Baseus W05 True Wireless Earphones Instructions

Baseus W05 True Wireless Earphones Instructions

Product Parameters

• Name: Baseus Encok True Wireless Earphones
• Model No.: Baseus Encok W05
• Material: ABS+PC
• Version: V5.0
• Standby time: 300 hours
• Music time: 4 hours (volume set to 70%)
• Music time with a charging case: 25 – 30 hours
• Battery capacity: 400mAh/1.48Wh (charging case) 30mAh/0.111Wh (earphones)
• Earphone rated input: DC5V=30mA
• Earphone rated consumption current: 10mA
• Charging case rated input: DC5V=400mA
• Charging case rated consumption current: 80 mA
• Charging time: About 1.5 hours
• Wireless charging time: about 2 hours
• Frequency response range: 20Hz-20KHz
• Charge port: Type-C
• Suitable for: Compatible with all wireless devices

Packing List

• Earphone charging case*1pcs

• Earphones (L&R) *2pcs

• Charging cable *1pcs

• User manual *lpcs

• Warranty card *lpcs

Product Diagram

Music mode

• Double-click the left earphone (L): activate voice assistant (Siri)
• Double-click the right earphone (R): play/pause
• Long press left earphone (L) for 1.5 second: previous song
• Long press right earphone (R) for 1.5 second: next song

Call mode

• Double-click left or right earphone (L or R): answer / hang up
• Long press left or right earphone (L or R): reject

Product Operating Method

Initial use
Please tear off the insulating sticker on the earphone, and then put it in the charging case.

1. Step 1- Turn on The earphones automatically enter the power-on state after taken out from the charging case.

2. Step 2- Pairing mode When using for the first time, the earphones automatically enter pairing mode after turn on.

3. Step 3- Wireless connect Turn on the Wireless function of the mobile phone, select the device model: Baseus Encok W05, and the white light is on for 1 second when connect successfully.

4. Step 4- Shutdown Put the earphone into the charging case and the earphone will power off automatically.

Important notice

1. In-ear Wearing Detection Check the status of wearing earphones. When users take off either earphone, music will stop playing and when users wear both earphones again, music will resume playing.
2. Pairing time In pairing mode, the earphones will automatically turn off if disconnection lasts for more than 5 minutes.
3. Restore factory settings Open the lid of the charging case (within 10 seconds), and long press the left and right earphones for 7 seconds. When the white light flashes, it means restoration of factory default settings completed.

Declaration on toxic or hazardous substances and elements contained in

electronic products

This form is prepared in accordance with SJ/T 11364 regulations.
0: Indicates that contents of the toxic and hazardous substances in all homogeneous materials are below the limit requirements specified by GB/T 26572 standard.
X: Indicates that contents of the toxic and hazardous substances exceed the limit requirements specified by GB/T 26572 standard in at least one homogeneous material of the component.
Please note: The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.

Product Safety Information

Please read all instructions and warnings carefully before using this product. Improper use may cause damage to the product. Do not store the product in high temperature, strong light and strong magnetic field. Do not place it in other harsh environments such as fire source. If water enters, dry it naturally and use it again.

Improper use of the product may cause damage to the product itself or may endanger personal and property safety.
Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
Disintegration of this product by non-professionals is strictly prohibited. Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection). Intense physical actions including knocking, throwing, trampling on and squeezing, etc. shall be avoided.

FAQs

Why my product cannot be turned on/off?

1. Make sure that the charging case and the earphones have battery left, take out the earphones from the charging case, and the earphones will automatically turn on;
2. Make sure that the charging case and the earphones have battery left, put the earphones back in the charging case, and the earphones will automatically turn off;
3. When the charging case is out of battery, please turn off the wireless function on your phone and the earphones will turn off automatically in 5 minutes; 4)Keep the charging area of the earphones and Pogo pin of the charging case clean, and regularly clean them with dry cloth.

Why is the in-ear wearing detection insensitive or too sensitive?

1. Make sure that the contact area of the earphones is clean and water-free;
2. Make sure that the fingers to touch the earphones are without water or other foreign objects;
3. If it is unable to connect after the above operation, please turn off the Wireless of other mobile phones close to the mobile phone and restore factory settings before connecting.

Why can’t my product connect to the wireless device again?

1. The earphones will be disconnected if they are out of the connection range of 15 meters. The earphones will automatically shut down if they are not back to the connection range within 5 minutes;
2. If the earphones fail to connect to the wireless device again within 5 minutes, please put the earphones into the charging case and close the lid, and then take them out.

Why is one of my earphones without sound after I take them out?

1. If this problem occurs, please put the earphones into the charging case and close the lid, and then take them out;
2. If it is unable to connect after the above operation, please turn off the Wireless of other mobile phones close to the mobile phone and restore factory settings before connecting.

It is not working when double tapping the earphone functions?

1. In order to avoid accidental touches, we made the special design for tapping, which is only supported after the earphone is put into the ear for 3 seconds. And then touch for different human body has different sensitivity, sometimes there will be touch insensitive phenomenon, which is normal.

The mobile phone cannot find the Wireless headphone, the Wireless connection is unstable or disconnected during use, thus resulting in unsmooth sound/interruption?

1. Please do not exceed the Wireless connection distance of the mobile phone, so as to avoid interference from the wall or the human body;
2. Please make sure the earphone has enough power, and re-enter the pairing mode to connect;
3. If it is unable to connect after the above operation, please turn off the Wireless of other mobile phones close to the mobile phone and restore factory settings before connecting;
4. Due to the property of the Wireless earphone, the electromagnetic waves in your area may interfere with the Wireless connection, resulting in sound problem or disconnection, please stay away from such areas before connecting.

Shenzhen Times Innovation Technology Co.,Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
TEL: +86 755-82433603
Hotline: 4000-712-711
Copyright©2010-2020 Shenzhen Times Innovation Technology Co.,Ltd. All Rights Reserved

Warning
Please follow the above safety instructions otherwise it will cause fire, electric shock,damage or other damage.

Service and support

If the product is defective or in case of problems during installa-tion, please consult your dealer or the Baseus product consulting via support @baseus-europe.de.

Disposal notification

Electric and electronic devices as well as batteries must not be disposed of MII. household waste. Consu-mers are obliged by law to return electric and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale.

Contact

Baseus Europe GmbH
HolbeinstraBe 7
86150 Augsburg
Germany
WEEE-Nr.: DE14120388
www.baseus-europe.de

Attestation of conformity
Hereby, Baseus Europe GmbH, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/ EU. The declaration of conformity may be consulted at www.baseus- europe.de.
Wireless version: 5.0
Wireless tranmission power: 3mW

QR Code:

Documents / Resources

| Baseus W05 True Wireless Earphones [pdf] Instructions
W05, True Wireless Earphones, W05 True Wireless Earphones, Wireless Earphones, Earphones
---|---
| Baseus W05 True Wireless Earphones [pdf] User Manual
W05, True Wireless Earphones, W05 True Wireless Earphones, Wireless Earphones, Earphones
| Baseus W05 True Wireless Earphones [pdf] Instruction Manual
W05 True Wireless Earphones, W05, True Wireless Earphones, Wireless Earphones, Earphones

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>