Infinix HOT 40i Smartphone User Manual

Infinix HOT 40i Smartphone

Product Information

Specifications:

• Model: Infinix HOT 40i X6528
• Operating System: Android™ (Android is a trademark of Google LLC)
• Camera: Front Camera, Rear Camera 50M, Rear Flash Lens
• Processor: Main Board Copper D, Main Board Copper A, Main Board Copper B
• Storage: SIM Card Holder, Battery, Sub Board

Product Usage Instructions

Know your phone:
Identify the key components of your phone:

• Front camera
• Volume + key
• Volume – key
• Power key & side fingerprint sensor

SIM/SD card installation:

To install SIM/SD card:

1. Power off the mobile.
2. Refer to the provided picture for SIM/SD card installation guidance.

Charging the phone:
To charge your device:

• Use the provided INFINIX charger and cables.
• Avoid using other chargers or cables to prevent damage and warranty invalidation.

FCC Caution:
This device complies with FCC Rules:

• The device should not cause harmful interference.
• The device must accept any received interference.

Any unauthorized modifications may void the user’s authority to operate the equipment.

FAQs (Frequently Asked Questions)

• Q: Can I use any charger to charge the device?
  A: It is recommended to use only the provided INFINIX charger and cables to avoid damage and warranty issues.

• Q: How do I know if my SIM/SD card is installed correctly?
  A: Ensure you follow the provided picture guide for correct installation. If unsure, seek assistance from customer support.

HOT 40i
X6528 User Manual(V&Y&Bf)

Explosion diagram specification

Know your phone

1. Front camera
2. Volume + key
3. Volume – key
4. Power key & side fingerprint sensor

SIM/SD card installation

1. Power off mobile.
2. Refer to the following picture for SIM / SD card installation.

Charging the phone

• You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone).
• Use only INFINIX charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.

FCC Caution

Labelling requirements.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Information to user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.

Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:

• This mobile phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
• FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: X6528(FCC ID:2AIZN-X6528) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.24 W/kg and when properly worn on the body is 0.79 W/kg.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Infinix
For DTS patents, see http://patents.dts.com . Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. Operating System： AndroidTM
Android is a trademark of Google LLC.

References

• Patents - DTS
• Patents - DTS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>