battat BT1849 Foam Fort Building Set Installation Guide
- September 22, 2024
- BATTAT
Table of Contents
battat BT1849 Foam Fort Building Set
Specifications
- Product Name: CLOUD CASTLETM Foam Fort Building Set
- Dimensions:
- Length: 66.5 in (169cm)
- Width: 33.25 in (84cm)
- Height: 24.5 in (62cm)
- Foam Arch Height: 8.25 in (21cm)
- Foam Stair Height: 5 in (13cm)
- Foam Half-Sun Diameter: 16.5 in (42cm)
- Recommended Age: 12 months and above
- Manufacturer: Maison Battat Inc.
- Made In: China
Product Usage Instructions
-
Open the packaging carefully with scissors to avoid damaging the shapes.
-
Allow the foam shapes to expand for at least 48 hours for best results.
-
Avoid using a blow dryer on one spot for too long; move side to side to evenly expand the foam shapes.
-
Close zippers securely and ensure pull tabs are hidden to
prevent children from unzipping the foam shapes. -
Avoid sitting or standing on the foam arch.
-
Adult assembly is required for setup.
-
Keep away from fire and heat sources to prevent damage.
-
Follow washing instructions to maintain the product’s quality.
Washing Instructions
To wash the covers, follow these steps:
- Remove covers from the foam pieces.
- Wash according to the provided washing instructions.
- To replace the covers, pull on them with one hand and push the foam piece with the other hand for easier fitting.
FAQ
Q: Can children under 12 months use this product?
A: It is recommended for children aged 12 months and above due to small
parts that may pose a choking hazard.
CLOUD CASTLE™Foam Fort Building Set
PARTS LIST
Cut open the packaging
-
CAUTION: Use scissors carefully to avoid cutting the shapes!
-
Foam shapes expands when opened
-
For the best results, leave the foam shapes to expand for at least 48 hours.
-
Reshaping:
- If the foam pieces do not achieve the desired shape after more than 48 hours,use a blow dryer (at a normal temperature) to correct the shapes.
- Keep the blow dryer 4 inches (10cm) from the foam pieces
- Reshape the warmed foam pieces by hand
- CAUTION: do not keep the blow dryer focused on one spot.
- Be sure to move side to side.
-
Close the zippers and make sure the pull tabs are fully hidden beneath the lining to prevent children from unzipping the foam shapes.
FINAL
WASHING INSTRUCTIONS
- Remove the covers
- Do NOT wash the foam shapes
- Machine-wash at max. 30°C/86°F
- Do NOT bleach
- Tumble dry on low
- Do NOT iron
- Do NOT dry clean
OPTIONS FOR WRINKLE REMOVAL
- Wipe the cover with a damp washcloth and dry it with a blow dryer
- Iron the cover with a steam iron without direct contact (do NOT use a dry iron)
- For the best results, wash and dry the cover
How to replace the covers after washing them
When putting on a cover, pull on it with one hand and push the foam piece with
the other.
This helps when replacing a cover.
WARNING! Keep away from fire and heat sources to avoid permanent damage
to the product.
Adult Assembly required.
© 2024 MAISON BATTAT INC.
Manufactured for Maison Battat Inc.
8440 Darnley Road, Montreal, P.Q. H4T 1M4 Designed by Maison Battat Inc.
Battat® is a registered trademark of Maison Battat Inc.
Made In China.
All Battat® products meet all US standards. Colors may vary.
Please retain this information for future reference. Please remove all
packaging materials before giving to children.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>