LA CROSSE TECHNOLOGY C86224 Alarm Clock Charging Station User Guide

: June 3, 2024
: LA CROSSE TECHNOLOGY

LA CROSSE TECHNOLOGY C86224 Alarm Clock Charging Station

Alarm Clock Charging Station with 2 USB Charging Ports

Buttons (on top)

C86224 Alarm Clock Charging Station Buttons

LCD Features

Time (manual set)
Low Battery Icon
Alarm Icon (M-F)
Weekday, Nap duration, or Snooze duration
Month/Date
Indoor Temperature
Indoor Humidity
USB 1 Charge Indicator
USB 2 Charge Indicator
USB 1 Charge Port 1 Amp
11 USB 2 Charge Port 2 Amp

Initial Setup

Insert the 5.0 volt power cable into the outlet, then into the clock.
(Optional), Insert 2 AAA batteries (not included) into the clock.
Set language, time, calendar, temperature unit and snooze duration.

Settings

Hold the SET button until the display changes to enter time set mode.
Press and release the +/- buttons to adjust the values.
Press and release the SET button to confirm adjustments and move to the next item.
Press the SNZ/LIGHT button at any time to exit. Settings Menu Order:

Language (English or Spanish)
Beep ON/OFF
Hour
Minutes
Year
Month
Date
Fahrenheit/Celsius
Snooze duration (5 minutes-120 minutes)

Backlight

When operating with the power cable, the backlight is adjustable: HI-LOW-OFF.
Press and release the SNZ/LIGHT button to adjust the backlight.
When operating on batteries only, the backlight will come on briefly when the SNZ/LIGHT button is pressed.

Nap Feature

Sometimes, we just want a quick nap without having to set a new alarm. Set the nap duration one time, then, a simple press of the NAP button starts the nap countdown.

Set Nap Duration:

Hold the NAP button for 3 seconds. NAP and the duration will show (default is 10 minutes).
Use the +/- buttons to select a nap duration (up to 120 minutes).
Press and release the NAP button to confirm and start nap count down to zero.

Press the SNZ/LIGHT button at any time to exit. Ready for a Nap? Press the NAP button once, and the clock will wake you at the preselected time.

From normal time display, press the NAP button once to start the nap feature for the preset time. NAP will show with the preset duration.
Minutes and seconds will countdown.
When the alarm sounds NAP and 0m will flash. The alarm will sound for two minutes and then stop if no buttons are pressed.
Press any button except SNZ/LIGHT, at any time to exit nap mode

USB Charging Ports

USB Output:

Charge devices that self-regulate.
Do not charge multiple devices from the same USB port.
For Tablets and other high power devices, use the USB port on the right (2 Amp).
Must operate clock with power cable to charge other devices.
Plug your device into one of the USB ports on the front of the clock.
The clock will show HELLO for 3 seconds.
The lightning bolt will flash while charging.
When no device is connected, no battery will show.
As your device becomes full and less current is drawn, solid battery icon may show, before the charge is complete.

Note: The FULL icon will show when full. After charging, the clock will provide a trickle charge and show the charging icon. Your device may not show fully charged.

Included USB to Micro USB or Lightning Cable

The included USB cord offers a Micro USB connection or a Lightning connection on the same cord.
Use your own charge cord or the included cord to charge your device.
Place your cord in the handy hook on the back of the clock.

Cable Hooks

On the back of the clock there are two cable hooks to secure your charging cables.
Simply slide your cable into the hook and the end of your cable will be easy to find every time.

Time Alarm

Press and release the ALARM button to view alarm time.
With alarm time showing, hold the ALARM button for 3 seconds to enter alarm settings.
Set the time then select alarm type: (Single alarm, Mon-Fri alarm, or Weekend alarm)
Setting and activating the alarm are separate functions.

Alarm Type (choose the type for each alarm):

Daily/Single-Will alarm at the same time every day when active.
Mon-Fri-Will only alarm Monday through Friday when active.
Weekend- Will only alarm Saturday and Sunday when active.

Set Alarm:

Press and release the ALARM button to view alarm time.
With alarm time showing, hold the ALARM button for 3 seconds to enter alarm time set mode.
Press the +/- buttons to adjust the alarm hour.
Press the ALARM button to confirm and move to the minutes.
Press the +/- buttons to adjust the alarm minutes.
Press the ALARM button to confirm and move to alarm type.
Use the +/– to select SINGLE, MON-FRI or WEEKEND alarm.
Press the ALARM button to confirm and exit.

Note: This is a crescendo alarm. It will sound for two minutes then shut offcompletely if no buttons are pressed.
Alarm Type Indicator:

Daily/Single: Clock icon only
Mon-Fri: Clock icon with 5 lines below
Weekend: Clock icon with 2 lines below

Daily / Single

Mon-Fri

**Weekend

**

Activate/Deactivate Alarm

When you finish settings, the alarm is active.
From the normal time display, press and release the ALARM button to view alarm time.
Press and release the ALARM button to deactivate or to activate the alarm.
When active the alarm clock icon will show.
The clock icon will not show if the alarm is not active.

Snooze

When the alarm sounds, press the SNZ/LIGHT button. The alarm will be silent for the preselected snooze duration.
SNOOZE – duration will show, and the snooze time will count down.
When alarm sounds again, the SNOOZE – 0 will flash.

Low Battery Icon

The low battery icon will appear between the hour and minutes.
This icon indicates it is time to replace the batteries.

Specifications

Temperature Range: 32 °F to 122°F (0°C to 50°C)
Humidity Range: 10%RH to 99%RH
Power: 5.0V AC6: HX36-0503500AU Optional-2-AAA, IEC, LR3 batteries (not included)
USB Output: 1 Amp and 2 Amp
Battery Life: Battery life is over 24 months with reputable batteries
Dimensions: 3.74” W x 2.40” D x 5.24” H (95 x 61 x 133 mm)

Warranty

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product, relating to manufacturing defects in materials and workmanship.

Warranty:
www.lacrossetechnology.com/pages/warranty| La Crosse Technology, Ltd 2830 S. 26th Street La Crosse, WI 54601
---|---
Patents:
www.lacrossetechnology.com/pages/patents

Care & Maintenance

Do not mix old and new batteries.
Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries.
Always purchase the correct size and grade of battery most suitable for intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed with correct polarity (+ and -).
Remove batteries from equipment when it is not used for extended period.
Promptly remove expired batteries.

Warning
CA WARNING:
This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm For more information go to:www.P65Warnings.ca.gov

Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

Having Trouble ? We’re here to help.

If you need additional assistance, contact our friendly customer support team
Online: bit.ly/contact_techsupport
Phone Number: 1.608.782.1610
Representatives available Monday-Friday, 8:00am to 6:00pm CST

Stay in touch

Ask questions, watch set up videos, and provide feedback on our social media outlets. Follow La Crosse Technology on Youtube, Twitter, Facebook & Instagram.