PHILIPS JS5610 Car Jump Starter User Manual

September 23, 2024
Philips

PHILIPS JS5610 Car Jump Starter

Car Jump Starter

JS5610
JS5710

User Manual

JS5610/5710 model name and serial number are printed on the product label

Warranty and service

Lumileds is the warrantor of this product. The limited warranty applies, provided that:

  • The product is within the warranty period, which is 1 year from the date of purchase;
  • The product is used properly and in line with its intended purpose;
  • The product is handled in accordance with its operating instructions;
  • The original purchase receipt is presented with the product.

The Lumileds warranty excludes or does not apply, if:

  • The proof-of-purchase document has been altered jn any way, or is made illegible;
  • The model number, serial number, or production date code on the product have been altered, removed, or made illegible;
  • The product has been dismantled, repaired, or modified by an unauthorized service provider or person;
  • The product does not function properly because it was not originally designed, manufactured or approved for use in the country where you used the product;
  • The defect is caused by abuse of the product, or by environmental conditions that do not conform with guidance contained within this user manual (including but not limited to lightning, abnormal voltage, fire, natural disaster, transportation, or water), or by normal wear and tear,

Important: please read
Please only use the items and accessories supplied in this package to install the device. Please avoid high temperatures and direct sunlight exposure when operating this product outdoors.

For more information and assistance, or for any problem with the product, please visit the Philips website at www.philips.com/automotive, or contact the retail outlet where you purchased the product.

Alternatively, you can also call the customer service hotline:

  • For China : 400 690 8826
  • For Japan: 0570-080-123
  • For Korea : +82-31-620-1600
  • For Taiwan : 0800 700 168

Manufacturer : Lumileds (Shanghai) Management Co., Ltd. No. 19-20, Lane 299, Wenshui Road, Jian’An District, Shanghai Postal code: 200072

Product Overvie

  1. LED screen
  2. USB-C In/out port(PDl00W Max)
  3. USB1 out port (QC3.0, SV /9V/12V)
  4. USB2 out port (SV /2.4A)
  5. DC out port(15V/10A, Max150W)
  6. Power button
  7. BOOST button
  8. 12V jump start output
  9. LED flashlight

Included accessories:

 Display Screen Instructions

  1. READY solid: indicates the device is ready for jumpstarting the vehicle. READY blinks: indicates the car battery voltage is too low and need to activate the BOOST mode.
  2. Battery power percentage: Battery storage level.
  3. Small current mode: with this mode, it can charge devices that require a small current, such as headphones and smart watches, to turn on this mode, please press hold the button and BOOST button simultaneously for 2 seconds.
  4. Reverse connection indicator.
  5. Low temperature warning: indicates that temperature of the product battery is below 0°C/32° F.
  6. Vehicle battery diagnosis : When the vehicle battery’s voltage is detected to be low or abnormal, a warning icon will flash on screen, notifying you to charge or double check that battery.
  7. Input/output wattage.
  8. Vehicle battery voltage.

 Operational Guideline

Steps to Jump StarterVehicles(12V only)

Note:

  1. Suggest the battery power is higher than 75% before jump startthe vehicle.

  2. Ensure the vehicle is in PARK gear and all accessories (head lights, audio, etc)
    are turned off.

  3. Ensure the battery terminals are free of corrosion.

  4. DO NOT press the BOOST button before connecting the vehicle battery correctly.

  5. Ensure two clamps are connected to proper terminals.

Steps

  1. Connectthe plug of the clamp into the device(make sure it is fully connected).
  2. Connect the red clamp to the vehicle’s positive(+) battery terminal first ,and then connect the black clamp to the negative (-) battery termical.
  3. If the READY icon becomes on, start the vehicles directly.
  4. When the vehicles starts ,leave the engine running and remove the jump starter clamps from the vehicle battery in the order of negative(-) first and then positive(+). If other messages appear on the screen, please follow the corresponding steps in the following table.

Error Message on Screen

Error Message/ Cause/ Solution

Error Message Cause Error Solu ti on
X+eeeping Reverse connection. Please correct the connection between

clamps and battery terminals.
READY (blinks)+Beeping| Vehicle battery dead| Manual override, Press BOOST button for 2 seconds, when “READY” icon is solid, start the vehicle within 30 seconds.
E1″ +Beeping| The temp of jump starter is too low or high| Restore the temp of jumpstarter to O”C·45″C/ 32″F-113’F
E2″ + Beeping| Over current protection enabled.| Wait 30 seconds for jump starter to reset
E3 + Beeping| Over heat protection enabled (exceeded 4 jump start attempts within 10 minutes)| ****

Wait 10 minutes for jump starter to reset

“E4” + Beeping| Internal circuit is abnormal| Stop using and contact the service team
| Internal battery temperature is lower than 32 “F/0″C|

  1. Outputs can work normally
  2. The input is forbidden. please move the unit to the indoor temperature and recharge it again.

How to charge phones, tablets and 12Velectronic devices

  1. Select a suitable connection cable for the device.
  2. Connect the end of the cable to the device’s output port.
  3. Press the power button to start charging the mobile phones, tablets or other 12V electronic devices.

12v extension cable is not included

How to charge small current device, such as headphones and smart watches

  1. Select a suitable connection cable for the device.
  2. Connect the end of the cable to the device·s output port
  3. Press hold the POWER button and BOOST button simultaneously for 2 seconds to start charging

How to use the LED flashlight

  1. Press and hold the Power button for 2 seconds to turn on LED light
  2. The LED light has 4 modes, appearing in the following order:normal.SOS.strobe and OFF. Toggle between these modes by pressing the “Power” button lightly
  • The light will automatically switch off after 12 hours of inactivity

Technical Specification

Model JS5610 JS5710
Battery Capacity 59.2Wh 88.SWh
Start Current 600A S00A
Peak Current 2300A 3500A
USB-C In/Out PDl00W Max (5V/3A,9V/3A, 12V/3A,15V/3A, 20V/5A);
USBl Out Quick Charge 18W Max

(5V/3A, 9V/2A,12V/15A)

USB2Out| 5V/2.4A
DC Out| DC5521 15V/10A (150W Max)
Jump-Starting Temp| -20 ‘C ~ 55 ‘C /-4 ‘F~l31 ‘F
Charge Temp| 0 ‘C~ 45 ‘C / 32 ‘F~ll3 ‘F
Life Time| > 1000 Cycles
Full Charge Time| JS5610: about 45 minutes JS5710: about 1 hour

  • Charged by PDl00W

 FAQ

  • QI: How to turn off the jump starter?
    A1: This device is equipped with an intelligent power saving system, it will automatically shut down when there is no load. Or you can press and hold the power button for 10 seconds to force it to shut down.

  • Q2:How many times can this jump start a car after a full charge?
    A2: JS5610: approximately 25 times to start the gasoline 3.0L vehicle. JS5710: approximately 30 times to start the gasoline 3.0L vehicle.

  • Q3: What should I do if this unit can’t start a vehicle?
    A3: Recharge this unit fully, then press the “BOOST” button after connecting jump cables with your car battery. After READY(solid) appears on the screen, start your car engine within 30 seconds.

  • Q4:What is Peak Current?
    A4: Peak Current is the maximum current the battery in the JS5610/JS5710 can produce

Warning

Please be cautious when using it.

  1. Please be cautious when using it.

  2. Please read the instructions carefully before use,

  3. The product can only be used for starting 12V vehicles. It is prohibited to use it on equipment such as aircraft and ships.

  4. Please do not use it if the clamp or the unit has any damage.

  5. Do not use it as a car battery.

  6. Do not use it as a car battery charger.

  7. Please remove the unit from your car battery in time after cranking your car successfully.

  8. Please use the equipped jumper cables, and other accessories come with it only.

  9. Please make sure that the blue end of the jumper cable is fully inserted into the jumper cable interface. Otherwise, the blue end may melt.

  10. Before use, make sure all battery connectors are clean and the clamps are connected right. It will weak the starting performance if the battery
    poles are dirty or corrosive.

  11. Please do not use more than three times in a row. Or it can be overheated and damaged. It’s better to let it cool down for 2 minutes after using three times in a row.

  12. Please remove the product from the car battery within the 30s after use, or it may cause damage.

  13. Do not connect the positive and negative clamps when the power is on.

  14. Please make sure that the electricity is more than 25% when you use it to start your car.

  15. Please keep this product away from children,

  16. Do not play it as a toy.

  17. Do not wet the product.

  18. Do not immerse the product in water.

  19. Do not operate the product in an explosive atmosphere like the presence of flammable liquids, gases, or dust,

  20. Do not remodel or disassemble the product. Professional technicians are allowed to repair.

  21. Do not expose the product to extreme heat or fire.

  22. To avoid the risk of short-circuiting caused by metals falling into the hole, please remove your jewelry such as rings, bracelets, and necklaces before using the product.

  23. Do not drop the product. If the product is impacted or damaged, it must be tested by a qualified battery technician.

  24. Do not place the product in an environment where the temperature exceeds 700C/1580F.

  25. Please charge at room temperature not exceeding 450C/1130F, Only charge when the ambient temperature is between OOC/320F and 450C/1130F.

  26. Do not use the device to start the car when it is being charged.

  27. If the host leaks, please immediately recycle it with proper equipment.

  28. Under extreme conditions, battery leakage may occur. If the liquid comes out of the product, it cannot be handled directly by hand. In the case of skin contact, wash immediately with soap and water. If the liquid comes in contact with your eyes, rinse your eyes with cold tap water for at least 10 minutes and seek medical attention immediately.

  29. Lithium-ion battery-based products should be disposed of under local regulations at the end of their life.

Lumileds Holding B.V. is the warrantor of this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V and are used under license.
2024 @ Lumileds Holding B.V. All rights reserved

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals