LUXRITE LR25440 LED Trimless Spotlight Instruction Manual

LUXRITE LR25440 LED Trimless Spotlight

2″ TRIMLESS RECESSED DOWNLIGHT – 5CCT SELECT LR25440

IMPORTANT:

• READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
• The fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN
• ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
• TO PREVENT ELECTRICAL SHOCK, POWER SHOULD BE TURNED OFF AT THE FUSE BOX BEFORE INSTALLATION.

SAFETY WARNINGS

READ ALL PRODUCT LABELS AND DIRECTIONS

• WARNING : RISK OF FIRE OR ELECTRIC SHOCK. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire. – Installation should be performed only by a qualified electrician in accordance with the National Electrical Code and relevant local codes. Do no make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
• WARNING. – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• INSTALLATION SHOULD ONLY BE PERFORMED AFTER POWER TO THE FIXTURE HAS BEEN DISCONNECTED.
• These instructions shall be included on an information sheet packaged with each unit.
• This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any  interference received, including interference that may cause undesired operation.

BOX CONTENTS

DIMENSIONS

2″ TRIMLESS RECESSED DOWNLIGHT – 5CCT SELECT LR25440

1.  Turn power OFF from the electrical panel before installation.
2. Cut ceiling opening to recommended dimension according to the product data sheet. FIG. 1
3.  Place the mounting frame onto the ceiling. Fasten to ceiling with screws. FIG. 2
4.  Patch over the mounting frame with stucco or plaster and paing per ceiling color and let it dry. FIG. 3
5. Connect the power supply to the wire driver box, white-white, black-black, green-green/ground. Place the driver box into the ceiling and connect the fixture to driver box. FIG. 4
6.  Insert the fixture in the mounting frame and twist, making sure the lugs engage fully in the latching slots. FIG. 5
7.  Restore the power supply. FIG. 6

NOTE: These instructions do not cover all details or variations in equipment nor do the provide for every possible solution during installation, operation or maintenance.
732-882-1500
luxrite.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>