ZOSI ZR08WS Series WiFi 4K 8-Channel Wireless NVR User Guide

September 21, 2024
ZOSI

ZOSI ZR08WS Series WiFi 4K 8-Channel Wireless NVR

For more information of your new system, please refer to www.zositech.com

Package Content

Note: The product and accessories vary according to different models, please prevail in kind.

Product Structure

Note: The actual product appearance varies with different models, please prevail in kind.

Connection Diagram

  1. Connect the NVR to Router with an Ethernet cable
  2. Connect Monitor to the NVR with HDMI, or VGA Port (VGA cable is not included)
  3. Plug the Mouse to the USB port
  4. Connect the NVR to a power source (12V 2A power adapter)
  5. After the system starts, power on the IP camera and wait for the camera to be paired and connected with the NVR (8 channels at most).
  6. The monitor will display the real-time monitoring image of the camera

Note: The picture is for reference only, please prevail in kind. Before installation, please power on to test the product.

Access the NVR from your smartphone or PC

View on Smartphone
Search Zosi Smart in App store or scan the QR Code to download the App. Follow the prompts to install, register and log in to the APP. When configuring and using the device, please update the APP to the latest.

Note: During APP installation and use, please allow the APP to obtain all required permissions; otherwise, device network configuration fails to be added.

View on PC Client
Please download AVSS Client in https://www.zositech.com/app/.

System Setting

Mouse Use

Left Button

  • When the monitor displays live and playback images in split screens, Double-click a split screen to make it full, and double-click again to return to the split screen.
  • When navigating the menu,Click to open an option.

Right Button

  • On the live preview screen, click to bring up the main menu.
  • When navigating the menu,Click to exit the menu or return to the previous one.

Menu Introduction

Right-click anywhere on the live view screen to open the menu.

  • Select single screen for live preview
  • Select multi-screen for live preview
  • Start/stop a live preview of the scan
  • Set the colour of the camera image
  • Zoom in the live preview screen
  • Set the volume of the camera
  • Control the rotation of the PTZ camera
  • Capture and save the live preview screen
  • Start/stop full-time record
  • Query and play back the videos/play back quickly
  • Set up intelligent detection and light & siren alarm
  • IPC channel config management
  • Open the main menu

System password
The default user name is admin and the default password is blank. You can directly log in to the system for the first time with power on.

Password change path: Right click the mouse > go to Main Menu > Config Management > User Management > Change Password.

Note: The new password cannot be less than 6 characters. Please keep it safe.

System Time Setting

Right click the mouse > go to Main Menu > Config Management > Basic Config > Date and Time > Select the appropriate time zone based on your location, and click Apply.

Note: GMT is the default time zone. Please select the time zone based on your location.

Video Playback

Right click the mouse > Video Playback, you can choose Video Playback/Quick Playback.

  • Video Playback: Search the video you want via Time or Event, then play it.
  • Quick Playback: You can quickly play back the previous 30 minutes of the video.

Video Backup

  1. Plug a USB flash drive into the USB port of the NVR.
  2. Right click the mouse > go to Main Menu > Data Backup > Select the channel and time period > Search > Select the video clip you want to back up > Click “Backup”.

 Usage Specification

  • Use the camera only with compatible ZOSI NVRs.
  • Read this guide carefully and keep it for future reference.
  • Follow all instructions for safe use of the product and handle with care.
  • Use the product within given temperature, humidity, voltage level noted in the device’s specifications.
  • Do not disassemble the product.
  • Use only a regulated power supply with the product (optional). Use of a non-regulated, non-conforming power supply can damage the product and void the warranty.
  • Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.
  • Do not use the product in a sealed, humid environment. It is recommended to place it in a location that is easily ventilated for installation.
  • Do not disassemble the device while power is on.

 FAQ

Q: No Video Output on the Monitor?

  • Ensure the lowest resolution of the monitor is no less than 720p.
  • Ensure the NVR is powered on normally.
  • Check the connection of the HDMI/VGA cable or use another cable to try again.

Q: Failed to Remotely Access the Camera via Mobile Phone or Computer?

  • Ensure the NVR is connected to the network normally, you can go to the NVR Menu-Network-Test.
  • Test and verify whether you can access the Internet by connecting your phone or computer to the same network as the NVR.
  • Reboot your NVR or router.

Q: Does the system support motion detection and image capture?

  • It captures images automatically when people, and cars, are detected or when there is a change in detected images. Users can also manually capture images using our ZOSI Smart APP.

Notification of Compliance

FCC Compliance Statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including inference that may cause undesired operation.

Simplified EU Declaration of Conformity
ZOSI declares that the device is in compliance with the essential requirements and other relevant provisions if Directive 2014/53/EU.

Correct Disposal of this Product
This marking indicates that this product cannot be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased. They can take this product away for environmentally safe recycling.

WARNING

  • INGESTION HAZARD: This product contains a button cell or coin battery.
  • DEATH or serious injury can occur if ingested.
  • A swallowed button cell or coin battery can cause Internal Chemical
  • Burns in as little as 2 hours.
  • KEEP new and used batteries OUT OF REACH of CHILDREN Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  • Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate them.
  • Even used batteries may cause severe injury or death.
  • Call a local poison control center for treatment information.
  • The compatible battery type: CR2032
  • The nominal battery voltage: 3V
  • Non-rechargeable batteries are not to be recharged.
  • Do not force discharge, recharge, disassemble, heat above 60℃(manufacturer’s specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

Products with non-replaceable button/coin cell batteries shall additionally include a statement indicating the product contains non-replaceable batteries

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body. For the USA: The frequency stability of all transmission frequencies of U-NII-1, U-NII 2A, U-NII 2C, and U-NII-3 meets the requirements of 47 CFR FCC Part15.407(g), and the manufacturer declares that their transmission is maintained at Band U-NII-1, U-NII 2A, U-NII 2C, and U-NII-3.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.
  • ISED Radio Frequency Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile exposure conditions. The min separation distance is 20 cm.
  • For Canada: The frequency stability of all transmission frequencies of U-NII-1, U-NII 2A, U-NII 2C, and U-NII-3 meets the 47 CFR FCC Part15.407(g) requirements, and the manufacturer states that their transmissions remain within the U-NII-1, U-NII 2A, U-NII 2C and U-NII-3 bands.
  • Support Email: service@zositech.com
  • Facebook: https://www.facebook.com/ZosiTechnology/
  • Whatsapp: +1-866-841-6932
  • UK Whatsapp: +86 18675610962
  • Responsible Party: Ansjer Electronics Co., Ltd
  • Company name: Loocam Technology LLC
  • Address: 2205 Hutton Dr, Unit 100, Carrollton TX 75006
  • Tel: 657-223-3477
  • E-mail: lavenderl@loocam.com

Copyright © 2024 ZOSI Technology Co., Ltd.
No part of this publication may be reproduced in any way without the written permission of ZOSI. The information in this publication is believed to be accurate in all respects. ZOSI assumes no responsibility for any consequences resulting from their use. As our products require continuous improvement, ZOSI reserves the right to modify product designs, specifications, and prices without notice and any obligation. All rights reserved, and ZOSI reserves the final interpretation right of this manual.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals