KingAnDa YYK-Q71 Clip on Wireless Headset User Manual
- September 20, 2024
- Kinganda
Table of Contents
KingAnDa YYK-Q71 Clip on Wireless Headset
Product specifications
| Wireless Version: | V5.3 |
|---|---|
| Talk time: | about 6 hours |
| Music playing: | about 6 hours |
| Standby time: | 80 hours |
| Communication distance: | 10m |
| Charging time of headset: | about 1 hour |
| Headset battery capacity: | 30MAH |
| Battery capacity of charging chamber: | 300MAH |
| Frequency characteristic: | 2.40ghz-2.48-ghz |
| Support agreement: | A2DP1.3/HFP1.6 HSP1.2/AVRCP1.6/D11.3 |
multiple use key
| Pause/play: | Briefly press the MFB key |
|---|---|
| Last song: | Press the L ear MFB key twice when playing the song |
| Next song: | Press the R ear MFB key twice when playing the song |
| Sound plus: | Press and hold the right ear MFB key |
| Sound reduction: | Press and hold the MFB key on the left ear |
| Answer the call: | Click MFB key when calling |
| Hang up the phone: | Click MFB key during call |
| Call rejection: | Double-click MFB key when calling |
| Cancel call: | Click MFB key when dialing |
| Call Siri: | Press the left or right MFB key 3 times in the state of not |
playing songs
Cancel Siri:| Press the left or right MFB key once when the MFB key is not
playing songs
Power on/off
- When the headset is taken out of the charging chamber for the first time The headset will turn on automatically. Put the headset back in the charging chamber and it will start charging and automatically shut down.
- When the headset is not in use, put it back into the charging chamber and turn it off automatically.
How to reset
When the headset is in pairing status, press the MFB key 4 times. Put the
headset inThe headset will automatically shut down and start charging. After
removing the headset
It will start automatically and the reset will be completed.
How to pair
- Take out the charging chamber to start the machine
- Automatic headset pairing
- Open the settings of mobile phone/tablet — Bluetooth
— Open Bluetooth — Search—
YYK-Q71 — pairing/connecting — playing music.
Computer/laptop pairing method
Turn on PC settings – Devices – Wireless and other devices – Turn on Wireless – Add Wireless Or other devices – search Wireless device YYK-Q71 – pair/connect- play music.Note: If the computer doesn’t have Wireless, please insert the Wireless adapter and download the Wireless driver Then it can be used normally.
How to charge the headset
- Put the headset into the charging compartment, and the headset will automatically shut down and start charging,The display lamp of the charging compartment lights up, indicating that the charging compartment is charging the headset.
- The red light is always on when charging the headset, and the blue light is always on when charging the headset. The charging chamber is off.
Charge the charging chamber
Please use the mobile phone adapter to charge the charging chamber. You can use the computer Type-c cable Or other chargers with Type-c interface.
Safety precautions
For high-quality earphones, please refer to the following instructions to prolong the service life:
- Please keep away from high temperature, high humidity and corrosive environment.
- Please prevent the product from being hit, dropped, bent, soaked, etc.
- Please do not remove the headset or charging stand.
- Please do not allow the product to be overcharged all the time, so as to reduce the service life of the product.
- If it causes any discomfort or pain, please stop using this product.
- Use a DC 5V-1A adapter certified by a regulated manufacturer. Repeated charging and discharging of the headset will cause the battery performance to decrease over time, which will affect all rechargeable Electronic products are normal.
There are
- Two Wireless headsets
- One charging base
- One Type-c charging line
- 1 manual
FCC Warning
15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the CC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>