Infinix X6516 Smart 7 HD Smartphone User Manual

Infinix X6516 Smart 7 HD Smartphone

Product Information

The X6516 SMART 7 HD is a mobile phone manufactured by Infinix Mobility Limited. It is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The phone operates on the AndroidTM operating system, trademarked by Google LLC. The device has SIM and SD card slots for storage and connectivity.

Product Usage

Turning On/Off the Device
To turn on the device, press and hold the power button until the display lights up. To turn off the device, press and hold the power button, then long press POWER OFF. To restart the device, press and hold the power button until the device vibrates.

SIM/SD Card Installation
Before installing or removing a SIM or SD card, power off the mobile device. To install a SIM card, use the provided SIM-eject tool to pop open the SIM tray. Insert the SIM card into the SIM card slot and then insert the SIM card slot back into place. Refer to the user manual for a picture of the SIM/SD card installation.

Safety Information
To ensure safe and accurate operation, read all safety information carefully before using the device. Avoid excessive sound pressure on the ear and headphones to prevent hearing loss. Use only compatible power adapters, chargers, or batteries to avoid damage to the device. Keep the device and battery away from excessive heat and direct sunlight. Do not dispose of them with normal household waste.

Disposal and Recycling Information
This device and all electrical accessories comply with applicable local laws for restricting the use of certain harmful substances in electrical and electronic equipment, such as EU REACH, RoHS, and Battery (if applicable) regulations. Improper use of the battery may result in fire, explosion, or other hazards. Clean the device with a dry, soft cloth.

Specific Absorption Rate (SAR) Certification
The device meets international guidelines for exposure to radio waves. The Specific Absorption Rate (SAR) for the head is 1.108 W/Kg at 0 cm and the body is 1.13 W/Kg at 0.5cm, both at 10g. The limit for both is 2.0 W/Kg at 10g.

Know your phone

1. Press and hold the power button until the display lights up to turn on the device.
2. To turn off the device, press and hold the power button, then long press “POWER OFF”.
3. To restart the device, press and hold the power button until the device vibrates.

SIM/SD card installation

1. Power off mobile.
2. To pop open the SIM tray, insert the provided SIM-eject tool into the hole beside the tray.
3. Insert the SIM card into the SIM card slot.
4. Insert the SIM card slot and find it in place.
5. Refer to the following picture for SIM/SD card installation.

Safety Information

To ensure safe and accurate operation and how to dispose of the device properly, please read all the safety information carefully before using your device.

Operation, Safety, Usage Errors and Maintenance Repair Rules

1. Please remind the front and back of the plug.

2. Use earbuds with care, as excessive sound pressure on the ear and headphones may cause hearing loss.

3. The use of an unrecognized or incompatible power adapter, charger, or battery may damage your device, shorten its life, or cause fire, explosion, or other hazards.

4. Adapter1: U100XEA
   Input: 100-240V ~50/60Hz 500mA Output: 5.0V 2.0A
   Adapter2: U100XKB
   Input :100-240V ~50/60Hz 400mA Output: 5.0V 2.0A

5. EUT Temperature:-10℃～+55℃(Standalone). 5℃～+40℃(with adapter).

6. Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.

7. Back cover can’t be removed.

8. Do not replace, disassemble, modify, mechanically crush or cut the battery, as it may cause battery leakage, overheating, explosion or fire.

9. Observe the local laws and regulations when using the device. To reduce the risk of an accident, do not use your wireless device while driving.

10. Only use the device according to the instructions supplied with the device immediately before flying or in boarding. The use of wireless devices in an aircraft may cause interference in wireless networks, may be dangerous to the operation of the aircraft or may be illegal.

11. To avoid damage to parts or internal circuits of your device, do not use the device in dusty, smoky, damp, or dirty environments, or near magnetic fields.

12. When charging the device, make sure that the power adapter is plugged into a plug close to the devices and is easily accessible.

13. Unplug the charger from the electrical outlet and the device when not in use.

14. Do not use, store, or transport the device in locations where flammable materials or explosives are stored (such as a gas station, oil reservoir, or chemical plant). Using your device in these environments increases the risk of explosion or fire.

15. Dispose of this device, battery, and accessories in accordance with local regulations. Should not be disposed of with normal household waste. Improper use of the battery may result in fire, explosion or other hazards.

16. You can clean your device with a dry, soft cloth.

Disposal and recycling information

The crossed-out wheeled bin symbol, marked on your product, its battery, its booklet, or its packaging, means that it must be taken to different waste collection points at the end of its working life; they must not be disposed of with the normal waste stream of household waste. It is the user’s responsibility to dispose of a designated collection point of the equipment or waste electrical and electronic equipment (WEEE) and batteries using separate recycling services according to local laws. The proper collection and recycling of your equipment helps to ensure that the EEE waste is recycled so that valuable materials are kept and to protect human health and the environment; Improper handling, accidental breakage, damage, and / or improper recycling of the end of life may be harmful to health and the environment. For more information on where and how to dispose of your EEE waste, please contact your local authorities, dealer or your household waste disposal service.

Reduction of harmful substances

This device and all electrical accessories comply with applicable local laws for restricting the use of certain harmful substances in electrical and electronic equipment, such as EU REACH, RoHS and Battery (if applicable) regulations.

Specific Absorption Rate (SAR) Certification
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVESFor DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

Operating System：AndroidTM
Android is a trademark of Google LLC.

Declaration of conformity

We: INFINIX MOBILITY LIMITED (Name of the manufacturer)
FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25
SHAN MEI STREET POTAN NT HONGKONG (Address) declare under our own responsibility that the product
product name : Mobile phone Model No.:X6516
Trademark: Infinix (Including product name, model No. descriptions,versions and supplementary characteristics) to which this declaration refers conforms With the relevant standards or Other standardising documents

Article 3.1a Health:
EN 50360:2017
EN 50566:2017
EN 62479:2010

Article 3.1a Electrical Safety:
EN IEC

Article 3.1b:
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.4 (2020-09)
ETSI EN 301 489-19 V2.2.1 (2022-09)
ETSI EN 301 489-52 Vl.2.1 (2021-11)
EN 55032:2015 All:2020
EN 55035:2017 All:2020
EN IEC 61000-3-2:2019

Article 3.2:
ETSI EN 301 511 V12.5.1 (2017-03)
ETSI EN 301 908-1 V15.1.1 (2021-09)
ETSI EN 301 908-2 V13.1.1 (2020-06)
ETSI EN 301 908-13 V13.2.1 (2022-02)
ETSI EN 300 328\./2.2.2 (20190)
ETSI EN 303 345-1 Vl.l.l (2019-06)
ETSI EN 303 345-3 Vl.l.l (2021-06)
ETSI EN 303 413 Vl.2.1 (202104)

The following accessories and components, including software, allow the Object Of the declaration described above to operate as intended and in conformity with this EIJ declaration of conformity:

• Software Version: X6516•SE668S
• Hardware Version: VI.O
• Adapterl: UIOOXEA
• Input:100-240V •50/60Hz 500mA
• Output: 5.OVX2.OA
• Adapter2: IJIOOXKB
• Input:100-240V 400mA
• Output: 5.0VX2.OA
• Rechargeable Li-ion polymer
• Battery: BL-49NX
• Rated Voltage: 3.85V
• Rated Capacity: 4900mAh/18.86Wh
• Typical capacity: 5000mAh/19.25Wh
• Limited Charge Voltage: 4.4V

1. Notified body involved: TOV Rheinland LGA products GmbH, 0197,
2. .Performed conformity assessment according to Directive Annex Ill Module B of the 2014/53/ElJ Radio Equipment Directive (RED) and issued the EU-type examination certificate.
3. This declaration of conformity is issued under the sole responsibility Of the manufacturer.
4. The Object Of the declaration described above is in conformity with the relevant Union harmonization

legislation:Directive 2014/53/EU (RED) RoHS Directive2011/65/EU With amendment 2015/863 Organotin compounds – REACH EC No. annex xvii REACH EC No – WHC (Candidate List of substances of very high concern) Other union harmonization legislation where applicable. Place and date of issue (of this DOC): Shenzhen/2023-2-7
Nengyong.Wu/ Manager
(Name/Title) (Name and signature of person responsible)
www.infinixmobility.com

References

• Patents - DTS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>