LUXRITE LR25445, LR25446 2 inch Push and Lock Regressed Trimless Spotlight Owner’s Manual
- September 25, 2024
- LUXRITE
Table of Contents
LR25445, LR25446 2 inch Push and Lock Regressed Trimless Spotlight
Product Information:
Specifications:
- Dimensions: 3.66 inches x 4.72 inches x 4.72 inches
- Manufacturer Contact: 732-882-1500
- Website: luxrite.com
Product Usage Instructions:
Safety Precautions:
Before installing the fixtures, read all instructions carefully
and keep them for future reference.
For safety reasons, ensure that the fixture is wired in
compliance with local electrical codes and ordinances. All
electrical work should be carried out by a qualified
electrician.
Make sure to turn off the power from the electrical panel before
starting the installation or performing any maintenance. This
fixture is suitable for indoor installation only.
Do not mix different sizes and styles of dimmable RO warm
fixtures on the same dimmer switch, as not all fixtures will
exhibit the same color temperatures at the same dimming level.
Tools Required:
Ensure you have the following tools for installation: saw,
measuring tape, and electrical wiring materials suitable for the
application.
Installation Instructions:
-
Prepare the installation area by ensuring it is clean and free
from any obstructions. -
Follow the provided dimensions to place the fixture
correctly. -
Use the specified electrical wiring materials to connect the
fixture securely. -
Once wired, test the fixture by turning on the power to ensure
proper functionality.
Frequently Asked Questions (FAQ):
Q: Can I install this fixture outdoors?
A: No, this fixture is designed for indoor use only.
Q: Can I use different types of dimmable fixtures on the same
dimmer switch?
A: It is recommended not to mix different sizes and styles of
dimmable fixtures on the same dimmer switch to maintain consistent
color temperatures.
2″ PUSH AND LOCK REGRESSED TRIMLESS SPOTLIGHT 5CCT SELECT LR25445, LR25446
IMPORTANT: READ ALL INSTRUCTIONS BEFORE INSTALLING FIXTURES. KEEP FOR FUTURE
REFERENCE.
SAFETY: FOR YOUR SAFETY, THIS FIXTURE MUST BE WIRED IN ACCORDANCE TO LOCAL
ELECTRICAL CODES AND ORDINANCES. ALL WORK SHOULD BE DONE BY A QUALIFIED
ELECTRICIAN.
WARNING: MAKE SURE POWER IS OFF FROM THE ELECTRICAL PANEL BEFORE STARTING
INSTALLATION OR ATTEMPTING ANY MAINTENANCE. INDOOR INSTALLATION ONLY. DO NOT
CO-MINGLE DIFFERENT SIZES AND STYLES OF DIM RO WARM FIXTURES ON THE SAME
DIMMER, NOT ALL FIXTURES WILL EXHIBIT THE SAME CORRELATED COLOR TEMPERATURES
AT THE SAME DIMMING LEVEL.
TOOLS REQUIRED: SAW, MEASURING TAPE, ELECTRICAL WIRING (USE TAPE AND GAUGE
SUITABLE FOR APPLICATION TO CONNECT THE FIXTURES.
INSTRUCTIONS
3.66″
4.72″ X 4.72″
CUTOUT Ø3″
luxrite.com
1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>