MIDNIGHT OPTICS NVS-30 LRF Nightvision Scope User Manual

MIDNIGHT OPTICS NVS-30 LRF Nightvision Scope

Product Information

Specifications

• Laser Red Dot Ranging Module
• Objective Lens Focusing Adjustment Ring
• Objective Lens
• Picatinny Rail
• Infrared Retractable Illuminator
• Data Compartment
• Diopter Focusing Ring
• Battery Compartment Cap Eyeshade

Product Usage Instructions

Unboxing Instructions
The box contains a night vision device, a picatinny mount, a data cable, and two hex wrenches. This product does not include a memory card. If you intend to use functions such as taking photos and videos, you will need to prepare a FAT formatted TF card (maximum supported capacity of GB).

Installation Notes

• Battery Installation: Unscrew the battery cove and use a flat-head lithium-ion rechargeable battery with a rated voltage of 3.7V. Install it with the positive pole facing in. Please make sure the battery cover is tighten d.
• Picatinny Mount Installation: There are multiple screw holes under the night vision device. Use a hexagonal wrench to fix the guide rail as needed. The position of the mount can be adjusted appropriately through the screws. The Picatinny mount provided is suitable for many types of rails.
• Turn On/Off: Press and hold the power button for 3 seconds to turn on the device. Press and hold the power button to turn off the device. The power indicator light stays on in the power on/sleep mode.
• Sleep Mode: Enter sleep mode with a short press of Power/Sleep button when the device is turned on. Power indicator will stay ON when the device enters sleep mode.
• Eyepiece Dioptre Adjustment: Turn the focus ring so that your eyes can clearly see the text icons in the four corners of the screen.
• Objective Lens Adjustment: Aim the device at your target and adjust the objective lens ring until you get a clear and focused image.
• IR Illuminator Adjustment: Short press the navigation UP button to adjust the IR light level or focus the fill light by rotating and stretching the IR illuminator housing.
• Red Dot Adjustment: Long press the Menu button to activate the laser red dot. Adjust the position of laser using the provided hex-nut wrench.
• Menu Operation: Use the menu button to navigate through different settings and options.

FAQ

• What should I do if the device does not turn on?
  If the device does not turn on, ensure that the battery is correctly installed with the positive pole facing in and that the battery cover is tightly closed. Try charging the battery or replacing it if necessary.

• How do I adjust the focus for night vision?
  To adjust the focus for night vision, first perform eyepiece dioptre adjustment to ensure clear visibility of text icons. Then, aim at your target and adjust the objective lens ring until you achieve a clear and focused image.

NVS-30 LRF NIGHTVISION SCOPE PRODUCT USER MANUAL

Caution

• Do not look directly at the IR illuminator at close range, otherwise it will cause damage to your eyes!
• When the infrared illuminator is turned on, it will focus a large amount of energy. Do not aim at flammable objects at close range. Otherwise, it may cause a fire. Please turn off the IR fill light or enter sleep mode when not using the device.
• Please use a lithium-ion rechargeable battery with a rated voltage of 3.7V!
• If the equipment malfunctions, please contact the manufacturer. Do not open the case without authorization, otherwise the warranty service will be deemed to have been waived.

Note: Only suitable for charging with chargers below SV.

Unboxing instructions

The box contains a night vision device, a picatinny mount, a data cable, and two hex wrenches. This product does not include a memory card. If you intend to use functions such as taking photos and videos, you will need to prepare a FAT32 formatted TF card (maximum supported capacity of 128GB)!

Installation Notes

1. Battery installation
   Unscrew the battery cover and use a flat-head 18650 lithium-ion rechargeable battery with a rated voltage of 3.7v. Install it with the positive pole facing in.
   Please make sure the battery cover is tightened.

2. Getting Started
   After installing the battery and turning on the power, begin by adjusting the diopter. Rotate the night vision eyepiece diopter focusing ring until the four-corner text icon on the screen is clear (there’s no need to see the image clearly). Next, adjust the night vision objective lens focusing ring until the target is clearly visible.
   Switch between different palettes and test the infrared illuminator and red dot indicator light. For the ranging LRF version, please conduct a distance measurement test.

3. Picatinny Mount installation
   There are multiple screw holes under the night vision device. Use a hexagonal wrench to fix the guide rail as needed. The position of the mount can be adjusted appropriately through the screws. The picatinny mount provided is suitable for many types of rails.

Instructions

1. Turn On/Off
   Press and hold the power button for 3 seconds to turn on the device. Press and hold the power button to turn off the device. The power indicator light stays on in the power on/sleep mode.

2. Sleep Mode
   Enter sleep mode with a short press of Power/Sleep button when the device is turned on. Power indicator will stay ON when the device enters sleep mode.

3. The Eyepiece Dioptre Adjustment
   Eyepiece focusing, also known as diopter adjustment, aims to enable users with different eyesight to clearly see the display screen. Turn the focus ring so that your eyes can clearly see the text icons in the four corners of the screen.
   Please note : This does not mean that the image can be clearly seen after adjustment. This step is just to ensure that the four-corner icons on the display can be clearly seen.

4. The Objective Lens Adjustment
   Once the dioptre adjustment is completed, aim the device at your target and adjust the objective lens ring until you get a clear and focused image.

5. IR illuminator adjustment
   Under the black and white or green mode, short press the navigation UP button to adjust the IR light level (IR Levels 1-5 are available), or you can focus the fill light by rotating and stretching the IR illuminator housing.

6. Red Dot Adjustment
   Long press the Menu button to activate the laser red dot. The position of laser can be adjusted with the laser adjustment holes using the provided hex- nut wrench.

7. Menu Operation
   Short press the menu button to display the menu bar. Use the “▲” and “▼” buttons to select the submenu, short press the “menu” button to enter the submenu, short press the “▲” and “▼” buttons to switch options, short press the “menu” button to confirm.

8. Picture in Picture
   Press the “Menu” button to enter the submenu, press “▲” or “▼” to choose to turn on or off the picture-in-picture function, and short press the “Menu” button to confirm.

9. Reticle Profiles
   Used to save the ballistic zero point parameters set by the user.

10. Reticle Adjustment
    Short press the “Menu” button to freeze the image, short press the camera button to move to the X, Y axis value. Use the up and down buttons to adjust the crosshair position until it coincides with the impact point. Short press the camera button to move to other options. After the settings are completed, move to the save option. Short press the “Menu” button to save and exit, long press the “Menu” button to exit without saving. The set distance will be saved in the zeroing storage menu with the distance as the zeroing point name.

11. Distance Unit
    Select “meter” or “yard” in the submenu to change the distance measurement display unit.

12. OLED Brightness
    Select “OLED Brightness” with the cursor and press the “Menu” button to open the submenu. Select the five options of “Super Dark, Dark, Normal, Bright, and Super Bright” on the submenu to adjust the display brightness.

13. Color Enhance
    You can choose natural or enhanced mode and press the “Menu” button to confirm.

14. EV Compensate
    Select “Exposure Compensation” with the cursor and press the “Menu” button to open the submenu. Options “1-10”.

15. Gyro
    Press the “Menu” button to enter the sub-page, and select “On, Off, Adjust” on the sub-menu.

16. WIFI
    Select “WiFi” with the cursor and press the “Menu” button to open the submenu. Select “On” or “Off” on the submenu.

17. BC
    Select BC and press the MENU button to get the sub menu: Auto Ballistic On / Auto Ballistic Setting / Off.

18. Select Auto Ballistic On, press the MENU button to confirm. Hold the MENU button to quit.

19. Select Auto Ballistic Setting:
    Press the CAMERA button to switch the parameters Press the UP/DOWN button to adjust the values of the parameters.
    Press the CAMERA button to switch between Yes/Cancel. Select Yes to save the parameters and select Cancel to quit.
    Hold the MENU button to quit.

20. Select Off, press the MENU button to turn off BC. Hold the MENU button to quit.

21. Record Audio
    Select Record audio and press MENU button to open the sub menu. Select ON/OFF to adjust audio.

22. Time Stamp
    Select On/Off to confirm whether to display the date when recording or taking photos.

23. Language
    Select a language with UP/DOWN button and confirm with a short press of MENU button.

24. Auto Power Off Options: 10 minutes / 20 minutes / 30 minutes / Off. The default setting is Off.

25. Setting
    Select Setting and press the MENU button to get the submenu: Date/Time, Format, Default Setting, Version.

26. Date/Time
    Select Date/Time and press the MENU button to get the submenu. Move through the options with short press of CAMERA button. Change the option values with UP/DOWN button.
    Change the date display mode with short press of UP/DOWN button. Confirm by short press of MENU button. Don’t save with long press of MENU button.

27. Format
    Enter into submenu of Format, select Yes/Cancel to confirm or cancel with a brief press of MENU button.

28. Default Setting
    Select Default Setting and press MENU button to get the submenu. Select options Yes/Can-cel.

29. Version
    Select Version to view the device’s software version.

Shortcut key operation

The buttons correspond to a variety of operating functions. Short press or long press can achieve different shortcut operations.
sleep/power button
Press and hold the power button for 3 seconds to turn on the night vision device. Press and hold the power button in the powered-on state to turn it off. In power-on state, short press the power button to put the night vision device into sleep standby.

1. Exposure compensation/photography and video recording
   Short press to adjust exposure compensation, long press for 1.5-3 seconds to release shooting, and long press for 3 seconds to record video.

2. IR/Mode switching
   Short press to turn on the fill light (valid in black and white mode and green mode), long press to switch the image color mode.

3. MENU
   Short press to open the menu, long press to return to the previous level;
   When ranging is turned on, short press the menu key to lock/unlock the ranging data.

4. Zoom/Laser Rangefinder
   Short press to zoom in, long press to start ranging.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>