARTS LIST

Please check if the following parts are included: 2 Solar Lights, 2 Plastic Ground Stakes, 2 Link Tubes, 1 Instruction Manual

  1. Solar Battery Lamp: The solar panel converts sunlight into electricity and automatically charges during the day.
  2. Accumulator: Lights automatically at night.
  3. Special Texture Lamp Mask: Provides soft and uniformly refracted light with a special halo.
  4. Link Tube
  5. Ground Stake

PRODUCT SPECIFICATIONS

  • Model No.: MAX-007
  • Batteries: 1x AA (Included), 1.2V, 200mAh
  • 1 PCS LED
  • Lifespan: 50,000 hours
  • Lumens: 8 lm
  • Size: 10 x 10 x 43 cm
    These solar pathway lights are solar-powered and require no extra power. Outdoor solar lights charge automatically by absorbing sunlight during the day. 6-8 hours of charging can provide 10-12 hours of lighting throughout the night.

ATTENTION FOR FIRST TIME USE :
There is a button in the battery box. Please press it to the “ON” position to activate the automatic system. When the environment becomes dark, the solar light will turn on automatically. During the day, the solar light will turn off and store energy from the solar panel. If you press the button again, the current will be cut off to conserve energy. If the light does not turn on automatically at night after 6 hours of daytime charging, please check the following:

  1. Ensure the power switch is in the “ON” position.
  2. Make sure the selected location is not near strong light sources such as street lights, which may prevent the light from turning on automatically due to the built-in brightness sensor.
  3. Verify that the light is in a sunny location, not in a shady area, and that the solar panel faces the sun.
  4. Check the battery to ensure it is securely in contact with the terminals.

PRECAUTIONS

  1. The light is designed to work when the ambient light is low. If there are strong light sources nearby, the LED light may be very dim or not work at all.
  2. Although the battery has been charged by the manufacturer, its charge level may have dropped during shipping. Please charge it for a full day to achieve maximum performance.
  3. Keep the surface of the solar panel clean. Dusty panels will reduce charging efficiency.

HOW SOLAR LIGHT WORKS:
During the day, the solar panel converts solar power into the rechargeable battery. At night, the light turns on automatically using stored energy. The duration of illumination depends on your geographical location, weather conditions, and seasonal light availability.

INSTALLATION

  1. Gently twist the lamp roof.
  2. Remove the isolator tab.
  3. Pull out the ground stake.
  4. Connect the stake to the link tube.
  5. Connect the assembled pole to the lamp.
  6. Installation is now complete.

The solar panel must be installed in a well-lit location where it can receive maximum sunlight during daytime hours. Any cover that shades the panel will affect its ability to absorb sunlight, decreasing the brightness and duration of the LED lights. The lights and solar panel box are weather-resistant and should not be affected by exposure to rain, snow, or temperature changes.

PRODUCT OPERATION

This version of the Solar Powered Lights comes with an ON/OFF switch that allows you to manually turn on the lights whenever desired. Ensure the solar panel is pointed toward the sunlight. At least 6 hours of sunlight exposure is required for optimal illumination. The lights can illuminate for 6-7 hours if the solar panel is charged in optimal lighting conditions. While the solar panel will continue to collect energy on cloudy, rainy, or snowy days, the ability to accumulate energy and the duration of illumination will be reduced. For example, a bright cloudy day can provide a minimum of 3-4 hours of illumination, while a rainy or snowy day can only provide up to 1-2 hours of illumination.
IMPORTANT NOTES:
These solar lights use water-resistant and corrosion-resistant ABS technologies. The IP44 waterproof rating allows them to work well under various weather conditions, including rain, snow, frost, and sleet, but they do not offer complete protection from these conditions. You can place the lights outdoors in the rain, but do not submerge them underwater. The panel must be in a dark or dim environment to turn on the lights. The light will turn on automatically when the ambient brightness is less than 10 lux. If you want to turn it on in a brighter environment, simply cover the solar panel after it is charged.

INSTRUCTIONS FOR RECYCLING AND DISPOSAL

  • This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage to the environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If you want to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling.
  • A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals