Thermaltake Versa H18 Window Micro Case User Manual

Thermaltake Versa H18 Window Micro Case User Manual

Specification

Accessory

Warning and Notice

Warning!!

– Height limit for the CPU heatsink: The height limit for the CPU heatsink is 155 mm (6.1 inches).
– Length limit for the VGA (graphics card):
The length limit for the VGA (graphics card) is 350 mm (13.8 inches)

Side Panel Disassembly

Remove the screws on the back of the chassis, and open the side panel.

PSU Installation

Place the power supply in proper location andsecure it with screws.

Motherboard Installation

1. Lay down the chassis.
2. Install the motherboard in proper location and secure it with screws.

3.5” & 2.5″ HDD Installation

Insert the HDD and tighten it with the screws.

PCI Slot Usage

1. Loosen the screws with a screwdriver.
2.  Install the PCI card in proper location and secure it with screws.

Radiator Installation

Air Cooling Installation

Leads Installation

Leads Installation Guide

Case LED Connection / On the front of the case, you can find some LEDs and switch leads. Please consult your user manual of your motherboard manufacturer, then connect these leads to the panel header on the motherboard. USB 2.0 Connection / Please consult your motherboard manual to find out the section of “USB connection”. USB 3.0 connection /

1. Make sure your motherboard supports USB 3.0 connection.
2. Connect the USB 3.0 cable to the available USB 3.0 port on your computer. Audio Connection / Please refer to the following illustration of Audio connector and your motherboard user manual.
   Please select the motherboard which used AC’97 or HD Audio(Azalia),(be aware of that your audio supports AC’97 or HD Audio (Azalia)) or it will damage your device.

Thermaltake Power Supply Series (Optional)

As today’s technology updates rapidly, consumers are always requesting for higher and higher PC performance, which also increases loads to power supplies. Therefore, selecting a suitable and reliable
power supply becomes a necessary lesson for all PC users.

Why Choose Thermaltake Power Supply?

Quality From Within
Every power supply units from Thermaltake should pass a very strict quality control before sent to customers, including BIT(Burn-in-test) for over 8 continuous hour in a 45℃ room to test if a unit can run normally under usual scene, and Hipot test to ensure the power supply unit can survive and protect both users and their systems when the voltage volume surges.

Less is more

In order to prevent wasted energy, all of Thermaltake’s products should have at least 80% of transforming efficiency, and we’re also one of the manufacturers that have the most 80 PLUS
certificates. Because Thermaltake knows how to save for the earth and customers; we know what makes less to be more.

Being Supportive By All Means

A product with better quality can have longer life and working hours but less pollution. Thermaltake obeys and respects all environmental clauses in all countries and make sure all of our products are both user and environmental- friendly. Therefore we show our supports by giving 2 to7-year warranties, which is not only a quality commitment to the users, but also love to this planet by reducing resources and wastes.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>