NEO LITE 07791L Smart RGB LED Strip 5m User Manual

NEO LITE 07791L Smart RGB LED Strip 5m

Specifications

• Protocol: Wi-Fi
• Frequency: 2400MHz~2483.5MHz
• Maximum RF Output Power: 20dBm

Product Information

Immax NEO LITE Smart strip LED 5m is a versatile lighting solution that offers RGB, CCT, color-changing, dimmable options. It comes with a wifi-enabled IR controller for easy operation and customization.

Product Usage Instructions

Function Button

1. Turn ON / Turn OFF: Two short clicks on the function button.

2. Modes Change: Long press the button for over 5 seconds to reset or for network pairing.

Download and Registration

1. Scan the QC Code to download the Smart Life APP or search for Smart Life in the App Store or Google Play to install the APP.

2. Open the Smart Life APP, and tap Register to create an account with your phone number or E-mail. Sign in to the APP.

Interface Introduction

Under color light mode, you can change to any RGB mixed color, and adjust brightness, and saturability.

Scene

1. Recommended Scene: Various modes are available for options; choose your preferred modes freely.

2. Customized Scenes: Choose + into the interface of the customized scene (Create scene) and operate according to the tips.

Music Modes Scene

Find the rhythm scene and choose + to create a new rhythm scene to customize your preferred modes. The light synchronizes changes with the selected rhythm scenes.

WIFI Music+IR Remote Controller Manual

When using, first remove the tail PVC sheet. During the pairing process, the remote controller cannot work.

INSTALLATION

1. Use the power adapter with DC12V of output voltage only.
2. Install the controller correctly, and use 3M tape to fix it.
3. Please unfold the LED strip to avoid overheating issues. Please connect the cables of the LED strip to the right position on the controller. Test the APP to check if it can control the LED strip correctly. If everything goes well, go to the next step.
4. Check and ensure the power supply, controller and LED strip are connected correctly.

ATTENTION

1. Do not put any metal around the controller, which could block the WiFi signal.
2. Ensure the power supply and controller are connected correctly.
3. The power supply output voltage should be same as LED strip working voltage.
4.  Do not cover anything on the surface of power supply, controller and LED strip.
5. Ensure the connection is correct before powering.

PRODUCT FUNCTIONS DIAGRAM

1. DC12V input connection port.
2. Output connection port to connect to LED strip.
3. Function button: Turn ON / Turn OFF(two short clicks)

MODES CHANGE

Long press the button for over 5 seconds to reset or network pairing

DOWNLOAD AND REGISTRATION

Scan the QC Code to download the “ Smart Life” APP. Search“Smart Life” in the App Store or Google Play to install the APP. Open the “ Smart Life” APP, and tap “Register”- to get an account with your phone number or E-mail. Sign in to the APP.

APP CONNECTION

Preparation jobs: Power on the LED strip and enter the home of APP, please make sure your mobile and the smart kits are connected to the same WIFI.

Solution 1

After powering on the strip, turn it on and off 3 times(or long-press the switch button for over 5 seconds), and the strip will go into a status of quick flashing. Find the “+”(in the corresponding room of the APP) to add devices. If your mobile has already turned on Bluetooth before connecting the LED strip, then no need to turn on Bluetooth again, the APP will connect to the LED strip automatically. If your mobile didn’t turn on Bluetooth before connecting the LED strip, the APP will pop up an interface with tips to ask you to turn on Bluetooth. Then please choose “Allow”, then the Bluetooth function of your mobile will be turned on. After that, the APP will pop up tips with info on the LED strips, then choose “Go to add”. Will go into an interface of a bluetooth device, choose the “+” and go into the next interface(Enter Wi-Fi password). Input the password of the WIFI and choose “Confirm”, then it will go into the status of “Connecting……”, you will need to wait for your mobile to pair with the controller at this step. Choose “Done” when it shows “Added successfully”, then go into operation modes. (If solution 1 is not suitable for your devices, please refer to solution 2)

Solution 2

After powering on the strip, turn it on and off 3 times(or long-press the switch button for over 5 seconds), the strip will go into a status of quick flashing. Find the “+”(in the corresponding room of the APP) in interface of “Add manually”. Then choose “lighting” to choose the correct smart devices and go into the interface of “Select 2.4 GHz Wi-Fi Network and enter password”. Enter the Wi-Fi password, then choose “Next” and wait until pairing is successful (- make sure your mobile and the smart devices are in the same Wi- Fi networks). Then go into the interface of “Scanning devices”, after scanning successfully and choose “Next”, it will pop up the interface of “Add successfully” and choose “Done” to go into the operation modes.

INTERFACE INTRODUCTION

Under color light mode, you could change to any RGB mixed color and adjust the brightness and saturability.

Scene:

1. Recommended scene: various modes are available for options, you can choose your preferred modes freely.
2. Customized scenes: choose “+” into the interface of the customized scene (Create scene), operation according to the tips.

Music modes

1. The interface of music mode includes local mode and APP mode for options. It means the lighting modes could synchronize change with the rhythm of music or voice that the smart devices received, light and sound synchronization without delay, and scenes with different color-changing rhythms. Local modes: could receive the voice via the smart controller, it could receive the surrounding voices to control the light color synchronize changing.
   APP modes : receive the voices via your mobile’s microphone to control the light color synchronize changing.

2. You could adjust the sensitivity and rhythm scene under the local mode. Sensitivity adjustment: move the slide button to adjust your preferable sensitivity. Rhythm scene: you can choose the recommended scene or customized your scene.
   Customized scene : find the “rhythm scene” and choose “+” to create a new rhythm scene to customize your preferable modes. The light synchronizes change with the selected rhythm scenes. Set your schedule (such as schedule a asleep time, and the light will gradually fade till turn off at a scheduled time) (auto-wake-up the light will gradual bright.,) Timer: Turn on and off the light automatically at a set time Left time: The lights will automatically turn off after the countdown. Power on behavior: do not disturb mode.suitable for frequent power failure areas, do not disturb when the power is on,To turn off the light through the APP,the power needs to be turned on twice in a row before the light will turn on Initial mode, initial default color and brightness. Customize, select colors and brightness.

WIFI MUSIC+IR REMOTE CONTROLLER MANUAL

When using, first remove the tail PVC sheet, When the controller is under the pairing process, the remote controller can’t work.

SAFETY INFORMATION

CAUTION: Keep out of reach of children. This product contains small parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can damage skin, clothing, or the area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following precautions:
– Do not use different brands and types of batteries in the same device
– When replacing the batteries, always replace all the batteries in the device
– Do not use rechargeable or reusable batteries.
– Do not allow children to insert batteries without supervision.
– Follow the battery manufacturer’s instructions for proper battery handling and disposal.
CAUTION : The product and batteries should be disposed of at a recycling center. Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought to the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage. CAUTION: Follow the
instructions in the enclosed manual.

MAINTENANCE
Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials. DO NOT USE solvents or other aggressive cleaners or chemicals.

A Declaration of Conformity has been issued for this product. More information can be found atwww.immax.cz

FAQs

Q: How do I reset the device?

A: Long press the function button for over 5 seconds to reset.

Q: How can I change to a specific color?

A: Under color light mode, you can change to any RGB mixed color using the interface.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>