Hunter Industries LINKMOD Luxor Linking Wireless Linking Module Owner’s Manual

Hunter Industries LINKMOD Luxor Linking Wireless Linking Module Owner’s

Manual

LUXOR LINKING OWNERS MANUAL

PROGRAMMING WIRELESS LINKING MODULE
Note: Before programming determine which module will be installed on the primary controller (LUX models) and which will be installed on the Luxor Satellite controllers (LSAT models). Primary Luxors are controllers with a facepack installed.

PRIMARY LUXOR

1. Insert wireless linking module (LINK-MOD) into the primary Luxor controller linking port.

2. From Home screen, select Setup

3. Within Setup screen, select Linking

4. Scroll to Chassis Number field, select 0 (Primary).

5. Scroll to Network ID field, select desired Network ID (1-255). This Network ID will need to be assigned to all wireless linking modules installed on the site.

6. Scroll to Wireless Channel field, select desired Wireless Channel. This Wireless Chassis ID will need to be assigned to all wireless linking modules installed on the site.

7. Scroll to Program and press scroll wheel. “Assignment Succeeded” will appear at the bottom of the screen

8. Remove module from Linking Port

SATELLITE LUXOR

1. Insert wireless linking module (LINK-MOD) into the primary Luxor controller linking port

2. From Home screen, select Setup

3. Within Setup screen, select Linking

4. Scroll to Chassis Number field, select desired Chassis Number (1-10).

Note: 0 (Primary) is assigned to wireless module used on Primary Controller. See section xxx

5. Scroll to Network ID field, select desired Network ID (1-255). This Network ID will need to be assigned to all wireless linking modules installed on the site.

6. Scroll to Wireless Channel field, select desired Wireless Channel. This Wireless Chassis ID will need to be assigned to all wireless linking modules installed on the site.

7. Scroll to Program and press scroll wheel. “Assignment Succeeded” will appear at the bottom of the screen

INSTALLING WIRELESS LINKING MODULES PRIMARY LUXOR

1. Using Wireless Linking Module assigned to Chassis Number (0 Primary), insert wireless linking cable through the 7/8” hole on bottom of Luxor cabinet
2. Plug wireless module into one of the Linking Ports
3.  Secure wireless module in place using supplied nut
4. For remote mount installations, thread wireless module into supplied mount.

SATELITTE LUXORS

1. Using Wireless Linking Module assigned to desired Satellite Chassis, insert wireless linking cable through the 7/8” hole on bottom of Luxor cabinet
2. Plug wireless module into one of the Linking Ports
3. Secure wireless module in place using supplied nut
4. For remote mount installations, thread wireless module into supplied mount.

CONTROLLER MOUNT

REMOTE MOUNT

Troubleshooting

Read feature
The “read” feature allows users to read wireless module settings by displaying Chassis Number, Network ID, and Wireless Channel on the Luxor facepack

1. Insert desired wireless linking module (LINK-MOD) into the primary Luxor controller linking port.
2. From Home screen, select Setup
3. Within Setup screen, select Linking
4. Scroll to Read and press scroll wheel. Wireless Linking Module settings will be displayed on Luxor facepack

MODULE DETAILS

ICON LEGEND

Operating the Luxor Controller

Operating the Luxor Controller

Care and Maintenance

Regulatory and Legal Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy, and if not installed and used In accordance with the Instructions, may cause harmful\ interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harm-ful Interference to radio or television reception, ,,..hich can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The us.er is cautioned that changes/modifications not approved by the responsible party could void the user’s authority to operate the equipment.
To satisfy FCC RF Exposure requirements for mobile and base station transmission devices. a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at a closer distance is not recommended.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Under Industry Canada regulations, t his radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>