InfiRay MATE-MAL38 Thermal Clip On Showroom Piece User Manual

: September 23, 2024
: InfiRay

Table of Contents

MATE-MAL38 Thermal Clip On Showroom Piece
Specifications:
Product Usage Instructions:
Safety Instructions:
Power Supply Unit:
- FAQ:
How should I dispose of the battery?
What should I do with the device when I no longer need it?

MATE-MAL38 Thermal Clip On Showroom Piece

Specifications:

Intended Use: Displaying heat signatures during nature
observation, remote hunting observations, and civil use
Safety: Environmental influences warning, risk of swallowing
caution, safety instructions for use, safety instructions for the
power supply unit
Disposal: Directive 2006/66/EC for battery disposal, 2012/19/EU
(WEEE directive) for electrical and electronic device disposal

Product Usage Instructions:

Safety Instructions:

Environmental Influences: Avoid pointing the
lens at intense heat sources to prevent damage.

Risk of Swallowing: Keep the device away from
small children to prevent swallowing hazards.

Handling: Handle the device with care to avoid
damage to the internal battery.

Exposure: Do not expose the device to fire or
high temperatures.

Battery Replacement: Do not disassemble the
device to access the battery; consult after-sales service for
repair.

Water Use: Ensure the Type C cover is tightly
covered before using the product in a water environment.

Power Supply Unit:

Inspection: Check the power supply unit, cable,
and adapter for visible damage before use.

Defective Parts: Do not use any defective
parts; replace them promptly.

FAQ:

How should I dispose of the battery?

To dispose of the battery properly, follow Directive 2006/66/EC
guidelines. Return the battery to your supplier or designated
collection point for recycling.

What should I do with the device when I no longer need it?

For proper recycling, return the device to your local supplier
or designated collection point following the 2012/19/EU (WEEE
directive).

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

IMPORTANT SAFETY INFORMATION
Environmental influences WARNING! Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning glass and damage the interior components.
Risk of swallowing Caution: Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose which may be swallowed.
Safety instructions for use – Handle the device with care: rough handling may damage the internal
battery. – Do not expose the device to fire or high temperatures. – Do not disassemble the device to access the battery. The battery is not
meant to be replaced by the end user. – The battery capacity decreases when operated in a cold ambient

temperature. This is not a fault and occurs for technical reasons. – The recommended temperature for using this product is -20° to +50°.
Otherwise, it will affect the service life of the product. – Do not store the device for long periods at temperatures below -20°C or
above 50°C, or this will permanently reduce the capacity of the battery. – Always store the device in a dry, well-ventilated space. – If the device has been damaged or the battery is defective, send the
device to our after-sales service for repair. – Before using this product in an environment with water, ensure that the
Type C cover is tightly covered.
Safety instructions for the power supply unit – Check the power supply unit, cable and adapter for visible damage
before use. – Do not use any defective parts. Defective components must be
replaced. – Do not use the power supply unit in wet or humid environments. – Only charge the device at temperatures ranging between 0°C and
50°C.

– 1 –

InfiRay Outdoor · MATE Series · User Manual
– Do not make any technical modifications.
For further information and safety instructions, please refer to the User Manual provided. This is also available on our website in the download center: www.infirayoutdoor.com.
Disposal of batteries Directive 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. For battery details, refer to the documentation of the specific
product. The battery is marked with this symbol, which may include Cd (indicating cadmium), Pb (indicating lead), or Hg (indicating mercury). For proper recycling, please return the battery to your supplier or send it to a designated collection point. For more information, visit www.recyclethis.info.
User information on the disposal of electrical and electronic devices (private households)

www.infirayouordoor.com
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, please return this product to your local supplier when purchasing a new equivalent product, or send it to a designated collection point. For more information, visit www.recyclethis.info.
For business customers within the European Union Please contact your dealer or supplier regarding the disposal of electrical and electronic devices. He will provide you with further information.
Information on disposal in other countries outside of the European Union This symbol is only applicable in the European Union. Please contact your local authority or dealer if you wish to dispose of this product and ask for a disposal option.
Intended use The device is intended for displaying heat signatures during nature

– 2 –

InfiRay Outdoor · MATE Series · User Manual
observation, remote hunting observations and for civil use. This device is not a toy for children. Use the device only as described in this instruction manual. The manufacturer and the dealer accept no liability for damages which arise due to non-intended or incorrect use.
Function test – Before use, please ensure that your device has no visible damage. – Test to see if the device displays a clear, undisturbed image. – Check that the settings for the thermal imaging camera are correct.
See the notes in the section Operation.
Installing/removing the battery The MATE series thermal imaging attachment is equipped with a battery pack. It cannot be removed.

www.infirayouordoor.com

– 3 –

InfiRay Outdoor · MATE Series · User Manual

1 Specifications

Model

MAL25

MAL38

MAH50

Detector Parameters

Resolution, pixels

384 × 288

640 × 512

Pixel size, um

12

NETD, mk

30

25

Frame rate, Hz

50

Optics Parameters

Objective lens, mm

25

38

50

Field of view (H x V), 10.6 × 7.9 / 7.0 × 5.3 / 12.3 8.8 × 7.0 /

degrees / m @ 100 m 18.4 × 13.8

× 9.2

15.4 × 12.3

Recommended magnification of the day scope, x

G1/G2/G3/G4: G1/G2: 1 – 5 G1/G2: 1 – 5

1 – 5

G3/G4: 6 – 8 G3/G4: 6 – 10

E-zoom

Attachment mode: ×1 Monocular mode: ×1/×2/×4

Detection range, m

(Target size: 1.7m×0.5m,

1298

1948

2597

P(n)=99%)

Display Parameters

www.infirayouordoor.com

Type

OLED

Resolution, pixels

1024 × 768

Electrical Parameters

Battery

Built-in battery + Infiray battery Pack

Max. battery life, h

5 + 7.5

4 + 7

USB Interface

Type-C

Physic Parameters

Body Material

Magnesium Alloy

IP Rating

IP67

Remote control

Support

Built-in memory, GB

32

Aim point, MOA

1.5

1

Weight, g

460

500

530

Dimension, mm

132 × 62 × 68 138 × 62 × 71 146 × 62 × 73

Adapter Ring

M52×0.75

The actual operating time depends on the intensity of using Wi-Fi, video

recorder, laser rangefinder.

Improvements may be made to the design and software of this product

to enhance its useful features. Technical parameters of the device may

be improved without prior notice of the customer.

– 4 –

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

2 Package Contents
MATE Series Thermal Imaging Attachment Clip-on universal adapter* IBP-4 Infiray battery pack Power adapter Type C cable Side-entry picatinny rail Remote control base and bandage Remote control cover Heated target for zeroing (x10) Lens cloth Quick start guide
3 Description
MATE series are all-new generation front attachment designed as the infrared expansion device of the day light optics.

Different from the night vision device based on image enhancement, MATE doesn’t need external light source and isn’t influenced by strong light exposure. It can be used in the night or bad weather conditions such as fog, rain, smog and can detect the objects through obstacles such as branch, tall grass, dense bushes and so on. MATE has a wide range application including night hunting, observation and terrain orientation, search and rescue operations. Using the MATE Series Front Attachment includes several benefits over night hunting with traditional optics or even the night vision devices. Attaching the MATE Series to a traditional scope delivers the same creature comforts of shooting with day optics you are accustomed to, including your existing reticle and eye relief. The MATE Series Front Attachment even allows you to continue utilizing your riflescope’s variable magnification
4 Features
Quick “monocular-attachment” conversion

– 5 –

InfiRay Outdoor · MATE Series · User Manual
Quick mounting and removal of attachment 12m thermal imaging detector 1024×768 high resolution AMOLED display No re-zeroing required and quick attached Magnesium alloy housing Familiar precision Photographing / Video recording Support APP connecting via Wi-Fi Wireless remote control Four image modes White hot, Black hot, Red hot, Color Three scene modes Forest, Flatland, City Monocular`s digital zoom: ×1, ×2, ×4 Degree of protection IP67

www.infirayouordoor.com
5 Components and Controls
1. Eyepiece 2. Eyepiece bayonet-type ring 3. Down button 4. Menu (M) button 5. Camera button 6. Up button 7. Lens focus knob 8. Lens cover 9. Objective lens 10. Power button 11. Microphone 12. Type-C port 13. Bottom picatinny rail

– 6 –

InfiRay Outdoor · MATE Series · User Manual
6 Guidelines For Operation
The MATE series has been designed for long-term use. To ensure sustainable performance, please adhere to the following: Before use make sure that you have mounted and adjusted the device
according to the instructions of the section “Operation”. Store with the lens cap on in the carrying case. Switch off the device after use.

www.infirayouordoor.com
Attempts to disassemble or repair the device will void the warranty! The device is designed for use in various operating temperatures.
However, if it has been brought indoors from cold temperatures, do not turn it on for 2 to 3 hours. This will prevent external optical surfaces from condensation. To ensure reliable performance, it is recommended to carry out regular technical inspections of the unit.

7 Description of Controls

Button Power button
Up button

Current Status Power off Home screen Standby Menu interface Home screen Menu interface

Short Press –Standby the device Wake up the device Save and return to the upper interface Switch image mode Scroll up options

Long Press Power on the device
Power off the device
Turn the range notification function on —

– 7 –

InfiRay Outdoor · MATE Series · User Manual

Down button
Camera button
Menu button
Up + Down buttons +

Zeroing / Pixels defect correction interface Range Notification interface Home screen Menu interface Zeroing / Pixels defect correction interface Range notification interface Home screen Zeroing / Pixels defect correction interface Home screen Menu interface Zeroing / Pixel defect correction interface
Zeroing interface
Pixels defect correction interface

www.infirayouordoor.com

Move one pixel to the Up every time

Move 10 pixels to the Up every time

Switch image mode Shutter correction Scroll down options

Turn the range notification function off Background correction —

Move one pixel to the Down every time Move 10 pixels to the Down every time

Loop toggles animal types Take a picture

Background correction Video recording

Move one pixel to the Left every time Move 10 pixels to the Left every time

Enter shortcut menu interface Adjust parameter

Enter Main Menu interface Save and exit to the home screen

Move one pixel to the Right every time Move 10 pixels to the Right every time

—- —-

Save and set the coordinate of the zeroing position as (0,0) Add / Delete defect pixels

2

InfiRay Outdoor · MATE Series · User Manual

Camera + Menu buttons +
Down + Menu buttons +

Zeroing interface / Pixels defect correction interface
Home screen

—- —-

www.infirayouordoor.com
Save and exit to the home screen Switch between Attachment mode and Monocular mode

8 Installation
MATE series can be used as a monocular or front attachment for day light scope. Original design allows the monocular to be quickly converted into attachment and vice versa. You can quickly switch the operation state of the MATE between the monocular mode and the attachment mode with a long press of the Down (3) + Menu (4) buttons for 3s.
As a front attachment
MATE as an attachment is designed to use a day light scope both in the

nighttime and daytime in inclement weather (fog, smog, rain etc.). When use as a front attachment, please ensure MATE is in attachment mode, in which the status bar at the top of the screen shows G1/G2/G3/G4.
To mount it on a day device, please follow instructions as follows: Please make sure that the day device is zeroed before installation. Measure the outer diameter of the lens of your day scope. According to the outer diameter of the objective lens of your day device,
choose a suitable adapter (bought separately) with M52*0.75 internal thread. Screw the selected adapter onto the eyepiece of the MATE.

3

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

Install firmly the adapter with MATE together onto the objective lens of your day device.
Then you can use MATE as a front attachment.
As a monocular
When used as a monocular, it needs to switch to the monocular mode, in which the status bar at the top of the screen shows x1/ x2/ x4.
For a better observation experience, the InfiRay Monocular (14) is suggested to use (bought separately from the InfiRay website).
Screw the InfiRay Monocular (14) onto the eyepiece of the MATE. In monocular mode, the MATE supports up to 4x electronic zoom, and
with the 4×24 InfiRay Monocular (14), you will be able to obtain up to 16x amplification.

9 Operation
Open the lens cover (8). Press and hold down the Power (10) button for 3s to power the device
on. Wait for 5s until thermal image appears on the display. Lens Focus Adjustment: rotate the lens focus ring (7) to focus on the
object being observed. Calibration:
– Shutter correctioncalibration the image with a short press of the Down (3) button for shutter correction
– Background correction: long press the Down (3) buttonthe display will appear the prompt for “Cover lens during calibration” iconthen close the lens cover (8) to complete background correction.
Image mode Settings: short press Up (6) button to change the image mode from White hot / Black hot / Red hot / Color one by one.
Other image settings: short press the Menu (4) button to enter the Shortcut Menu interface, to set electronic zoom (only for Monocular

2

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

mode) / Brightness / Scene mode / Sharpness level. Power Off: long press Power (10) button for 3s to power off the MATE. Standby Mode: Press the Power (10) button briefly to standby the
device for power saving. And press the Power (10) button again to wake it up.
10 Zeroing (only for Attachment mode)
When MATE is installed on the day scope as an infrared extension component, if the reticle of the day scope is not in the center of the infrared image, the image zeroing function can be used to shift the infrared image to ensure the position consistency between the day scope image and the infrared image. Please finish the calibration of the day scope before mounting MATE. Install MATE on the day scope referring to the Installation section. Then aiming at the target at 100 meters and shoot. Measure the
horizontal distance and vertical distance between the bullet hitting point and the aiming point afterwards.

In the home screen, press and hold down Menu (4) button to enter the Main Menu interface.
Press the Up (6) / Down (3) button to select the Zeroing Profile option ( ) and select a zeroing profile with a short press of the Menu (4) button.
Then select the Zeroing option ( ) and short press the Menu (4) button to enter the Zeroing interface.
In the zeroing interface, short or long press the Up / Down / Camera / Menu button briefly to move the position of infrared image until the target on the infrared image is consistency with the reticle center of the day scope.
When the zeroing is done, long press Menu (4) + Camera (5) buttons to save and exit the zeroing interface, or hold down Up (6) + Down (3) buttons for 3s to save and set the coordinate of the zeroing position as

3

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

(0,0) and exit to the home screen.
11 Photography and Video recording
MATE series is built-in 32GB storage space for photography and video recording. The files of images and videos will be named by time, so it is recommended to set the time in the Main Menu or synchronize the time in the Settings of the InfiRay Outdoor APP before using the photography and video recording function.
Photography
Press the Camera (5) button in the home screen to take a photo. The screen freezes for 0.5s, and a photo icon appears on the screen.
Photographs are saved in a built-in storage space.
When the exclamation mark icon appears on the right side of the camera icon, it prompts that the

memory space is insufficient. Check and transfer videos and images to other media to free up the space.
Video recording
In the home screen, press and hold down the Camera (5) button to start a video recording.
A recording timer displays on the top of the screen. the time format is MM: SS (minute: second).
During recording, it is still possible to take a photo with a short press of the Camera (5) button.
Also, you can enter and navigate the menu function during video recording
Press and hold down the Camera (5) button to stop and save the recording.
The video and photo are saved in the built-in storage space.

4

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

Note
– You can open and operate the menu during video recording. – The images taken and the videos recorded are stored in the built-in
memory space in the format of PIC_HHMMSS.jpg (image) and VIDEO_HHMMSS.mp4 (video), with HHMMSS indicating hour/minute/second. – The maximum duration of a video recording file is 30 minutes. When the duration is more than 30 minutes, the video will be automatically recorded onto a new file. – The number of files is limited by the internal memory space of the device. Check the remaining space regularly, and transfer your videos and images to other media to free up the space on the memory card.
Memory Access
When the device is turned on and connected to a computer, it is recognized by the computer as a flash memory card, which is used to access the device’s memory and make copies of pictures and videos. Turn on the riflescope and connect it with the computer via Type-C
cable.

Double click “my computer” on the desktop – double click to open the device named “InfiRay” – double click and open the device named `Internal Storage’ to access built-in memory.
There are different folders named by time in the storage. Recorded photos and videos in that day are saved in the folders Select desired files or folders to copy or delete.

12 Shortcut Menu

In the home screen, press the

Menu (4) button briefly to enter the

shortcut menu interface. The

functions are as followings:

– E-zoom (

, only for

Monocular mode): short press

the Menu (4) / Camera (5) button to E-zoom the image from x1 to x4.

– Screen Brightness ( ): short press the Menu (4) / Camera (5)

button to switch the screen brightness from level 1 to level 6.

5

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

– Image Contrast ( ): short press the Menu (4) / Camera (5) button

to switch the image contrast from level 1 to level 6.

– Scene Mode (

): short press the Menu (4) / Camera (5) button

to switch the scene mode among Forest, Flatland and City.

Press the Up (6) / Down (3) button briefly to switch the function options. Press and hold the Menu (4) button to exit to the home screen or exit

automatically if no operation within 5s.

In the main Menu, press the Up (6) / Down (3) button briefly to switch the menu option.
Press the Menu (4) button briefly to adjust the parameters of present option or enter to the submenu.
Press and hold down Menu (4) button for 3 seconds to exit to the home screen.
Press the Power (10) button briefly to save and exit to the upper interface.

13 Main Menu

In the home screen, press and hold down the Menu (4) button for 3 seconds to enter the main Menu interface.

Main Menu function description

Ultraclear

Turn Ultraclear mode on/off Press and hold down the Menu (4) button to enter the Main Menu. Select the Ultraclear option with the Up (6) / Down (3) button. Turn the Ultraclear mode on /off with a short press of Menu (4) button, along with the sound of shutter calibration.

6

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

Wi-Fi
Video Output Auto shutter calibration

The icon will be displayed on the bottom status bar when the Ultraclear mode is on. Ultraclear Mode will show more image details under the cloudy, rainy, foggy and other harsh weather conditions. Turn Wi-Fi function on/off Press and hold down the Menu (4) button to enter the Main Menu. Select the Wi-Fi option with the Up (6) / Down (3) button. Turn the Wi-Fi function on /off with a short press of Menu (4) button. The icon will be displayed on the bottom status bar when the Wi-Fi is on. When Wi-Fi is on, it can be connected with the mobile phone APP. Turn video output on/off Press and hold down the Menu (4) button to enter the Main Menu. Select the Video Output option with the Up (6) / Down (3) button. Briefly press of the Menu (4) button to turn video output on/off. The icon will be displayed on the bottom status bar when the video output function is on. Video output function enable connectivity with an eternal display or recording device. Turn the Auto shutter calibration on/off Press and hold down the Menu (4) button to enter the Main Menu. Select the Auto shutter calibration option with the Up (6) / Down (3) button. Briefly press of the Menu (4) button to set the Auto shutter calibration mode on / off.

2

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

Video UI Zeroing Profile

The icon will be displayed on the bottom status bar when the Auto shutter calibration is on. When the Auto shutter calibration is on, the shutter will automatically when the Image quality deteriorates. Turn on/off the function of video recording with UI Press and hold down the Menu (4) button to enter the Main Menu. Select the Video UI option with the Up (6) / Down (3) button. Briefly press of the Menu (4) button to set the Video UI mode on / off. The icon will be displayed on the bottom status bar when the Auto shutter calibration is on. If the Video UI function is on, the UI information will be recorded with the video. Select the Zeroing Profile (only for Attachment mode) Press and hold down the Menu (4) button to enter the Main Menu. Select the Zeroing Profile option with the Up (6) / Down (3) button. There are four types for selection: G1/G2/G3/G4.
For MAH50: – G1/G2: Recommended magnification of the day light optics for 1x- 5x – G3/G4: Recommended magnification of the day light optics for 6x-10x
For MAL38: – G1/G2: Recommended magnification of the day light optics for 1x- 5x – G3/G4: Recommended magnification of the day light optics for 6x-8x

3

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

For MAL25:

– G1/G2/G3/G4: Recommended magnification of the day light optics for 1x-5x Briefly press of the Menu (4) button to Switch and select one zeroing type.

Zeroing

Zeroing (only for Attachment mode) Press and hold down the Menu (4) button to enter the Main Menu. Select the Zeroing option with the Up (6) / Down (3) button. Briefly press of the Menu (4) button to enter the Zeroing interface. In the zeroing interface, short press the Up / Down / Camera / Menu button briefly to

move the position of infrared image. Long press Menu (4) + Camera (5) buttons to save and exit the zeroing interface, or

hold down Up (6) + Down (3) buttons for 3s to save and set the coordinate of the zeroing position as (0,0) and exit to the

home screen. For the details, please refer to Section 10 Zeroing.

Range Notification

Range notification settings

Press and hold down the Menu (4) button to enter the Main Menu.

Select the Range Notification option with the Up (6) / Down (3) button.

Briefly press of the Menu (4) button to enter the Range Notification setting interface.

There are five prey type for selection, including hare ( ), coyote (

), wild boar (

), deer ( ), and custom ( ).

Each prey type corresponds to a default height with a default effective distance of 100m.

4

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

Pixels Defect Correction

Switch the type option with the Up (6) / Down (3) button, and short press the Menu (4) button to active option. The first four animal types can only set the distance parameter with the Up (6) /
Down (3) button. When setting is complete, press the Menu (4) button briefly to return to the range notification interface. The last one is custom, which can set the height and distance parameters. Press the Menu (4) button briefly to switch among the selection of the height, distance and returning to the range notification interface. Press and hold down the Menu (4) button to exit to the home screen. Pixels Defect Correction Press and hold down the Menu (4) button to enter the Main Menu. Select the Pixels Defect Correction option with the Up (6) / Down (3) button. Briefly press of the Menu (4) button to enter the Pixels Defect Correction Interface. A reticle will appear in the center of the screen and the number of corrected defect pixels will display at the bottom of the screen. And then, moving the reticle to select the Defect Pixels by pressing the Up / Down / Camera / Menu button. After selecting the Defect Pixels, press and hold the Up (6) + Down (3) buttons at the same time to correct the blind pixels. When the Add message appears on the bottom of the screen for a short time, the correction is successful.

5

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

Settings

At the same position, press and hold the Up (6) + Down (3) buttons again to cancel the correction with the Del massage

appearing for a short time.

The number of the defect pixels changes each time adding or deleting pixels

correction.

Repeat the above operations to continue selecting defect pixels.

When the correction is done, press and hold the Camera (5) + Menu (4) buttons until

display shows “Do you want to save these settings?” and “Yes” and “No” options.

Select Yes’ to save and exit, or selectNo’ to cancel saving and exit.

Switch the selection with the Up (6) / Down (3) button, and confirm your selection with the Menu (4) button.

This function is used to set the date, time, language, factory reset and view the device

information.

Press and hold the Menu (4) to enter the main menu.

Select the Settings option with the Up (6) / Down (3) button. Press the Menu (4) briefly to enter the submenu.

This menu item allows you to configure the following settings.

Date setting

Date setting In the settings submenu interface, select the Date option with the Up (6) / Down (3) button. The

date is displayed in year/month/day format.

6

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

Time setting Language

Press the Menu (4) briefly to activate the date reset function. Two small triangle symbols are displayed above and below the Year’ in default. Briefly press the Menu (4) button to switch among Year, Month, Day and Exit option. Press the Up (6) / Down (3) button to set the number. Time setting In the settings submenu interface, select the Time option with the Up (6) / Down (3) button. The time is displayed in 24-hours format as Hour: Minute. Briefly press the Menu (4) button to activate the time reset function. Two small triangle symbols are displayed above and below theHour’ in default. Briefly press the Menu (4) button to switch between Hour, Minute and Exit option. Press the Up (6) / Down (3) button to set the time. Language setting In the settings submenu interface, select the Language option with the Up (6) / Down (3) button. Enter the Language submenu with a short press of the Menu (4) button.

7

InfiRay Outdoor · MATE Series · User Manual

Press the Up (6) / Down (3) button to select the language desired.
Confirm your selection with a short press of the Menu (4) button and return to the upper interface automatically.

www.infirayouordoor.com

Factory Reset Info

Reset to the factory settings In the settings submenu interface, select the Factory Reset
option with the Up (6) / Down (3) button. Press the Menu (4) button to enter the Factory Rest
interface. Press Up (6) / Down (3) button to select “Yes” or “No”. Confirm your selection with a short press of the Menu (4)
button and return to the upper interface automatically. When “Yes” is selected, MATE will restore the factory settings and restart. When “No” is selected, it
will return to the upper menu interface.
System Information In the settings submenu interface, select the Info option with the Up (6) / Down (3) button.

8

InfiRay Outdoor · MATE Series · User Manual

Press the Menu (4) button to show the relevant information.
This item allows the user to view the following information: the device model, GUI version, PN and SN number, Wi-Fi version, and FPGA version.
Press and hold Menu (4) button to exit the Info interface.

www.infirayouordoor.com

14 Range Notification Function
Range notification function is used to determine if the animal is within your range. In the home screen, press and hold down the Up (6) button for 3s to
enter the range notification interface. You will see the following on the display: Two measurement bars,
Distance, Animal type, Animal height. There are five pre-set reference objects:
– Hare – distance 100m, height 0.2m

– Wolf – distance 100m, height 0.4m – Wild boar – distance 100m, height 0.9m – Deer – distance 100m, height 1.7m – Custom – distance 100m, height 1.0m Aiming at the target, if the target animal is within the measurement bars, it indicates the animal is within the range you set. At shooting range notification interface, press Down (3) button to change the target type. You can change the default setting (including the animal distance or

9

InfiRay Outdoor · MATE Series · User Manual
animal height) in the main menu. Exit the range notification interface with a long press of the Up (6)
button.
15 Wi-Fi Function
MATE series has a built-in Wi-Fi module, which enables the device to connect wirelessly to external devices such as smart phones. Press and hold down the Menu (4) button to enter the Main Menu. Turn Wi-Fi function on /off with a short press of Menu (4) button. Retrieve the Wi-Fi signal named “XXXXX_xxxxxxx” with an external
device such as smart phone, whch XXXXX represents the model and xxxxxxx represents the SN code of the device. Select the Wi-Fi, and enter the password on the mobile device to set up the connection. The initial password is 12345678. When Wi-Fi is successfully connected, you can control the device via InfiRay Outdoor APP.

www.infirayouordoor.com
Set the Wi-Fi name and password
The MATE series allows users to change the name and password of device Wi-Fi in the InfiRay Outdoor APP. After connected with the mobile
device, find and click the “Setting” icon in the InfiRay Outdoor to enter the setting interface. In the text box, enter and submit the new name (SSID) and password of the Wi-Fi. It needs to reboot the device to take the new name and password effect. Otherwise, clicking the synchronize time option in the setting interface can synchronize the time on the MATE with the mobile device.
Note : When restored factory settings, the Wi-Fi name, password, and system time are restored to the factory default settings.

2

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

16 Battery Pack Installation
MATE series is equipped with a professional power bank – IBP-4 InfiRay battery pack (15) in the package, which is impact-resistant, waterproof and lightweight, making it perfect for outdoor use.

30mm. After installation, insert the data cable (17) to Type-C port (12) of MATE
and the battery pack. Once connected, the battery pack will automatically charge the MATE. Press the Power button (16) of the battery pack to check the remaining
power of the battery pack. For details, please refer to the manual of the IBP-4 InfiRay battery pack.

Secure the IBP-4 InfiRay battery pack (15) to the smaller ring of the adapter fixture (18) in the package, and tighten the screws (20) with the hex-nut wrench (S=2mm).
Install the adapter fixture (18) with IBP-4 InfiRay battery pack (15) on your day scope. Close the lever (19) on the adapter fixture to lock the fixture.
The fixture is suitable for the most day scope with barrel diameter of

Safety Regulation
Please use standard charger to prevent the battery pack from damage. It is prohibited to expose the battery pack in the high temperature
environment more than 60ºC. It is prohibited to put the battery pack into fire and burns. The battery capacity decreases when operated in a cold ambient
temperature. This is not a fault and occurs for technical reasons.

3

InfiRay Outdoor · MATE Series · User Manual
17 Remote Control
MATE button module can be removed from the MATE and installed at any position of the gun with its own accessory as a remote control.
Remove the button module (21) from MATE unite. Install the button module (21) on the base (22) provided with the
package. Thread the two magic straps (23) into the base (22) and attach the
module onto the suitable position of your gun. Then you can control the MATE remotely. The remote control has a built-in battery that can be used continuously
for more than 30 days.

www.infirayouordoor.com
If the battery runs out, reattach the button module (21) to the MATE and charge it automatically via the pogo pin.
18 Update and InfiRay Outdoor
In order to continuously improve the product performance and provide better user experience, the software program, as well as parameters of the device will be constantly updated. Users can go to the official website (www.infirayoutdoor.com) to download and update. The MATE series support InfiRay Outdoor app technology, that can transmit the image via Wi-Fi from your scope to a smartphone or tablet and update the program. Download and install the InfiRay Outdoor app from the official website (www.infirayoutdoor.com) and app store, or scan the QR code below to download directly.

4

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

19 Technical Inspection
A technical inspection of the device is recommended before use. Check the external appearance of the device (there should be no cracks
in the casing). Check the condition of the lens and eyepiece (there should be no cracks,
greasy spots, dirt or other deposits) Check the condition of the rechargeable battery (this should be charged)
and the electrical contracts (there should be no presence of salts or oxidation).

20 Maintenance

Maintenance should be carried out at least twice a year and consist of the

following actions.

Wipe the external surfaces of metal and plastic parts free of dust and

Trouble description

Probable reason

Fail to start up

Battery is low power

dirt with a cotton cloth. Silicone grease maybe used for this. Clean the electrical contacts of the battery and battery slot on the unit
using a non-greasy organic solvent. Check the glass surfaces of the eyepiece and the lens. If necessary,
remove dust and sand from the lenses (preferably using a non-contact method). Cleaning of the external surfaces of the optics should be done with substances designed especially for this purpose.
21 General Trouble Shooting
The table lists all the problems that may occur when operating the device. Carry out the recommended checks and troubleshooting steps in the order shown in the table. If there are defects that are not listed in the table or it is impossible to repair yourself, please contact with us as soon as possible. Private demolition is strictly prohibited.
Trouble shooting Charge your MATE or use the InfiRay Battery Pack

5

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

Fail to work with the remote control
Image is fuzzy, not clear, with vertical stripes and uneven background Image is too dark

Remote battery is low power No calibration for a long time Low screen brightness

Blurred image with clear GUI

The objective lens is not focused
There is dust or condensate on the interior or exterior optical surfaces of the lens

No analog video output

The video output function is not turned on Data cable doesn’t support data transmission

Point of impact does not match the aiming point

Zeroing needs to be done Zeroing profile is incorrect

Attach the remote to the MATE’s body and charge it via the pogo pin
Perform the shutter calibration or background calibration
Adjust the screen brightness Adjust the focus ring of the objective lens until the image becomes clear Wipe off the outside optical surfaces with a soft cotton cloth. Let it dry by leaving it in a warm environment for 4 hours Turn the video output function in the Main Menu Replace a new data cable
Do zeroing according to the section 12
Check the zeroing profile setting

2

InfiRay Outdoor · MATE Series · User Manual

www.infirayouordoor.com

22 Legal and Regulatory Information
Wireless transmitter module frequency range: Bluetooth: 2.402-2.480GHz (For EU) Wireless transmitter module power < 20dBm (only for EU)
We hereby declare that the radio equipment Mate series is in compliance with the Directives 2014/53/EU and 2011/65/EU
FCC Statement
FCC ID: 2AYGT-2N-00
Labeling requirements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information to the user

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
EMC: Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
To comply with RF exposure requirements, a minimum separation distance of 0.00 cm must be maintained between the user’s body and the handset, including the antenna.

2