BINZHOU PW30 Multi Functional Wireless Charging Case User Manual
- September 25, 2024
- BINZHOU
Table of Contents
BINZHOU PW30 Multi Functional Wireless Charging Case
FAQ
Q: What devices are compatible with wireless charging on the PW30?
A: The PW30 supports wireless charging for iPhone, Huawei, Xiaomi, Samsung phones, TWS earphones, I-Watch, and more.
Q: How do I know when the device is fully charged?
A: The LED indicators on the PW30 will show different patterns based on the charging status. Refer to the manual for specific indications.
Product Introduction
PW30 is a multifunctional wireless charging dock. Using TYPE-C 65W power supply and 15W.5W.3W wireless charging, it can simultaneously support various types of wireless charging phones, AriPods, and iWhacth. It can also power laptops, USB-A, and TYPE-C charging ports through the C-port, and can charge 5 devive simultaneously, reducing unnecessary desktop usage and improving space efficiency. 60 ° foldable bracket design, precise magnetic suction function, supports iPhone magnetic suction magsafe protocol, making your work and life more convenient.
Hardware Spec Standard
Hardware specification
Solution Platform| IP6862
LED| Power indicator white, ambient light white
Size| 81mm*63mm
Bracket angle| ~55°
Net weight| ~313g
Function operation definition
Power on
| Insert a 65W charging wire into the TYPE-C IN port (input requires a DC
power supply greater than 60W)
---|---
Led on
| ****
Touch switch
IWatch Changing
| Press the side storage compartment to eject and pull it out, then press the storage compartment again to retract it
Wireless charging specification
Input power
| 20V/3.25A（＜50W，TYPE-C OUT no-output）
---|---
Out power
| ****
15W.5W.3W.TYPE-C 45W.USB-A 5W
Sensing distance
| 5mm（max）
Support equipment
| Wireless charging supports iPhone, Huawei, Xiaomi, Samsung phones, TWS earphones, I-Watch, etc. The C-port output supports high-power products such as tablets and laptops, while the A-port supports regular product charging
Foreign induction
| ****
Non wireless charging to receive metal items
Standby power| ＜0.7W
LED light indicator LED
Power on
| ****
The power light flashes 3times quickly
---|---
Scene LED
| ****
Touch to stay on, touch again to turn off
External charging
| The power light stays on for a long time, and the ambient light flashes 3 times (observe the status display on the dial when charging the watch)
Charging removal
| ****
The power light flashes quickly twice
Device charging
| ****
The ambient light flashes three times quickly
Foreign matter detection
| ****
The white light flashes rapidly until the foreign object is removed
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by the party
responsible or compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co‐located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>