Hunter Industries HC-075-FLOW-B HC Flow Meter Owner’s Manual
- September 23, 2024
- Hunter Industries
Table of Contents
Hunter Industries HC-075-FLOW-B HC Flow Meter
Product Information
The HC Flow Meter is a robust and simple-to-install flow sensor designed to detect, monitor, and report critical flow zone data and total system flows. It allows for the addition of wireless flow-monitoring capabilities to Hydrawise systems through a simple and affordable communication kit.
Specifications
- HC-075-FLOW-B (20 mm): Minimum flow 0.83 l/min, Maximum recommended flow 60 l/min, Maximum flow rate 80 l/min
- HC-100-FLOW-B (25 mm): Minimum flow 1.16 l/min, Maximum recommended flow 110 l/min, Maximum flow rate 130 l/min
- HC-150-FLOW-B (40 mm): Minimum flow 3.33 l/min, Maximum recommended flow 250 l/min, Maximum flow rate 330 l/min
- HC-200-FLOW-B (50 mm): Minimum flow 7.5 l/min, Maximum recommended flow 400 l/min, Maximum flow rate 500 l/min
Operating Specifications
- Wireless Operating Specifications:
- 152 m range (line of sight) from transmitter to receiver
- Communication frequency: 868 MHz for international models, 915 MHz for AU/NZ models
- Transmitter power supply: 3 AA batteries
- Receiver power supply: 24 VAC from host controller
- Approvals:
- FCC, CE, and RCM approved
- Transmitter is IP68 rated, Receiver is IP44 rated
Product Usage Instructions
- Choose the appropriate HC Flow Meter based on your pipe size.
- Install the flow sensor in the desired location ensuring proper alignment.
- If adding wireless capabilities, connect the communication kit as instructed.
- Ensure proper power supply for both the transmitter and receiver.
- Follow the user manual for calibration and setup procedures.
- Monitor the flow data reported by the HC Flow Meter regularly.
FAQ
Q: How do I calibrate the HC Flow Meter?
A: Calibration instructions can be found in the user manual provided with
the product. Typically, calibration involves setting the correct flow rates
and adjusting the pulse settings.
Q: Can the HC Flow Meter be used with other irrigation systems?
A: The HC Flow Meter is designed specifically for compatibility with
Hydrawise systems. It may not work seamlessly with other irrigation systems.
HC Flow Meter
Detect, monitor, and report critical flow zone data and total system flows
with this robust and simple-to-install flow sensor. Add wireless flow-
monitoring capabilities to Hydrawise systems with a simple and affordable
communication kit.
KEY BENEFITS
- Compatible with HC, HPC, Pro-HC, and HCC Controllers
- Compatible with ICC2 Controller via Centralus™ communication modules
- Flow Rate: 0.83 to 500 l/min (depending on size)
- Provides station-level flow rates and totals in Hydrawise Software
- Sends automatic alerts in the event of high-flow, low-flow, or unscheduled flow conditions
- Flow reports within Hydrawise Software can display total system water use and individual station water use for accurate water budgeting and tracking
- Robust brass construction with union fittings for easy installation and removal for winterisation
- Analogue dial on the face of the metre displays daily flow totals and a leak detector
- Optional wireless communication kit available for use with any HC Flow Meter and Hydrawise-enabled HC, HPC, Pro-HC, or HCC Controllers
HC FLOW METER SPECIFICATIONS
Minimum flow (l/min)
Maximum recommended flow (l/min)
Maximum flow rate (l/min) Dial reading (m3)
Operating Specifications
- Scaled pulse output is precalibrated from the factory based on the size of the meter
- Meter must be hardwired to the controller via shielded, minimum 0.75 mm2 wire, up to 300 m from the controller
- Accuracy: ± 2% of reading at recommended flow
- Warranty period: 2 years
Wireless Operating Specifications
- 152 m range (line of sight) from transmitter to receiver
- Communication frequency: 868 MHz for international models
- Communication frequency: 915 MHz for AU/NZ models
- Transmitter power supply: 3 AA batteries
- Receiver power supply: 24 VAC from host controller
Approvals
- FCC, CE, and RCM approved
- Transmitter is IP68 rated
- Receiver is IP44 rated
Copyright © 2024 Hunter Industries Inc. Hunter, the Hunter logo, and other
marks are trademarks of Hunter Industries Inc., registered in the U.S. and
certain other countries.
https://redesign.hunterindustries.com/en-metric/irrigation-product/sensors
/hc-flow-meter
052724
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>