iTECHWORLD iTECH200SS Super Slimline Lithium Batteries User Guide

iTECHWORLD iTECH200SS Super Slimline Lithium Batteries

KEY FEATURES

The iTechworld SS Range embodies an advanced deep-cycle lithium battery design. These batteries feature a built-in Battery Management System, ensuring seamless compatibility with many charging systems, making them ideal for caravans, motorhomes, tight spaces, and other applications. The SS Range batteries boast a super slim profile, perfect for installations where space is limited. With this in mind, they remain highly reliable and dust-resistant, catering to a wide range of user needs.

• Australian design and development
• Bluetooth monitoring
• LiFePO4 battery
• Compact and lightweight
• Heavy-duty metal casing
• High discharge rate
• Battery management system
• Over discharge protection (Safemode)
• Super slim design
• Long cycle life
• Australian lithium
• A grade prismatic cells

GENERAL SPECIFICATIONS

100SS – 120A & 50A Anderson

50SS – 50A Anderson    (coming soon)

Case Material| Stainless Steel

For more information on specifications please visit our website and select your iTechworld SS Range battery.

Scan to visit our website

SAFETY

For safe operation and optimal performance, of your iTechworld SS Range battery, it must be operated correctly. Please carefully read, understand, and follow all instructions and guidelines in this user guide. Failure to follow these instructions may result in damage to the unit, or property, death, or serious injury.
Disclaimer: While iTechworld has taken every precaution to ensure the accuracy of the contents of this user guide, iTechworld assumes no responsibility for any errors or omissions.
Furthermore, all specifications and functionality may change at any time without notice.
It is best to view our website for the most up-to-date information.

DO’S & DON’TS

DO

• Read the user guide
• Monitor battery state of charge
• Protect from physical damage

DON’T

• Don’t cross polarity the battery
• Don’t open the casing
• Don’t throw, squeeze, puncture, strike or disassemble the battery
• Don’t use this battery in series or parallel with another battery of different chemistry or capacity
• Don’t leave the battery in safemode for longer than 7 days
• Don’t ignore warning signs (such as unusual heat or swelling)

PARALLEL CONNECTION

SERIES CONNECTION

DISCHARGE CURVE

Please note that a lithium battery’s discharge curve will differ from your previous lead acid batteries. Please study the discharge curve to better understand how the lithium battery will perform.

OPTIMISING YOUR CHARGING
Embedded within every iTechworld battery lies a sophisticated battery management system (BMS) which sets our batteries apart from conventional lead- acid, calcium, or even other lithium batteries. This BMS enables the battery to accept a broad range of charge profiles, including sealed, flooded, AGM, and GEL, making it versatile for various charging systems. However, it’s important to note that the battery is not compatible with calcium-based charging profiles.
For optimal performance in systems with adjustable parameters, we recommend following our guidelines below. However, if your charger offers a dedicated lithium charge profile, it’s advisable to use that profile for the best results.

• BULK: 14.4v
• ABS: 14.4v
• FLOAT: 13.5V

RECOMMENDED CHARGING CURRENT

• iTECH300SS: 1 – 150A (coming soon)
• iTECH200SS: 1 – 100A
• iTECH100SS: 1 – 50A
• iTECH50SS: 1 – 25A (coming soon)

SAFE MODE

• We are committed to delivering the safest batteries in the Australian market, which is why we’ve integrated multiple safety features, including over-current protection, over-voltage protection, high and low-temperature protection, cross-polarity protection, and over-discharge protection.
• In the event that any of these safety features are activated, the tech world lithium battery will drop into safe mode, rendering it temporarily unusable until it is brought out of safe mode.
• In nearly all situations, except for when the battery’s voltage falls below 10.5 volts, the battery is designed to automatically exit safe mode.
• For example, if the battery’s internal temperature surpasses 80 degrees, it will enter safe mode.
• However, as soon as the internal temperature drops below 80 degrees, the battery will automatically recover and exit safe mode.

Please follow one of the below procedures to bring your iTechworld lithium battery out of safe mode.
If you have a solar panel in ideal weather, please follow the below steps in sequence to bring your iTechworld lithium battery out of safe mode.

• Disconnect all loads/inputs from the iTechworld battery.
• Connect your ‘flat’ battery to an unregulated solar panel.
• Leave the battery connected to the panel for 5 minutes.
• Once that 5 minutes is up. Disconnect the battery from the panel.
• Reconnect the battery to another charging source as soon as possible.(DCDC charger, Regulated solar panel, AC charger, etc)

If you have a portable Jump Starter, follow the below steps in sequence to bring your iTechworld lithium battery out of safe mode.

• Disconnect all loads/inputs from the iTechworld battery.
• Connect the Jump Starter cables to the battery (Positive to Positive, Negative to Negative)
• Connect an ACDC charger to the iTechworld battery. We recommend a three stage 20 amp or higher charger.
• Activate the jump starter to supply power to the iTechworld battery. The charger will now detect the battery and begin to charge.
• When the charger begins to charge the iTechworld battery, disconnect the Jump Starter from the battery.
• The charger should continue to charge the iTechworld battery, bringing it out of safe mode.

If you have a charged battery (E.G. car battery) and jumper cables, follow the below steps in sequence to bring your iTechworld lithium battery out of safe mod e.

• Disconnect all loads/inputs from the iTechworld battery.
• Connect your ‘flat’ battery to an unregulated solar panel.
• Disconnect all loads/inputs from the iTechworld battery.
• Connect the iTechworld battery in parallel to a different battery (number 2)
• Connect an ACDC charger to the iTechworld battery at the same time as the paralleled battery and allow it to begin charging. We recommend a three stage 20 amp or higher charger.
• When the charger begins to charge the iTechworld battery, disconnect battery number 2.
• The charger should continue to charge the iTechworld battery, bringing it out of safe mode.
• Allow the charger to fully charge the battery.

STORAGE
When your iTechworld SS range battery is not in use, it is recommended to completely isolate the battery, charge it up to 13.5V and check the voltage every 3 months, then charging the battery as needed. To ensure your battery is completely isolated, it’s essential to disconnect it from any connected devices or systems. You can also keep our maintenance chargers connected permanently, but if the battery is going to be completely out of use, keeping it connected is not necessary.

INSTALLATION

Your iTechworld SS Range battery boasts an impressive IP67 rating, making it suitable for installation in a wide range of environments. Here’s what you need to know: The X Range battery can be installed in any orientation, except for upside down (with terminals facing down). For those looking to mount your X Range battery under the bonnet of a vehicle, we recommend using a heat shield to protect the battery from under-the-bonnet temperatures. With the robust IP67 rating and these installation guidelines, your iTechworld X Range battery is ready to deliver reliable power wherever you need it.

CERTIFICATIONS

Our iTechworld SS Range batteries are in compliance with the following standards and certifi cations:

• UL1642
• IEC62133
• IEC62619
• CE
• ROHS

WARRANTY

• Your iTechworld SS Range battery is covered by a warranty for a total duration of 5 years. This warranty is divided into two phases:

3 Years Full Replacement

• During the first 3 years from the date of purchase, if your battery experiences any manufacturing defects or failures, we will provide a full replacement at no cost to you.
• This period ensures that your battery is protected from any initial defects or unforeseen issues.

2 Years Pro-rata Warranty

• Following the initial 3-year full replacement period, you have an additional 2 years of warranty coverage through our pro-rata warranty.
• During this time, if your battery experiences any issues, the replacement cost will be pro-rated based on the remaining warranty period.
• This means that you will only be responsible for a portion of the replacement cost, and the exact amount will depend on the remaining duration of the warranty.

WARRANTY CONDITIONS

• This warranty covers manufacturing defects and failures due to normal usage. Damage caused by misuse, abuse, or improper installation is not covered.
• The warranty is valid from the date of purchase and requires proof of purchase for any claims.
• To make a warranty claim, please contact our customer service team for assistance (service@itechworld.com.au).
• The warranty is applicable to the original purchaser and is not transferable. We are committed to providing you with a reliable and long-lasting battery.
• If you have any questions or need assistance regarding your warranty, please do not hesitate to reach out to us.
• We are committed to providing you with a reliable and long-lasting battery. If you have any questions or need assistance regarding your warranty, please do not hesitate to reach out to us.

WARNING

• Do not use any type of oil, organic solvent, alcohol, detergent, strong acids, strong alkalis, petroleum-based solvent or ammonia solution to clean the battery covers and end plates.
• These materials may cause permanent damage to the battery covers and end plates and will void the warranty.

DANGER

• People with physical disabilities, and visual, sensory, or mental impairments (including children) should not use this device. Children should be supervised to ensure they do not play with the battery.

WARNING

• Avoid using the battery near a fire.

WARNING

• Please use the wires recommended in this user guide; otherwise, it may result in damage to the battery, a risk of electrical shock, fire, death, or serious injury.

WARNING

• Do not drop the battery.

WARNING

• Do not use the battery to connect equipment if there is a defect.

WARNING

• Do not disassemble or modify the battery; doing so will result in your warranty being void, it may result in a risk of electrical shock, fire, death, or serious injury.

WARNING

• Never smoke or allow a spark or flame in the vicinity of the battery. This may cause the battery to explode.

LIMITATIONS OF USE

• Do not use in connection with life support systems or other medical equipment or devices.

BLUETOOTH

• Your iTechworld SS Range battery features Bluetooth capabilities. To access the Bluetooth user guide and download the IOS/Android App, please scan the QR code provided below.
• You can also find the app download links for IOS and Android by searching for ‘iTechworld’ in the respective app stores.

CONTACT

When it comes to energy storage and creation at iTechworld, we take pride in being one of the biggest names in the industry. Based in Australia, we are a family-owned and operated business. With many more innovative products on the horizon, we are committed to constantly raising the bar to provide bigger and better benefits to all our customers Australia-wide. Whether you’re an avid camper, 4WD enthusiast, freedom seeker, or camper, we’ve got your power needs covered. Escape the grid without compromise, minimize your downtime, and travel with comfort with our large range of leading products at great prices.

iTechworld. The Power Expert.

LOVE YOUR SS RANGE BATTERY? LEAVE A REVIEW

• 1300 483 249
• service@itechworld.com.au
• www.itechworld.com.au

References

• Lithium Battery, Solar & Power Generation Experts - iTechworld

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>