insportline 27366 Electric Scooter Stardust User Manual

: September 24, 2024
: insportline

Table of Contents

27366 Electric Scooter Stardust
Specifications:
Product Usage Instructions:
Brakes:
Left Handle:
Right Handle:
Accelerating:
Side Stand:
Main Switch / Fuse:
Display:
Tires:
- Frequently Asked Questions (FAQ):
Q: How do I activate/deactivate cruise control?
Q: What should I do if the side stand is lowered?
Q: How do I check tire pressure?

27366 Electric Scooter Stardust

“`html

Specifications:

Dimensions: 1671 x 710 x 1091 mm
Wheelbase: 1245 mm
Clearance height: 125 mm
Weight: 61 kg
Load capacity: 160 kg
Brake type: Disc
Brake control: Lever
Rim: Aluminum
Wheel size:
- Front: 80/70-10
- Rear: 80/70-10
Tire pressure: Front / back – 280 kPa / 280 kPa
Voltage: 48 V
Tension: 13 N.m.

Product Usage Instructions:

Brakes:

The front brake is controlled by the right lever, and the rear
brake is controlled by the left lever.

Left Handle:

1. Press to switch between low beam and high beam.

2. Activate right turn signal.

3. Activate left turn signal.

4. Sound the horn.

Right Handle:

5. Activate warning light.

6. Control light switch.

7. Activate/deactivate cruise control by pressing the button
while driving.

8. Open storage space under the seat by pressing twice.

Accelerating:

Turn the handle towards you (counter-clockwise) to start
accelerating gradually, keeping speed under control.

Side Stand:

Raise the side stand on the left side before riding to enable
engine start and turn off parking mode.

Main Switch / Fuse:

The control unit manages acceleration and deceleration; engine
stops if damaged.

Display:

The display shows various information including speed mode,
battery status, signals, errors, and more for a safe riding
experience.

Tires:

Use tubeless wheels with proper tire pressure maintenance and
cleaning to ensure even wear and optimal riding conditions.

Frequently Asked Questions (FAQ):

Q: How do I activate/deactivate cruise control?

A: Press the button on the right handle while driving to
activate or deactivate cruise control.

Q: What should I do if the side stand is lowered?

A: Raise the side stand on the left side to enable engine start
and turn off parking mode before riding.

Q: How do I check tire pressure?

A: Check tire pressure when cold using a pressure gauge to
ensure optimal performance and safety.

“`

USER MANUAL EN
IN 27366, 27370 Electric Scooter Stardust 25, Electric Scooter Stardust 45

CONTENTS
SAFETY INSTRUCTIONS……………………………………………………………………………………………………….. 3 DESCRIPTION ………………………………………………………………………………………………………………………. 4 BATTERY AND BATTERY CHARGING ……………………………………………………………………………………. 6 SPECIFICATIONS………………………………………………………………………………………………………………….. 7 USE ……………………………………………………………………………………………………………………………………… 7
LEFT HANDLE……………………………………………………………………………………………………………………. 8 RIGHT HANDLE …………………………………………………………………………………………………………………. 8 SIDE STAND………………………………………………………………………………………………………………………. 9 MAIN SWITCH / FUSE ………………………………………………………………………………………………………… 9 DISPLAY ………………………………………………………………………………………………………………………….. 10 BRAKES…………………………………………………………………………………………………………………………… 11 MAINTENANCE …………………………………………………………………………………………………………………… 12 FIRST INSCPECTION SINCE PURCHASE ………………………………………………………………………….. 12 TROUBLESHOOTING ………………………………………………………………………………………………………….. 14 ENVIRONMENT PROTECTION …………………………………………………………………………………………….. 14 TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS …………………………………………. 14
2

SevenSport s.r.o. reserves the right to make any changes and improvements to its product without prior notice. Visit our website www.insportline.eu where you will find the latest version of the manual.
SAFETY INSTRUCTIONS
· Please read the manual before use and keep it for future reference. · Always wear personal protective equipment: helmet, eye protection, gloves, long- sleeved
jacket, pants and ankle boots. · Do not wear loose clothing that can get caught. · Follow all instructions and information on warning labels. Do not remove warning labels. · Before riding, check the scooter for any damage or wear. · Follow local laws and regulations while driving. · Before riding, each user must become familiar with the steering and control of the scooter. · Always control your speed, do not accelerate or suddenly slow down. · Riding on damp, wet or greasy roads impairs the vehicle’s controllability and lengthens its
braking distance. · Do not transport animals or other people on the scooter. · Do not carry excessive baggage. · Do not hang other objects on the handlebars, as this will impair the controllability of the
vehicle. · Do not make unappreciated modifications and repairs. · Do not attach another vehicle or cart to the scooter. · Brake gradually, sudden braking can cause loss of vehicle control. · Before riding, check the condition of the brakes, lights, battery and tires. · Do not leave the scooter running unattended. · Secure the parked scooter against misuse. · After braking, do not touch the brakes, they are hot, there is a risk of burns. · Do not park the scooter in places where there are flammable or explosive substances. · Improper use or misuse can result in serious injury, death, or property damage. · Do not accelerate downhill. The braking distance increases and there is a risk of losing
control. · Avoid dangerous maneuvers or steering with one hand when driving. · Keep both feet on the step when driving. · Regularly check the wear of the product. Replace worn parts immediately. · Do not use a damaged product. Do not use it even if you find sharp edges on it. · Stay focused while driving. Never drive after consuming alcohol or under the influence of
intoxicants. Do not transport anything on the device. · Always keep your speed under control and fully concentrate on riding. Maintain good visibility.
Do not exceed speed or weight limits. · In the event of an accident, do not leave and wait for professional help. · Other activities (talking on the phone, listening to music) can significantly reduce your attention
while driving. Don’t get distracted.
3

· The Stardust scooter has IP 5 protection, can withstand riding in the rain and washing with water. Do not wash with a high-pressure stream of water to avoid damaging some parts.
· 27366 Electric scooter Stardust 25 – no driving license required, max. speed up to 25 km/h
· 27370 Electric scooter Stardust 45 – driver’s license required at least group AM (from 15 years old), max. speed up to 45 km/h
VEHICLE IDENTIFICATION

1

VIN

2

Name

3

Motor

DESCRIPTION

1. Rear view mirrors 2. Display 3. VIN 4. Charging port 5. Saddle 6. Rear light 7. Engine 8. Name 9. Side stand 10. Front wheel 11. Front light

4

DIAGRAM
5

BATTERY AND BATTERY CHARGING
The scooter is equipped with an integrated lithium-ion battery. Range varies depending on speed, user weight, driving style and surrounding driving conditions. 6-month battery warranty we guarantee that battery’s nominal capacity does not fall below 70% of its total capacity within 6 months of the product’s sale. For proper operation and safe use of the battery, follow the instructions in the manual. Stop using the battery immediately if the battery is damaged, leaks liquid or you smell abnormal odor. SAFETY INSTRUCTIONS
· Do not immerse the battery in water and protect against excessive moisture.
· Keep the battery away from open fire, flames and heat sources.
· Do not expose to sunlight or temperatures 60 °C for a long time. · Protect against impacts, falls, strikes or mechanical damage.
· If the battery emits smoke, leaks liquid, or becomes excessively hot, immediately disconnect the battery from external power and move it to a safe place. Wait until the battery stops smoking or leaking, have a suitable fire extinguisher ready.
· If the battery is deformed, bulging or visibly damaged in any way, immediately disconnect the battery and stop using it.
· If the battery catches fire, immediately extinguish the battery with a powder fire extinguisher or a sufficient amount of water. Always keep your own personal safety and the safety of others in mind.
· Take a damaged or worn battery to a collection point or recycle it according to the applicable regulations and laws.
MAINTENANCE
· Do not repair or disassemble the battery.
· Before first use, we recommend charging the battery to more than 80% capacity.
· Do not let the battery discharge completely, we recommend recharging the battery at 20% capacity.
· If the battery is not in use, recharge the battery at least once a month.
· Do not connect other external devices to the battery.
· At higher load, the battery may heat up.
· Use only the original charger to charge the battery. CHARGING Turn off the scooter. Open the protective cover and check the charging port. Plug the charger into the charging port and then into a 220 V socket (source). After charging, first disconnect the battery from the source and then from the scooter. Charge the battery under constant supervision in a clean and well- ventilated room. There must be no oil, explosive gases, moisture, water or excessive heat (sunlight) in the room. After charging the battery, it is necessary to disconnect the charger. Otherwise, the charger may overheat or you may reduce the battery capacity. If you notice any anomalies or malfunctions during charging, immediately disconnect the charger from the source. Make sure the scooter is turned off before charging. Do not transport the charger in the trunk of the scooter.
· When the battery is charging, the charger indicator will flash red.
· When the battery is charged, the indicator will be green.
· Battery charging time is approximately 12 hours.
6

SPECIFICATIONS

L x W x H Wheelbase Clearance height Weight Load capacity Brake type Brake control Rim
Wheel size
Wheel size Tire pressure
Voltage Tension

1671 x 710 x 1091 mm 1245 mm 125 mm 61 kg 160 kg Disc Lever Aluminum
Front: 80/70-10
Rear: 80/70-10
280/280 kPa 48 V 13 N.m.

Revolution Engine model Battery type Battery capacity Battery voltage Undervoltage protection Overcurrent protection Charger Max. speed IN 27366 Max. speed IN 27370 Riding range IN 27366 Riding range IN 27370 Incline Power consumption Charging time

900 W (640/min) 10ZW4864313YA Lithium-ion 30 Ah 48 V
42±1A
30±1A AC 220V/50 Hz 25 km/h 45 km/h 95 km 75 km 12° 30 Wh/km 6 hours

USE
BRAKES
The front brake is controlled by the right lever. The rear brake is controlled by the left lever.

7

The control unit controls the acceleration and deceleration of the scooter. If it is damaged, the engine will stop working.

LEFT HANDLE

Press to switch between low beam and low beam.

Right turn signal 2.
Left turn signal

Horn

Hold to turn the dashboard lights on/off 4. Press to change the color of the dashboard light

RIGHT HANDLE

Warning light

Light switch

Press to turn off parking mode.

If you press the button while

driving, you will activate /

deactivate the cruise control.

Press twice to open the

storage space under the

seat

Quick boot push the button to the left to turn on the function

By turning the handle towards you (counter-clockwise) you start to accelerate. Always accelerate gradually, keep your speed under control.
8

SIDE STAND
There is a side stand on the left side of the scooter. If the stand is lowered, the display will show “P” and the engine cannot be started. Before riding, it is necessary to raise the stand and turn off the “P” parking mode.
MAIN SWITCH / FUSE
If a fault or short circuit occurs, the main switch will automatically turn off. The switch is located under the seat. In case of any electrical circuit or battery failure, immediately turn off the main power switch. ON switched on OFF switched off
9

DISPLAY

1 Mile 2 Kilometers 3 Speed mode 4 Time 5 Battery status 6 Left turn signal 7 Warning lights 8 Bluetooth 9 Control unit error 10 Handlebar error
Cruise control
High beam
Low beam

11 Ready to ride 12 Cruise control 13 GPS 14 4G 15 Right turn signal 16 Total distance 17 High beam 18 Low battery 19 Warning 20 Engine error
Control unit error
Engine error
Low battery
10

Right turn signal

Handlebar error

Left turn signal

Brake error

The scooter is ready to ride

Battery status

TIRES

The scooter only uses tubeless wheels.

Dimensions

Front Rear

80/70-10 80/70-10

Pressure

Front / back

280 kPa / 280 kPa

Tire depth

Front / back

0,8 mm ~ 1 mm / 0,8 mm ~ 1 mm

Improper pressure, excessive load or incorrect riding can result in uneven wheels.

Unevenly worn wheels can worsen the riding conditions of the scooter.

Check tire pressure when cold.

Regularly clean the wheels of dirt and avoid long-term parking in direct sunlight.

If you plan not to use the scooter for an extended period of time, place the scooter on the main stand. This will prevent tire deformation.

If the temperature drops below 0 °C, we recommend parking the scooter indoors.

BRAKES

Keep the brakes clean, the brakes must not be clogged or greasy. If necessary, clean or degrease the brakes with brake cleaner.

Disc
Check the disc for wear and condition regularly. the disc must not be damaged or deformed. The minimum disc width is 3 mm.

Pads The minimum width of the pads are 2.5 mm.

11

MAINTENANCE

Carry out maintenance and inspection after kilometers driven or months passed. If both are listed, whichever occurs first. Leave any repairs that require any modification or intervention to the service department. Modifications and repairs must be carried out by a professional and with the appropriate tools.

FIRST INSCPECTION SINCE PURCHASE

Part Electronics Electrical parts Fuses Brakes Discs Plates Liquid Brake hoses Wheels Brake cable Tire pressure Suspension Front and rear shock absorber Controls Bearings Other Memory error Moving parts Bolts and nuts After first inspection Part Electronics Electrical parts Fuses Cables Wheels
Tire condition
Tire pressure

Month
Month 12 6 12 12 24 12 24

After reached KM Activity

1000 1000

Check Check

1000 1000 1000 1000

Check Check Check Check, tighten

1000 1000

Check Check

1000

Seal check / oil leakage

1000

Check smooth movement

1000 1000 1000

Connect diagnostics Lubricate all moving parts Check the tightening

After reached KM Activity

10 000 5000 10 000

Check Check Check

10 000 20 000 10 000 20 000

Check Check Check Check

12

Wheel bearing
–

Brakes

12 Front / back
24

12 Discs
24

12 Pads
24

12 Liquid level
–

24 Brake hoses
12

Liquid

24

Suspension

–

Suspension system

–

Front and rear shock

12

absorber

24

Frame

–

Controls

12 Bearings
24

Other

12 Interface
24

12 Moving parts
48

12 Bolts, nuts
48

12 Hoses and sleeves
48

10 000 30 000
10 000 20 000 10 000 20 000 10 000 20 000 10 000 20 000 20 000 10 000
–
5000 10 000 15 000 10 000 20 000
30 000
10 000 20 000
10 000 20 000 10 000 30 000 10 000 30 000 10 000 30 000

Check Check
Check Check Check Check Check Check Check Check Check Check Replace
Check Check Check Seal check / oil leakage Seal check / oil leakage
Check
Check Check
Connect diagnostics Connect diagnostics Lubricate Lubricate Tighten Tighten Check Check

13

TROUBLESHOOTING

Unable to start

Ignition

Poor performance Weak light Horn

Engine Cables Switches
Fluorescent lights DC/DC Left switch Cables Horn

Low battery

Charge or replace the battery

Control unit error, Check the connections

poorly

connected or replace the control

control unit

unit

Bad wiring

Check, plug again

Engine overheating

Allow the engine to cool

Bad connection

Checks the wiring

Badly connected damaged switches

or

Check the wiring or condition of the switches

Damaged or incorrectly Check the condition

connected

and connections

No current

Check or replace

Damaged or incorrectly wired switch

Check or replace

Badly cables

connected Check or replace

Damaged horn

Check or replace

ENVIRONMENT PROTECTION
After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the local laws and environmentally friendly in the nearest scrapyard.
By proper disposal you will protect the environment and natural sources. Moreover, you can help protect human health. If you are not sure in correct disposing, ask local authorities to avoid law violation or sanctions.
Don’t put the batteries among house waste but hand them in to the recycling place.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated here under determine Warranty Coverage and Warranty Claim Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 89/2012 Coll. Civil Code, and Act No. 634/1992 Coll., Consumer Protection, as amended, also in cases that are not specified by these Warranty rules.
The seller is SEVEN SPORT s.r.o. with its registered office in Strakonická street 1151/2c, Prague 150 00, Company Registration Number: 26847264, registered in the Trade Register at Regional Court in Prague, Section C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not conclude and execute the Contract in order to run or promote his own trade or business activities.
“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the purpose of using the Goods or services for his own business activities. The Buyer conforms to the General Purchase Agreement and business conditions.
14

These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement made between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless otherwise specified in the Purchase Agreement, in the Amendment to this Contract or in another written agreement.
Warranty Conditions
Warranty Period
The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in the Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The legal warranty period provided to the Consumer is not affected.
By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a certain period of time, suitable for regular or contracted use, and that the Goods shall maintain its regular or contracted features.
Batteries
6-month battery warranty we guarantee that battery’s nominal capacity does not fall below 70% of its total capacity within 6 months of the product’s sale.
The Warranty does not cover defects resulting from (if applicable):
· User’s fault, i.e. product damage caused by unqualified repair work, improper assembly, insufficient insertion of seat post into frame, insufficient tightening of pedals and cranks
· Improper maintenance
· Mechanical damages
· Regular use (e.g. wearing out of rubber and plastic parts, moving mechanisms, joints, wear of brake pads/blocks, chain, tires, cassette/multi wheel etc.)
· Unavoidable event, natural disaster
· Adjustments made by unqualified person
· Improper maintenance, improper placement, damages caused by low or high temperature, water, inappropriate pressure, shocks, intentional changes in design or construction etc.
Warranty Claim Procedure
The Buyer is obliged to check the Goods delivered by the Seller immediately after taking the responsibility for the Goods and its damages, i.e. immediately after its delivery. The Buyer must check the Goods so that he discovers all the defects that can be discovered by such check.
When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase and validity of the claim by the Invoice or Bill of Delivery that includes the product’s serial number, or eventually by the documents without the serial number. If the Buyer does not prove the validity of the Warranty Claim by these documents, the Seller has the right to reject the Warranty Claim.
If the Buyer gives notice of a defect that is not covered by the Warranty (e.g. in the case that the Warranty Conditions were not fulfilled or in the case of reporting the defect by mistake etc.), the Seller is eligible to require a compensation for all the costs arising from the repair. The cost shall be calculated according to the valid price list of services and transport costs.
If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is not accepted. The Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim.
In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller, the Seller shall fix the reported defects by means of repair or by the exchange of the damaged part or product for a new one. Based on the agreement of the Buyer, the Seller has the right to exchange the defected Goods for a fully compatible Goods of the same or better technical characteristics. The Seller is entitled to choose the form of the Warranty Claim Procedures described in this paragraph.
The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods, unless a longer period has been agreed upon. The day when the repaired or exchanged Goods is handed over to the Buyer is considered to be the day of the Warranty Claim settlement. When the
15

Seller is not able to settle the Warranty Claim within the agreed period due to the specific nature of the Goods defect, he and the Buyer shall make an agreement about an alternative solution. In case such agreement is not made, the Seller is obliged to provide the Buyer with a financial compensation in the form of a refund.

CZ SEVEN SPORT s.r.o.

SK inSPORTline s.r.o.

Registered Office: Strakonická 1151/2c, Praha 5, 150 00, CR

Headquaters:

Dlnická 957, Vítkov, 749 01

Warranty & Service: Cermenská 486, Vítkov 749 01

CRN: VAT ID:

26847264 CZ26847264

Phone: E-mail:

+420 556 300 970 eshop@insportline.cz reklamace@insportline.cz servis@insportline.cz

Web:

www.inSPORTline.cz