CIBER 2AYWV-6500 Tablet PC User Manual

: September 25, 2024
: Ciber

Table of Contents

Desk:
First use
Equipment operation interface
status bar describe
Use touch panel
Equipment basic set
Application
How to uninstall?
Privacy
Storage
Language & keyboard
Date & time setting
Apps Install and manage
Problem solution
Basic Function
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CIBER 2AYWV-6500 Tablet PC User Manual

Attention:
This handbook contains important security measures and the correct use of the product information, in order to avoid accidents. Pls make sure to reading the manual carefully before use the device.

Please don’t be in high temperature, moisture or very dust place
Please don’t be in high temperature, Especially in summer don’t put the device in the car when Windows closed.
Avoid fall or Violent collision of the device, don’t make the TFT display screen were violent tremor, This could cause TFT display screen abnormal or damage.
Please choose the appropriate volume, Use headphones should not be too big volume, If feel tinnitus. Lower the volume or stop using it
please charge in the following condition,
A. The battery power ICONS shows have no power
B. The system automatically shut off, startup after power off soon
C. Operation buttons no response
D. The machine that the top right comer show red icons
When the device in the format or ongoing upload and download file, please don’t suddenly disconnect, This could cause application error.
For those who because of damage to the product, repair, or other causes of erased the memory, The company shall not be liable for any responsibility, please follow the user manual for the standardised operation to use the device.
Don’t disassemble the product, don’t use alcohol. Thinner or benzene to scrubbing products
Don’t use the device one of the place of prohibit to use electronic equipment in regional (such as the plane)
Please don’t using the Tablet PC when you in driving or walking down the street,
USB just only be used for data transmission

The company reserves the right to improve product, products specification and design have any change, The information is subject to changes without prior notice. (This tablet is no waterproof function)

[Remark] All pictures in this manual is just for your reference. products specification and design have any change, The information is subject to changes without prior notice.

Desk:

Touch panel
Capacitive touch panel: In The Operation, to click,dragging on the touch panel

POWER
startup : Long Press and hold the power button, the system will enter the main interface
shutdown : In the main menu interface, Press the power button about 5 second to shutdown, The system can hint “power off” option, Clike”ok”. you can safely shut down.
Lock screen : Short press Power button to lock screen or unlock screen.
Remark

When power is empty.system will shut down automatically.
Illegal turn off the device, restart will scan and restore the disk, lt may take longer time to enter into system

BACK
Short Press BACK button will rectum the last interface,

MIC
Recording

Volume + Volume–

the buttons on top Volume +, Volume-achieve changes in the volume.

earphone jack
3.5 mm standard earphone jack

TF card
TF-CARD slot: external T-FLASH card

Mini USB
Mini USB jack: you can use it to connect the computer for data transmission, charging and external connection USB flash drive

DC Adapter
For charging. your tablet battery

Recovery
When the Tablet under the condition of the crash, upgrade firmware.

First use

Battery management and charge
Before first use, please set the device’s battery is fully charged Just need to connect the adaptor or USB interface, then you can charge.
The first two times charging please keep about 6 hours, after that you just need 4 hours to charge.

【Remark】: This tablet using Built-in type polymer battery, Charge must be to choose standard adaptor (Input: AC110-240V 50/60Hz Max: 180MA..
Output : DC5.0-5.5V/1.5A), this device without supply DC charging, USB interface can charge, Choose USB interface to charger During the charging, the battery icon will scroll When finished charging, battery icon will become green and stop rolling In order to prolong the service life of the machine, suggest use out battery power before charge it

【Remark】:

If you long time don’t to use this Tablet,, in order to avoid power consumption caused damage,pis charge/play the battery once a month.
After low battery shut down.connect DC adaptor, device will remind low battery, charging, need to wait some time until the battery is enough power to enter into main menu.
Device charging should be in standby status for reach normal charging time. Because with device and screen consumption, it may cause longer charging time.

Connection with PC
U Use USB cable to connect device to PC,device will pop up the USB connection window,click Turn on USB storage to connect to PC the load mode, you can copy, delete the file on the device and the file on the memory card.

Equipment operation interface

Main interface describe
After startup will enter the main interface the main interface,

you can: Management main interface software ICONS: long press the icons 3 second, after the icons will bigger, then you can drag anywhere in the interface.

Delete icons: long press the icons 3 second, drag the icons to the Recycle Bin icon, once it become red, Loosen your hand, after that you can delete icon.

You touch the screen keep a time, appear the dialog box Add yo Home screen as shown below:

status bar describe

The status bar above of the screen

Top left display main interface software, T-Flash card, USB connection status and so on
Top right display the battery, battery charge icons, current time, set time, Settings Menu, ESC button.

Use touch panel

Device equipped with a touch screen. Following the main touch screen area is described, and describes some of the tips for how to use the touch screen.
No matter which interface you are on the screen, can go back to main screen through pressing the soft key corner of the main screen. on the bottom right [Attention] The main screen soft key functions as the machine back key In different applications, by tapping the back soft key on the bottom right corner on the touch screen, you can return to its interface on the up floor.
In different applications, by tapping the menu key on the upper right corner of touch screen, the screen will appear the operation setting interface as follows, [Remark]: The main screen soft key functions as the machine manual.

In the main interface, you can touch the icon to open the APPS In different browser (file, music, video, pictures), You shift and drag the scroll bar, so that the file list can up or down to roll.

Equipment basic set

Setting: Click setting icons enter setting interface.

Silent mode, Volume, Notification ringtone, Audible selection, Screen lock sounds

Application

**Manage applications

Unknown sources: Click “Unknown.Sources”, then click “OK”
Manage application : manager and uninstall Application
[Remark] :** when you Firmware Upgrade, pls close the USB connect

How to uninstall?

enter “setting”>”Application”>”Manage application” And then there will be installed the program list
Click you want to uninstall icons, will enter the following interface
Click Uninstall, then you can delete the application

Privacy

**Factory data reset

**

Storage

Remove TF card, view of the available storage space
[Remark] : pls touch option”delete SD card”, so that can safety to remove SD card

Language & keyboard

Setting : (Language), text input and automatic error correction options;

Select Language: 54 kind of national languages are available
Remark: Android system can support 54 kind of language, now many interface just suport 14 language,
Android keyboard: Android keyboard setting
Sound on Key-press
Auto-capitalisation
Show suggestions: Display suggested words while typing
Auto-complete : Specebar and punctuation automatically insert highlighted word

Date & time setting

Set date, set time, Select time zone and select date format

Developer options
Choose USB work pattern: OTG/HOST/SLAVE……..

**About tablet

**

Apps Install and manage

App installer
This Tablet can support Android APP in market by third party, most Apps can install in the network, can copy to NAND FLASH or SD card. Click App installer icon, will appear Install, manage, Exit options.

Install : Click install, enter Apk install interface 1 Separately for Internal Memory disk and SD Card disk. Selec the APK you would like to install, click it to install, go back to main menu, will display the installed app you just selected.

Remark : some 3rd APP must install properly by memory card, downloaded 3rd paty app may not install properly on device.
Manage : click manage, enter third party interface Click install icon, will enter Action interface

Problem solution

Device can’t to open

Check the battery power
Connect adaptor first, then check again
After charging then can’t to open, pls contacy with the supplier

After startup the screen or the opening picture has been appear, the the device appear shutdown

Power is not enough, please charge Headset can’t hear the voice
Pis check the volume whether set to 0
Check the music file whether damaged. Try playing other music, if the file have damaged may lead to serious noise or hop sounds.

Can copy file or play music and so on

Pls check between computer and device is correct connection
check the memory storage space is already full
check the USB cable is good or not
USB connection is disconnected

Basic Function

Business 6500

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC with the Tablet PC transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the Tablet PC while operating can be well below the maximum value.
Before a new model Tablet PC is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each Tablet PC are performed in positions and locations as required by the FCC.
For body worn operation, this model Tablet PC has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 0 cm from the body.