Skytech GBS-8220 Professional HD Game Board Instructions
- September 19, 2024
- Skytech
Table of Contents
- GBS-8220 Professional HD Game Board
- Product Information
- Specifications:
- Connecting the Output Monitor (VGA Monitor):
- Connecting CGA, EGA, or YUV Output from JAMMA Connection:
- Q: What types of signals can the GBS-8200 convert to VGA?
- Q: How do I connect my VGA monitor to the GBS-8200?
- Q: What connections do I need for the JAMMA connection?
GBS-8220 Professional HD Game Board
“`html
Product Information
Specifications:
- Model: GBS-8200
- Function: Converts CGA, EGA, and YUV to VGA
- Compatibility: Connect older equipment to VGA TFT monitors or
new HDTVs with VGA input
Product Usage Instructions
Connecting the Output Monitor (VGA Monitor):
Connect your VGA monitor to the GBS-8200 by following these
steps:
-
If your monitor uses a 15-pin DSUB connector, connect it to the
VGA OUT connector (sometimes labeled P4). -
If your monitor has a ribbon cable, connect it to the 12-pin
VGA header.
Connecting CGA, EGA, or YUV Output from JAMMA Connection:
Connect the output from your JAMMA connection to the GBS-8200
using the steps below:
-
If your JAMMA connector already has a 5 pin RGB input header
wired up, connect it there. -
If not, use the included 5 pin RGB adapter cable and make the
following connections:- Red Video to Red Wire/P11 (R)
- Green Video to Green Wire/P11 (G)
- Blue Video to Blue Wire/P11 (B)
- H. Sync to Gray Wire/P11 (S)
- V. Sync to Yellow Wire/P11 (VS)
- Ground Ref to Black Wire/P11 (GND)
Frequently Asked Questions (FAQ)
Q: What types of signals can the GBS-8200 convert to VGA?
A: The GBS-8200 can convert CGA, EGA, and YUV (component)
signals to VGA.
Q: How do I connect my VGA monitor to the GBS-8200?
A: If your monitor uses a 15-pin DSUB connector, connect it to
the VGA OUT connector. For monitors with ribbon cables, use the
12-pin VGA header.
Q: What connections do I need for the JAMMA connection?
A: If your JAMMA connector already has a 5 pin RGB input header,
connect it there. Otherwise, use the included adapter cable for the
necessary connections.
“`
GBS-8200: This GBS-8200 manual covers the configuration, operation, and
troubleshooting for the GBS-8200/GBS-8220. It converts CGA, EGA, and YUV
(component) to VGA. This allows you to connect older equipment to VGA TFT
monitors or to new HDTVs that have a VGA input.
GBS-8220 Board Layout and Diagram
No GBS-8200 manual would be complete without a board layout and diagram! The
board is laid out as follows:
GBS-8220 Manual: Basic Configuration and Installation
Connect the output monitor (your VGA monitor) to: The VGA OUT connector
(sometimes labeled P4), if your monitor uses a 15-pin DSUB connector. To the
12 pin VGA header if your monitor has a ribbon cable.
Connect the CGA, EGA, or YUV output from your JAMMA connection to:
The 5 pin RGB input header if your JAMMA connector already has one wired up
(most common).
Or, use the included 5 pin RGB adapter cable and make the following
connections: o Red Video to Red Wire/P11 (R) o Green Video to Green Wire/P11
(G) o Blue Video to Blue Wire/P11 (B) o H. Sync to Gray Wire/P11 (S) o V. Sync
to Yellow Wire/P11 (VS) o Ground Ref to Black Wire/P11 (GND)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>