Infinix GT 20 Pro Mobile Phone User Manual
- September 24, 2024
- Infinix
Table of Contents
Infinix GT 20 Pro Mobile Phone
Product Specifications
- Brand: Infinix
- Model: GT 20 Pro X6871
- Operating System: AndroidTM
- Display: OLED
- Main Camera: 7 MAIN CAMERA, 2M CAM GC02M3-C24Y0 B
- Front Camera: Included
- Storage: Main FPC, Ant Sub PCBA
- Battery: Polymer Battery
- Connectivity: NFC, USB
Product Usage Instructions
Know Your Phone
The phone features
- Front camera
- Volume + button
- Volume – button
- Power button
- NFC functionality
SIM Card Installation
- Power off your phone.
- Refer to the provided picture for SIM card installation.
Charging the Phone
To charge your phone
- Use the provided charger or connect it to a computer using the USB cable.
- Only use Infinix chargers and cables to prevent damage and warranty issues.
FCC Caution
This device complies with FCC regulations. Users must adhere to the following:
- Avoid causing harmful interference.
- Accept any received interference that may affect operation.
Frequently Asked Questions (FAQ)
Q: Can I use any charger to charge the phone?
A: It is recommended to use only Infinix chargers and cables to avoid damaging
the phone and voiding the warranty.
GT 20 Pro X6871 User Manual (C &F)1
Exploded diagram specification
| 1 | OLED | 2 | FC HEAT FILM |
|---|---|---|---|
| 3 | VC | 4 | MID FRAME |
| 5 | MAIN PCBA | 6 | UP SPK |
| 7 | MAIN CAMERA | 8 | 2M CAM GC02M3-C24Y0 A |
| 9 | 2M CAM GC02M3-C24Y0 B | 10 | FPCA FLASH LED |
| 11 | UP FRAME | 12 | THERMAL RADIATION FILM PCBA |
| 13 | SCREW M1.4*L3.5 | 14 | THERMAL RADIATION FILM F CAM |
| 15 | MB COP FOIL B | 16 | RM CAM PARCEL FOIL |
| 17 | LFX BTB FIXED STEEL | 18 | RUBBER 2M CAM |
| 19 | F CAM FRAME | 20 | BACK COVER |
| 21 | METAL DECO | 22 | NFC |
| 23 | GLASS CAMERA LENS | 24 | RF CABLE |
| 25 | MAIN FPC | 26 | LED MODULE |
| 27 | ANT SUB PCBA | 28 | HOMEMADE PCBA SUB |
| 29 | MOTOR LINEAR | 30 | FINGER MODULE |
| 31 | USB RUBBER | 32 | LCD FPC RUBBER |
| 33 | POLYMER BATTERY | 34 | SPK FRAME |
| 35 | SIM CARD HOLDER | 36 | THERMAL RADIATION FILM SPK |
| --- | --- | --- | --- |
| 37 | 2M CON FB | 38 | DECO FRAME |
| 39 | SCREW M1.2*L1.7 |
Know your phone
- Front camera
- Volume + button
- Volume – button
- Power button
- NFC
SIM card installation
- Power off your phone.
- Refer to the following picture for SIM card installation.
Charging the phone
You can charge your phone with a charger or by connecting it to a computer
using a USB cable (comes with the phone).
Use only Infinix chargers and cables. Other chargers or cables may damage the
phone and invalidate its warranty.
FCC Caution
Labeling requirements.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Information to user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the device.
Information to the user.
Note: This device has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and may radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or
television reception (able to be determined by turning the device off and on),
the user is encouraged to try to correct the interference by one or more of
the following measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver. -
Connect the device to an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This mobile phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. Device types: X6871 (FCC ID:
2AIZN-X6871) has also been tested against this SAR limit. The highest SAR
value reported under this standard during product certification for use at the
ear is 0.73 W/kg and when properly worn on the body is 0.68W/kg.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 1.0 cm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
For DTS patents, see http://patents.dts.com Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
Operating System: AndroidTM
Android is a trademark of Google LLC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>