BYTECH G05 TWS Earphone User Manual

BYTECH G05 TWS Earphone

Product Information

Specifications

• FCC ID: 2AHN6-AUBE247
• Charging: DC 5V adapter (not included)
• Compliance: Part 15 of FCC rules

Product Usage Instructions

Paring

• Auto Pairing
• Syncing
• Open Bluetooth Settings

Operation

• Power On/Off
• Play/Pause Music
• Previous/Next Song
• Volume +/
• Answer/Hang Up
• Reject Call
• Voice Assistant

Charging Function

• Charging the Case

Frequently Asked Questions

Q: What should I do if the earphones do not sync together?
A: Follow the steps provided in the Paring section above to ensure proper syncing of the earphones.

Q: How do I know when the charging case is fully charged?
A: The display screen on the case will show 100% power when it is fully charged.

Paring

• Auto Pairing
  Take the earphones out of the charging case, and then the earphones will automatically turn on, sync together, and enter pairing mode.

• Syncing your earphones
  When earphones do not sync together or enter a disconnected state during use.

  •  Turn off both earphones and turn them back on.
  • If that does not work, place both earphones back into the case, close the charging case, and then open the charging case again.
  •  While earphones are out of the charging case. Press and hold both earphones for 3 seconds. This will force the earphones to turn off and on again and sync with each other.

• Open up the Bluetooth setting on your smart device and scan for G05.

Operation

• Power on/off
  • Take the earphones out of the charging case, and automatically turn on; Put the earphones back into the charging case, and automatically turn off;
  • Long press 3 seconds to turn on Long press 5 seconds to turn off.
• Play/Pause music.
  • When listening to music.
  • Tap left/right earphones once to play or pause the music.
• Previous /Next Song
• When listening to music.
  • Quick double tap left earphones to go to the previous song.
  • Quick double-tap right earphones to go to the next song.
• Volume -/+
  • Quick tap the left earphones 3 times to decrease the volume.
  • Quick tap the right earphones 3 times to increase the volume.
• Answer/Hang up
  • When there is an incoming call.
  • Tap left or right earphones once to answer the call.
  • Tap left or right earphones again to end the call.
• Reject
  • When there is an incoming call.
  • Long press left or right earphones for 2 seconds to reject the call.
• Voice assistant
  • Long press left or right earphones for 2 seconds

Charging Function

Fully charge the case and earphones before using them for the first time.

• charging the charging case

  •  The display displays the power and flashes to indicate charging has begun.
  • Once fully charged, The display screen will show 100% power.

• earphone charging
  When the battery is low, each 5s flash once for the left and right side red lights at the same time,  and you will listen to a warning sign or tone. It will turn off when the earphones are completely out of battery.

  • Place the earphones into the charging caThe red
  • Red light on the earphones turns on when charging has begun. The light will turn off when charging is complete.
  • When the earphones are charging, The charging case display logo of the “R or L” will light up. Once fully charged, the display will be extinguished.

Warning

Special Note: Before using the earphone for the first time, please put the earphone into the ordinary charging case once and then remove it. Only then can touch be effective. Please read the warnings below carefully. Store this manual with product packaging.

• The safety precaution manual reduces the risk of fire or injury when correctly complied with.

• To reduce the risk of injury :

  • Keep batteries out of reach of children.
  • Do not heat, open, or dispose of the battery pack in a fire.
  • Do not allow metal objects to touch the battery on the device.
  • Do not expose the battery pack to excessive heat.
  • Do not use a high-current charger or the charging line will burn out.

• Please Charging with a DC 5V adapter (not included in the package)

• This device has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
  against harmful interference in a residential installation.

• This device generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the device and receiver.
  • Connect the device to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>